I did a bit of a build thread here:
So this is a 'Mistel 1', 'White 2' of 2./KG 101 as seen at St Dizier, France in June 1944. A Mistel was a combination aircraft, in this case a Bf 109 F-4 and a Ju 88 A-4 from which the cockpit was removed and replaced with a warhead. This was the SHL (Schwere Holladung) 3500. It contained 1,700 Kg of explosive in a hollow charge. The electrical crush fuses for the explosive are at the end of a 2.75 m probe, a hollow chamber lined with soft metal (aluminium and copper were used), giving the device its nick name 'Elephantenrussel' or elephant's trunk. For those not familiar with hollow or shaped charges, when the explosive (70% Hexogen/30% Trinitrotoluol) at the back of the warhead was detonated it would focus its force on the soft metal liner which would liquefy and project forward at 20 times the speed of sound. Test showed that this jet could penetrate 8m of armoured steel or 20m of concrete.
History lesson over, here's some pictures of the completed model.
The kits are from the Italeri Mistel boxing. They were both fairly stress free. Paints are a mixture of Colourcoat and Humbrol enamels. Final varnish a mixture of Klear and Vallejo matt to give a satin(ish) finish.
Cheers
Steve
Edit: I've just noticed that the Bf 109 has shed its tail wheel! If I ever find it I'll stick it back on
So this is a 'Mistel 1', 'White 2' of 2./KG 101 as seen at St Dizier, France in June 1944. A Mistel was a combination aircraft, in this case a Bf 109 F-4 and a Ju 88 A-4 from which the cockpit was removed and replaced with a warhead. This was the SHL (Schwere Holladung) 3500. It contained 1,700 Kg of explosive in a hollow charge. The electrical crush fuses for the explosive are at the end of a 2.75 m probe, a hollow chamber lined with soft metal (aluminium and copper were used), giving the device its nick name 'Elephantenrussel' or elephant's trunk. For those not familiar with hollow or shaped charges, when the explosive (70% Hexogen/30% Trinitrotoluol) at the back of the warhead was detonated it would focus its force on the soft metal liner which would liquefy and project forward at 20 times the speed of sound. Test showed that this jet could penetrate 8m of armoured steel or 20m of concrete.
History lesson over, here's some pictures of the completed model.
The kits are from the Italeri Mistel boxing. They were both fairly stress free. Paints are a mixture of Colourcoat and Humbrol enamels. Final varnish a mixture of Klear and Vallejo matt to give a satin(ish) finish.
Cheers
Steve
Edit: I've just noticed that the Bf 109 has shed its tail wheel! If I ever find it I'll stick it back on

Comment