Edward FW190A8 1\48

[Guest]

Thanks Guys.

Have made the wire i found in me tackle box painted it yellow bent it and stuck it in ,Not that easy...

Massive hands tiny wire.

Gonna put some oily gunk in the wheel wells

And some canon residue in the wing and nose placements,and gotta wire up the nose guns.

Thanks for looking and all advice gladly received and used.

Cheers

Martin

[Guest]

Better pics

Will get the big guns out tomorow cos i even put the little brass wire retainers on.

Cheers again

Martin

PS; don't suppose you know what the two circular things are behind the top guns?

[Guest]

mighty fine work you are doing ace

mobear

[Guest]

Thanks Mobear

Today gonna fill a few gaps then prime it do the black line thing then put a thin coat of alclad2 ,That stuff is amazing but a bugger to clean out of me airbrush couldn't afford the alclad ab cleaner but tamiya thinner's do it ok.

With what i've learn't from you guys the bf110 will have cables and wires added as i build cos it's fiddley as hell to fit them after everyting is glued and sealed,It'll make things alot easier,so thanks to every one.

Cheers

Martin

ps;any one got the blue prints for the wire loom of a BF110

[Vaughan]

There's some great detail going on there Martin.

Vaughan

[Guest]

great work so far... what else to say

I'm following and enjoying

Roman

[stona]

Excellent stuff! Now you mustn't forget your brake lines.

Flexible hose at the top into an anodised aluminium brake line running down the front of the strut.

Into another flexible hose.

The aluminium brake line was a brown colour,not black.

The flexible hoses were this colour.

Or black.

The cable connected to the rotating drive,disappearing up through the top of the wheel well was part of the tail wheel retraction system.

Cheers

Steve

[Guest]

you are gonna be demented fitting it all lol,class job so far though

mobear

[Guest]

Thanks guys, Steve photos are excellent more fiddley bits,I'll increase my Diazapan and Morphine.

Have put the Primer on last night ,Photoes to follow, that vallejo primer goes on lovely.

Thanks again for all your help

Cheers

Martin

[Guest]

AAAAAAAAARRRRRRRRRGGGGGGGGGGGGGGGG!!!!!!!!!!!!!!!! !!f*********b******c*********m******f******A****** s*******G**F**B*****C****...........:soapbox::rant ing2::sobbing:ain::lala::death::AR15firing::bigmistake::asshole: :zoo_taz::whatever::smile3:

Done everything i've learnt off you guys everything was coming along nicely just finished adding wireing and hydrolic lines cos i asked for help and you guys helped know end, So i'd primed it last night looked really nice then today i filled in all the lines like you guys didn't look to bad but my hands shake real bad any way didn't take any pics left it to dry, then got the Alcad2 Alluminium loaded the airbrush and started sprayingtop if the plane went on lovely turned it over sprayed away missus called me for me pills and a cup o tea went back to model room to be greeted by alcad crazy paving on most of the underside of me FW190. Cos it had cured tryed to wipe it off to no avail. any sugestions would be greatly appreciated,As i'm Gutted.

was too pi**ed of to take pictures of the crazy payving.

Rant over,Trying to hard

Martin

Patients is a virtue am not a virteous

[Guest]

Hey Martin,

Yes... alu paints can be very very tricky... but... this is alu layer just for afterwards chipping effect or main color of Fw?

Let solve that in start...

Roman

[Guest]

Hi Roman how yo doin?

yes alli paint is for worn and chipped parts of plane the top of plane and both sides of wings.

The main crazy paving is underneath at the rear, so should be easy to cover up with some primer.

Have been carefully rubbing the affected parts with tamiya thinners and cotton buds and that has flattened it out, so am gonna try that this morning.

Heres hopeing

Martin

[Guest]

still awekening, coffe in front of me and waiting to glued canopy on seatta dry

try with some sanding paper, very nice sanding paper... eg. #2000 grid

ROman

[Guest]

Cheers Roman can always count on you for good advice, will post pics later to show progress.

Of to the model room now.

Martin

[Guest]

Martin,hope you get it sorted . I'm with Roman a light wet sanding w/2000 should do it.