Gecko Models 1/35 Cruiser Tank A10 Mk 1A CS
- Thread starter Bigfoot57
- Start date
Hi that looks good, will follow along. I've built a few Gecko kits now, including figures and I have found them to be pretty good overall.
I seem to remember reading about Gecko Models. I think they are a relatively new company based in Hong Kong although their manufacturing is done in China. Looks a nice kit. Individual track links 
I have built a couple of gecko kits they go together well
Well so far I’m not impressed with this. there are imprecise lugs for attaching pieces too which need you to drill them out
Gaps everywhere and the instructions are not that great either in showing where pieces actually go thankfully most of the interior will be hidden from view once the outer shells are added.
Gaps everywhere and the instructions are not that great either in showing where pieces actually go thankfully most of the interior will be hidden from view once the outer shells are added.
So 1st off apologies for the lack of updates. This is due to the construction which is turned out to be a real tour de force and I’m still only halfway through it now so what have we done?
First off, I’ve now added the wheels to the main body and given it a coat of paint to see what the finish looks like the colour being Portland Stone and light purple then we’re onto building the tracks which supposedly is simple on the jig supplied and clip them together well that doesn’t work, at least they didn’t for me so it was my method of doing it, which was glue the links together and while they were still wet wrapped them around the sprocket that formed the circular part of the track then the Long straight bit was just joined on the end as you can see from the photographs this process is currently being repeated for the other side and I envisage another week before they will be ready also had added the headlamps to the front and drill a small hole in the back of them and inserted a piece of wire represent the cable drilled through the top of the glacis plate and tucked away and hidden from sight
First off, I’ve now added the wheels to the main body and given it a coat of paint to see what the finish looks like the colour being Portland Stone and light purple then we’re onto building the tracks which supposedly is simple on the jig supplied and clip them together well that doesn’t work, at least they didn’t for me so it was my method of doing it, which was glue the links together and while they were still wet wrapped them around the sprocket that formed the circular part of the track then the Long straight bit was just joined on the end as you can see from the photographs this process is currently being repeated for the other side and I envisage another week before they will be ready also had added the headlamps to the front and drill a small hole in the back of them and inserted a piece of wire represent the cable drilled through the top of the glacis plate and tucked away and hidden from sight
Last edited:
So the tracks are finished at last they may not look how they should do but there is best of what I can come up with they should look okay plus the fact you won’t see most of it as it will be hidden by a skirts to go on the sides for anyone contemplating on doing this model there are approximately 480 track links to be assembled to make the two tracks so good luck with that it took me nearly 2 weeks to assemble
Next up will be the start of the superstructure along with the Machine guns
Next up will be the start of the superstructure along with the Machine guns
So with the running gear out of the way and the tracks we now move onto the main body starting with the top section 1st off is the assembly of the machine gun on the front glacis fairly straight forward this was just a couple of pieces and a bit of painting afterwards next we move onto the main section of the top adding storage boxes which for some reason the one on the right had a large gap at the rear hence the white filler
After this came the exhaust simple job gluing the plastic pieces together however the lower photo etch piece was far to thick to bend into a curve as it was so we had to anneal this piece
To do this you heat the piece up in a flame until it changes to a bluish tinge let it cool down if you’ve done it correctly you should be able to easily bend it because you’ve changed the chemical composition of the metal. You’ve either removed the copper or removed the zinc I’m not sure which one it is but it makes it a lot more pliable
After this was done, I then joined the two pieces of photo etch to the plastic using CA glue then mounted it onto the top section of the tank
Once it had dried it was painted using a mixture of acrylic paint which consisted of silver ,grey ,ochere ,reddish brown and brown that produced the sort of rusty effect that I wanted
After this came the exhaust simple job gluing the plastic pieces together however the lower photo etch piece was far to thick to bend into a curve as it was so we had to anneal this piece
To do this you heat the piece up in a flame until it changes to a bluish tinge let it cool down if you’ve done it correctly you should be able to easily bend it because you’ve changed the chemical composition of the metal. You’ve either removed the copper or removed the zinc I’m not sure which one it is but it makes it a lot more pliable
After this was done, I then joined the two pieces of photo etch to the plastic using CA glue then mounted it onto the top section of the tank
Once it had dried it was painted using a mixture of acrylic paint which consisted of silver ,grey ,ochere ,reddish brown and brown that produced the sort of rusty effect that I wanted
Last edited:
Coming on nicely
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.