Fujimi 1/24 Lambourgini Countach LP5000 Quatrovalvale

[Guest]

Looks good man

[takeslousyphotos]

Looks good man

Thanks Ray.......... We are rapidly heading for the moment of truth. Can I get a gloss finish on it or not ????

[takeslousyphotos]

Primer coat is on ........... There were a couple of blemishes it showed up. They are sorted and final primer coat primer is now on ........... How long do you guys reckon I should leave it before I go for the colour coat ????


[ATTACH]111287.IPB[/ATTACH]

[ATTACH]111288.IPB[/ATTACH]

[ATTACH]111289.IPB[/ATTACH]

[ATTACH]111290.IPB[/ATTACH]

[ATTACH]111291.IPB[/ATTACH]

[takeslousyphotos]

The colour coat is on ........ Not a bad finish. There are a couple of dust particles it has picked up ops: I'll let it cook off for a couple of days then flat down with a very fine finishing pad ....... A couple of decals then a couple of gloss laquer .... See if I can get a shine to it...............


[ATTACH]111376.IPB[/ATTACH]

[ATTACH]111377.IPB[/ATTACH]

[ATTACH]111378.IPB[/ATTACH]

[ATTACH]111379.IPB[/ATTACH]

[ATTACH]111380.IPB[/ATTACH]

[ATTACH]111381.IPB[/ATTACH]

[ATTACH]111382.IPB[/ATTACH]

[ATTACH]111383.IPB[/ATTACH]

[papa 695]

That colour is looking awesome Peter and some great work so far

[takeslousyphotos]

That colour is looking awesome Peter and some great work so far

Thanks Ian..........Much appreciated.

[takeslousyphotos]

I am getting proper hacked off with this kit............ I should never have bothered with a part built kit in the first place.


I've finished the paint on the bodywork with a couple of coats of clear laquer and it looks pretty good. ................. and the drivers side door hinge has jammed and snapped off at the pivot under the front wing. So that leaves me with either doors fixed open or doors fixed closed. and I've found a tiny patch on each side on the lower windscreen that hasn't painted properly. I guess it was covered by the front of the doors in the upright position, so now I have to try to paint those in by hand ............ I have all the light fittings and vents done so it's all ready for the finally assembly............


......... But right now I fell like chucking the lot in the bin.

[Paul Davies]

Looking good. Part built kits are always a bit of a gamble

[john i am]

I am getting proper hacked off with this kit............ I should never have bothered with a part built kit in the first place.
I've finished the paint on the bodywork with a couple of coats of clear laquer and it looks pretty good. ................. and the drivers side door hinge has jammed and snapped off at the pivot under the front wing. So that leaves me with either doors fixed open or doors fixed closed. and I've found a tiny patch on each side on the lower windscreen that hasn't painted properly. I guess it was covered by the front of the doors in the upright position, so now I have to try to paint those in by hand ............ I have all the light fittings and vents done so it's all ready for the finally assembly............


......... But right now I fell like chucking the lot in the bin.

Don't let it beat you now. Your on the home straight with the finish line in sight. It looks great and with just a few more hours work will be completed and will look great I'm sure. So chin up and get it done. Eagerly awaiting the finished result and as I'm sure all the hardwork and patience will eventually pay off.

[Guest]

I am getting proper hacked off with this kit............ I should never have bothered with a part built kit in the first place.
I've finished the paint on the bodywork with a couple of coats of clear laquer and it looks pretty good. ................. and the drivers side door hinge has jammed and snapped off at the pivot under the front wing. So that leaves me with either doors fixed open or doors fixed closed. and I've found a tiny patch on each side on the lower windscreen that hasn't painted properly. I guess it was covered by the front of the doors in the upright position, so now I have to try to paint those in by hand ............ I have all the light fittings and vents done so it's all ready for the finally assembly............


......... But right now I fell like chucking the lot in the bin.

You must be joking! It still looks great, you have done a good job buddy. Once it's all polished up and the doors done it will be fine

[Robert1968]

Heh Peter


Just rescanned all you progress on this and well what can I say? Blinking right on the nose on every way, I like the gunnie colour ( are tyou polishing up or leave as is ( either way will look great )


Never throw anything in the bin as you will always regret it later!! I tried that with a 1/48 spit vb once from bad paintwork and finish but I had to pay another £20 to get it right in a new kit ( my wife stil nags me about that)


So as the other chaps have said chin up ( remove a couple of pins to let off the steam have a night off a few beers or a whiskey ( I drink malt just for future ref) and then with clear head go back to Lamborghini and finish her the way you planned


Job done!


Few cans in the bin


Whiskey drank


Lambo complete


Everyone's a winner


Go for it Peter


Regards


Robert


( ps forget my medication today o_Oo_Oo_Oo_Oo_O

[takeslousyphotos]

Thanks fellas ........ Rant over. I'll get back on it and finish it tomorrow........and Robert, I reckon the satin finish looks better in Gunmetal than the gloss

[Guest]

Have one door open one closed fujimi do a figures set with a woman in a bikini have her sitting g in passenger seat just a suggestion but looks OK to me

[monica]

that looks nice Peter do like the blue/silver color if i got it right,

[takeslousyphotos]

that looks nice Peter do like the blue/silver color if i got it right,

Thanks Monica......... Yes it photographs that sort of colour. But it is Gunmetal grey.