Theme editor

Scale Model Shop

1/72 U-boat 249

  • Thread starter Thread starter Guest
  • Start date Start date
Status
Not open for further replies.
G

Guest

Guest
Thread owner
hello Gentleman My name is Glenn and I'm based out of Norfolk Virginia and this is my first post,my subject is U-249 Late 1945,my problem is finding the right color, the photos I have shows her next to U-1023 and U-249 is much darker I'm using WARSHIP PICTORIL#27 and what I can on the web can someone point me in the right direction I'm posting photos of my build at it's current state thank's Glenn
 
Thread owner
\ said:
Hi Glenn,Have a look at this 1/72 Revell Type VIIC U-boat model

Sav.
Hi Sav and thanks for taking the time to help. I'm going try to post two photos one in BW one in color, the one in color is of U-805. The tug color is N-5 navy blue and looks correct so the color on the sub is close to the true color and is not one of the aforementioned colors on the site, now looking back at the BW photo U-1023 is in DG51 and U-249 is much darker, do you think U-249 may be using the same color as U-805? thank's Glenn

View attachment 16461

View attachment 16462

View attachment 128987

View attachment 128988
 
Thread owner
Its going to be pretty hard to say for sure. Alot of these boats went through different colours/shade/camo schemes depending on the captains preferance and what paint was left and the dockside. Ceratinly looks a darker shade on the b&w photo.
 
Thread owner
\ said:
Its going to be pretty hard to say for sure. Alot of these boats went through different colours/shade/camo schemes depending on the captains preferance and what paint was left and the dockside. Ceratinly looks a darker shade on the b&w photo.
Hi Mankster the directive late in the war was to darken the boats to hide from hunter aircraft when at periscope depth. I also understand there was an attempt to camo the decks to break up the sillohette of the subs at periscope depth I have matched the color of U-805 spot on ,but I'm going hold off and make sure before I commit,but your right about them using what ever paint they had on hand, thank you for your help. Glenn
 
Thread owner
\ said:
Hi Mankster the directive late in the war was to darken the boats to hide from hunter aircraft when at periscope depth. I also understand there was an attempt to camo the decks to break up the sillohette of the subs at periscope depth I have matched the color of U-805 spot on ,but I'm going hold off and make sure before I commit,but your right about them using what ever paint they had on hand, thank you for your help. Glenn
Hear are some photos of the build
 
Thread owner
Nice one Glenn,

looking good, i'm doing one myself depicting U-69 here http://www.scale-models.co.uk/under-construction/5116-1-72-revell-u-69-a.html if you would like to take a look. Keep the pic's coming.

All the best,

Sav.
 
Thread owner
\ said:
Nice one Glenn,looking good, i'm doing one myself depicting U-69 here http://www.scale-models.co.uk/under-construction/5116-1-72-revell-u-69-a.html if you would like to take a look. Keep the pic's coming.

All the best,

Sav.
Thank you Sav,very nice! what are you using on the bottom of your hull? [the dark vertical lines.]I've just finished installing the deflector above the bridge and the engine telegraph compass and voice tube. I'll post some pics. I will inevitably build three totally -- the first one is U-249; U-96 and an early V-11C/41 U-522. I'm looking forward to seeing your continuing progress on your boat. It looks very good.

Glenn

View attachment 16488

View attachment 16489

View attachment 16490

View attachment 16491

View attachment 16492

View attachment 16493

View attachment 129014

View attachment 129015

View attachment 129016

View attachment 129017

View attachment 129018

View attachment 129019
 
Thread owner
imageproxy.php


I'm assuming you mean these vertical lines?

If so then it's Mig pigments mixed with white spirit and painted on with a fine brush. I'll scrub these down a bit to stop them appearing so stark.

Sav.
 
Thread owner
\ said:
Nice one Glenn,looking good, i'm doing one myself depicting U-69 here http://www.scale-models.co.uk/under-construction/5116-1-72-revell-u-69-a.html if you would like to take a look. Keep the pic's coming.

All the best,

Sav.
these black lines
 
Thread owner
OHHhh!......them, God it's so obviouse now!

They are 3 dimentional tranfers, yes, THREE DEE!! They come from Archer fine transfers under thier surface details range and are a good way of adding the missing weld beads. You use them in the same way you would any decals. They are quite expensive but i managed to get away with using only one sheet. Have a look here ARCHER AR88005

You might like to do a quick Google on them as there are sites showing them applied and weathered.

