Search results
-
Macchi M.E. 72 AMP kit
Well to say this has been challenging would be an understatement, not the kit as much as me i think someone once said “your ambition out weights your abilities“ the curve on this was definatly learning but almost there couple of pictures not perfect but im starting to like it i have the super...- simontie
- Post #9
- Forum: Aeroplanes Under Construction
-
Simon's Mandalorian Razor Crest, Revell 1/72
Hi well not quite finished … well iv only just opened the box box art and sprue shots attached, need to finish off another wee project first Simon Sorry last picture is a bit blurry i will change it out next time i post- simontie
- Thread
- Replies: 53
- Forum: Jakko's Movie/TV star GB: Mar - May '23
-
Macchi M.E. 72 AMP kit
Well not really my bag but seen this racing plane and thought it would be nice to build, its 1/48 scale and after my last 8th scale build it’s tiny.. but ill give it my best shot. Box art & sprues. I have managed most of the sparce cock pit not with out it’s issues and needs painted still but...- simontie
- Thread
- Replies: 26
- Forum: Aeroplanes Under Construction
-
Honda road racer 1/8th scale
Tricky kit but turned out ok, im pleased with the out come could have improved a few bit and polished off a wee bit better but all in DONE Simon- simontie
- Thread
- Replies: 9
- Forum: Completed Civilian motorcycle s
-
Honda road racer 1/8th scale
Well managed to get the fairing finished its not perfect but i’m happy with it hope to complete the bike this week, see how it goes simon- simontie
- Post #70
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Ok slightly longer than a weekend ( i did other stuff) but stripped of the decals and pin stripes and masked them up, so a couple of mistakes on my part, i did the boarder line first and I can see a shadow underneath the number panel, nose is slightly mis-shaped but I might live with it if i...- simontie
- Post #67
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
hi all couple of more pictures tank and seat now fitted with decals applied looks quite nice so far. these when on no bother and the mud guard one was the same still setting but easy to apply, the exhausts I bonded to the under side of the frame to hold them in place the fairing will also...- simontie
- Post #58
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
k well just about there!!! my axle rod arrived on Monday so I have fitted both wheels and fitted the rear end permanently shocks and wheel along with the rear brake rod I made. The exhausts these had grills moulded into them so I scrapped and sanded these off along with the heavy seem I think...- simontie
- Post #53
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Just a trial fit need to wait for the axles to come, but starting to look like a bike :smiling4: not great picture‘s but my make shift clip on’s turned out quite well and i made a new rear brake rod linkage I also cut the throttle and ht leads down so they fit under the cross bar, see what the...- simontie
- Post #49
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
hi all well 2 steps forward and 3 back or what ever they say? took the swinging arm off as it just didn't sit pretty as you can see the tube that the swinging arm shaft should spin on is like a a banana and the shaft was short by 2 or 3mm. sorry not so obvious in the picture, So after some...- simontie
- Post #45
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Ok busy weekend but don't seem any further on, managed the engine in to frame drilled the mounts and screwed it together, had a look at the front end and decided to drill out the centre pins that hold the front wheel i have an axle for it but this might just be glued each end.. forks are a bit...- simontie
- Post #40
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Well spent a bit of time puttting a shock absorber together out of a few bits and pieces as the kit ones are wrong red and they look … so i came up with this a bit of old sprue, some stainless wire and an spare mono shock bottom from Tamiya Kit. this is as far as i got with it needs cleaned...- simontie
- Post #37
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
hi all, slow week here but… I have managed a few small steps further wheels painted so all done, frame cleaned and painted still in two halves, mega amount of scraping and sanding to get all the flash off (assume thats the right phrase?) engine primed and painted, oil tank, swinging arm and...- simontie
- Post #31
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Quite weekend so i have pieced some of the engine together lot of flash and mis matched parts in most cases i have just cut off the dowels and lined up by eye, lots of dressing up there seems to be a glaze over most of the parts i suspect a primer for the heavy chrome plating that took an age to...- simontie
- Post #24
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Thursday yippee, ok well managed to complete the rear wheel and it looks ok fitted the tyre for effect i need to paint the wheel now once i clean it all up started the front as you can see one side complete but a lot to do before i start the other side.. also I bought a new dermel drill stand...- simontie
- Post #23
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
First side done nipples still loose discovered i can true it up once all the spokes are in an then i will start trimming the excess and setting the nipples to hold it in shape. (Hopefully round) second side 9 left to go will try and get this one laced up tomorrow then start the front :surprised:- simontie
- Post #19
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Hi, well started the rear wheel but due to the size of the hole i cut and centre pin diameter I used, I packed it out with 4 packers and wrapped the centre pin to achieve a snug fit not tight same with packers i also Cut and glued some pads on the bottom of the jig hole to lift the rim so it...- simontie
- Post #15
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
No going back now… so i tried the formed nipple on the end of the spoke and it fits and works but very stiff to bend and lift over the hub on a real wheel you are left with play on the rim to move it left and right along with up and down but i cant do this with the scale wheel unless i put all...- simontie
- Post #12
- Forum: Civilian Motorcycles under construction
-
Honda road racer 1/8th scale
Hi well a non productive night build wise anyway so i was experimenting with spokes and came up with a new jig for the wheels based on the last one, if it ant broke…..new centre pins i can remove if these fit the next kit others planned are 1/9th so might be close. then i made a small anvil out...- simontie
- Post #9
- Forum: Civilian Motorcycles under construction
-
Movie/TV Show GB Chat Thread
Tada arrived yesterday- simontie
- Post #99
- Forum: Jakko's Movie/TV star GB: Mar - May '23
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.