Theme editor

Scale Model Shop

1/35th scale academy tiger1early version (with interior)

Status
Not open for further replies.

col68

New member
Joined
Nov 16, 2016
Messages
1,505
Reaction score
0
Points
0
1/3
Thread owner
Hi guys I finally made a start on this kit. I know its a fairly old kit with some issues but I've been waiting for a while to get my hands on one.
I made a start on the hull interior and rear bulkhead. The torsion bars are slightly to long and needed shaving down and the locating pins needed removing from the hull to get the correct fit the hull is slightly warped at the rear but it was an easy fix with a clamp and glue. The exhaust stack has some major mould lines that needed removing and the shrouds at the top are a bit fiddly to assemble. Here's the first set of pictures of the hull
 

Attachments

  • 20170930_221558.jpg
    20170930_221558.jpg
    2.5 KB · Views: 0
  • 20171003_192455.jpg
    20171003_192455.jpg
    2.4 KB · Views: 0
  • 20171003_192509.jpg
    20171003_192509.jpg
    2.6 KB · Views: 0
Good luck if it's anything like my Takom King Tiger!!! ;)

Dry-fit everything, build separate modules that you attach when you know the other nearby modules fit. Paint often.
Oh, also watch out for the carpet monster! He ate one of my valve cover caps which had to be scratch built to fix the problem...
Did I mention paint often? If not then paint often!
 
Thread owner
Managed to get some more work done on my tiger. I have assembled the drive train and power pack and some of the cooling system. Just need to add some piping to the engine before starting to paint the interior
 

Attachments

  • 20171009_210015.jpg
    20171009_210015.jpg
    2.5 KB · Views: 0
  • 20171009_210044.jpg
    20171009_210044.jpg
    2.5 KB · Views: 0
  • 20171009_210105.jpg
    20171009_210105.jpg
    2.6 KB · Views: 0
  • 20171009_210125.jpg
    20171009_210125.jpg
    2.5 KB · Views: 0
  • 20171009_210143.jpg
    20171009_210143.jpg
    2.3 KB · Views: 0
  • 20171009_210208.jpg
    20171009_210208.jpg
    2.5 KB · Views: 0
Thread owner
Hi all haven't had much of a chance to get to the bench for any length of time as I have just started a new job and been working some mental shift patterns. I had managed to get the lower hull interior assembled and painted.
 

Attachments

  • 20171104_182202.jpg
    20171104_182202.jpg
    2.4 KB · Views: 0
  • 20171104_182240.jpg
    20171104_182240.jpg
    2.4 KB · Views: 0
  • 20171104_182253.jpg
    20171104_182253.jpg
    2.8 KB · Views: 0
  • 20171104_182307.jpg
    20171104_182307.jpg
    2.5 KB · Views: 0
  • 20171104_182139.jpg
    20171104_182139.jpg
    2.9 KB · Views: 0
  • 20171104_182122.jpg
    20171104_182122.jpg
    2.9 KB · Views: 0
  • 20171104_182113.jpg
    20171104_182113.jpg
    2.6 KB · Views: 0
  • 20171104_182054.jpg
    20171104_182054.jpg
    2.9 KB · Views: 0
Only just seen this post Col, nice work so far. I've got this kit in the stash, but I'll wait until you've finished yours so I know where all the problems are. :D
 
Cracking job so far Colin matey. I've had this one in the stash for years, I'll get around to build it one day now i've seen yours.

Have fun, John
 
Thread owner
Managed to get a bit more done between shifts. I used an oil wash to dirty the fighting compartment up a bit.
 

Attachments

  • 20171112_182940.jpg
    20171112_182940.jpg
    2.4 KB · Views: 0
  • 20171112_182953.jpg
    20171112_182953.jpg
    2.6 KB · Views: 0
  • 20171112_183007.jpg
    20171112_183007.jpg
    2.8 KB · Views: 0
  • 20171112_183127.jpg
    20171112_183127.jpg
    2.6 KB · Views: 0
  • 20171112_183140.jpg
    20171112_183140.jpg
    3 KB · Views: 0
  • 20171112_183201.jpg
    20171112_183201.jpg
    2.7 KB · Views: 0
Status
Not open for further replies.
Back
Top