Hope this helps,

Sav.
 
Thread owner
\ said:
OHHhh!......them, God it's so obviouse now!They are 3 dimentional tranfers, yes, THREE DEE!! They come from Archer fine transfers under thier surface details range and are a good way of adding the missing weld beads. You use them in the same way you would any decals. They are quite expensive but i managed to get away with using only one sheet. Have a look here ARCHER AR88005

You might like to do a quick Google on them as there are sites showing them applied and weathered.

Hope this helps,

Sav.
Thank's Sav ,I've never heard of these before,very cool look's like they would save alot of time. I've always hade to make my own thank's for the info .I will check in to them and your boat looks realy realy good. Glenn
 
Thread owner
\ said:
Thank's Sav ,I've never heard of these before,very cool look's like they would save alot of time. I've always hade to make my own thank's for the info .I will check in to them and your boat looks realy realy good. Glenn
Hear are some more photos of the flash supperssors for the one 37mm and the four 20mm deck guns,made from sheet brass, enjoy Glenn

View attachment 16503

View attachment 16504

View attachment 16505

View attachment 16506

View attachment 16507

View attachment 129029

View attachment 129030

View attachment 129031

View attachment 129032

View attachment 129033
 
Thread owner
\ said:
Hear are some more photos of the flash supperssors for the one 37mm and the four 20mm deck guns,made from sheet brass, enjoy Glenn
Hi all, here are some updated photos of the U-249 build, the 3.7mm and the 20mm AA gun were added and the FPR-DF loop antenna. Some more hand grabs as well, enjoy. Glenn

View attachment 16592

View attachment 16593

View attachment 16594

View attachment 16595

View attachment 16596

View attachment 16597

View attachment 16598

View attachment 129118

View attachment 129119

View attachment 129120

View attachment 129121

View attachment 129122

View attachment 129123

View attachment 129124
 
Thread owner
\ said:
Hi all, here are some updated photos of the U-249 build, the 3.7mm and the 20mm AA gun were added and the FPR-DF loop antenna. Some more hand grabs as well, enjoy. Glenn
Hello Gents,[update on U-249] -- Progress on the sub is coming right along. I've added some new details -- kind of a "finding waldo" kind of a thing. I've added the hand rails with the safety cables and the stern and bridge flagpoles; the ship's horns on the stern of the main gun deck, I've added the electrical conduits. I've added the electrical outlet on the front of the bridge, and I decided to cut out the plastic on the navigation lights stern and primary gun deck hand railing scratch built out of plexigalss. The boat is about 90%, and then I'll begin the heavy painting and weathering. Glenn

View attachment 16665

View attachment 16666

View attachment 16667

View attachment 16668

View attachment 16669

View attachment 16670

View attachment 129191

View attachment 129192

View attachment 129193

View attachment 129194

View attachment 129195

View attachment 129196
 
Thread owner
\ said:
Hello Gents,[update on U-249] -- Progress on the sub is coming right along. I've added some new details -- kind of a "finding waldo" kind of a thing. I've added the hand rails with the safety cables and the stern and bridge flagpoles; the ship's horns on the stern of the main gun deck, I've added the electrical conduits. I've added the electrical outlet on the front of the bridge, and I decided to cut out the plastic on the navigation lights stern and primary gun deck hand railing scratch built out of plexigalss. The boat is about 90%, and then I'll begin the heavy painting and weathering. Glenn
Hello Gent's here are some more updated pics of the U-249 build.I added more hand rails on the 3,7mm gun deck using plastic rod, and the lock down handles on the base of the 20mm gun mounts,regards Glenn

View attachment 16678

View attachment 16679

View attachment 16680

View attachment 16681

View attachment 129204

View attachment 129205

View attachment 129206

View attachment 129207
 
Thread owner
Wow,

This is looking really good Glenn, a very clean build which ain't easy with some of the PE you are using. Keep the pic's coming.

I'm back to working on U-69 after running out of steam for a while!! Will post some updates when something interesting is completed!

Sav.
 
Thread owner
Amazing levels of detail in this model Glenn, that tower is looking superb.
 
Status
Not open for further replies.
Back
Top