Theme editor

Scale Model Shop

Search results

  1. S

    SimonT - 1/35th Tamiya T62 (well worn)

    Thanks all Mike, I shall try and keep the technical jargon to a minimum for you :thumb2: There has been a bit of progress on this one today Broke out the new copper foil - nice stuff. Very thin so it cuts easily, but more rigid than pewter, so ideal for the track guards Also finished off the...
  2. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    since the surface was impervious to all the thinners types I decided to re-spray so this is how it now looks it has also had a coat of AK Ultra Matt this time rather than Tamiya so AK over AK - less chance of anything reacting I shall leave it all to sit for a while now before tackling any...
  3. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    just taken this - not looking too good:disappointed:
  4. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    Gave it a few coats of 'green for grey green' filter which helped blend the various modulation tones together and give a more green tinge to the colour once this dried I coated with Tamiya X22 to give a gloss shine then once that had dried it got a coat of 'brown wash for green' so it now...
  5. S

    SimonT - 1/35th Tamiya T62 (well worn)

    Morning all - bit more done last night finished shaping the cheeks - now about twice the original depth and a better profile added the turret ring shot deflector bar thingy - made from two lengths of micro strip, curved and stuck back to back the mounting tabs were CA'd to the side of the...
  6. S

    SimonT - Tamiya 1:35 Sturmmorser Tiger (AAGB)

    Scottie / Steve - cheers This one is still progressing, albeit slowly Various tweaks done for shading and streaking various bits Buff Oilbrusher used to fade the colours together Test fit of one track
  7. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    4BO has been flying - attacked it with the AK modulation set Looks less green in reality - more grey/green
  8. S

    SimonT - 1/35th Tamiya T62 (well worn)

    sanding back and shaping of the cheek parts well under way
  9. S

    SimonT - 1/35 Tamiya MG Teams Cosford2020

    already modded it at lunchtime Ron - have chiselled part of my frame to make it look more like it has a frame behind the outer thing. That's as good as it gets - I will try and do better next time :smiling4:
  10. S

    SimonT - 1/35 Tamiya MG Teams Cosford2020

    I can safely say I have never installed a window in my life so am probably wrong but in that case please explain what this is - I have always thought they were window frames. Have I got the wrong terminology? All the window frames I’ve added to models over the years have been done with angled...
  11. S

    SimonT - 1/35 Tamiya MG Teams Cosford2020

    squared off a length of sprue and then used it to make a bit of window frame the green goop seems to be dry now so should be able to try carving in some detail
  12. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    handbrake and gear lever added missing window frames added to windscreen and a wiper to top edge - looking at reference photos showed that the upper and lower windscreen sections only had frames on three sides fire extinguishers got some brackets to hold them on the cab front end got some...
  13. S

    SimonT - 1/35th Tamiya T62 (well worn)

    Could be John :tongue-out3: They might not like the green look though Jim Scottie - I have massaged the tube to try mix the contents but not the standing part so will give it a try, ta ground out the turret figure bins, added 3No. new pins around the left aperture and filled the air bubbles...
  14. S

    SimonT - 1/72 PST ZIS-5-BZ Fuel Truck

    Morning all, bought this for the under a fiver build but decided it was a waste of time just slapping it together to create something I wouldn't be happy with so it got promoted to a proper build Started Saturday evening and had it mostly finished by last night - very speedy by my usual...
  15. S

    Tamiya 1/35 Panzer 111.

    Morning John, sorry for being tardy, only just come across this :smiling4: I have this very kit in the part constructed pile - started enthusiastically as usual then got diverted by something more interesting but will get back to it eventually Are you not feeling well? It isn't Russian That...
  16. S

    SimonT - 1/35th Tamiya T62 (well worn)

    the cheek parts were doubled in depth by adding strip and filler to the underside of them this extra material was then sanded back to refine the shape to more closely match the reference photos once offered up to the hull it became clear that the basic shape of the top of the kit part was also...
  17. S

    SimonT - 1/35th Tamiya T62 (well worn)

    reshaping of the cheek parts underway also started assembling the gun barrel bits but couldn't get a decent photo
  18. S

    SimonT - 1/35th Tamiya T62 (well worn)

    morning all, The turret ring side cheeks are way too shallow so I have added a couple of strips to them and clamped in place with pegs They will then need some work with the filler to put the curves back
  19. S

    Help identifying a car wreck

    30's Ford maybe?
Back
Top