Theme editor

Scale Model Shop

Nissan GTR. R35

As usual, I'm amazed that you manage to get such a good finish using rattle cans.
Pete
 
Thread owner
its all about the prep i use mr super clear top coat there is a nack to it without polishing
 
its all about the prep i use mr super clear top coat there is a nack to it without polishing
When I use rattle cans I get runs and orange peel, or it's too dry. Can't seem to get the distance right.
Pete
 
Thread owner
When I use rattle cans I get runs and orange peel, or it's too dry. Can't seem to get the distance right.
Pete
beleive it or not i don't have a spray booth i use the emergency stairs in my building seems to be the right conditions and well lit think the secret is light coats and lots of 3000 sanding sponge after final top coat


i do a few clear coats first is mist coat then a more wet coat left to cure for 10 minutes then a heavier coat which gives the shine
 
I'm not bad with a spray gun or airbrush, it's just rattle cans I struggle with.
Pete
 
Thread owner
i struggle with an airbrush more used to rattle can but everyone has their neiche
 
Back
Top