Noticed that the base is now warped! Only slightly, so not catastrophic, but it is noticeable.
I just used a plain foam board (5mm) but its had various coatings put on it during the build, eg: PVA, mod podge, modelling filler, Ammo/Mig mud coating, primer, several top coats of paints, pigments, scatter materials with more PVA, etc. etc.
My plan is to put some thin Balsa strips all around to edge the base, so these will hopefully cover up the warped edges, and as its meant to be a woodland/forest base, its highly unlikely that it was perfectly flat anyway, so....
But what would the groups hive mind recommend to either stop the warping in the first place, or as an alternative base material?
Cheers
I just used a plain foam board (5mm) but its had various coatings put on it during the build, eg: PVA, mod podge, modelling filler, Ammo/Mig mud coating, primer, several top coats of paints, pigments, scatter materials with more PVA, etc. etc.
My plan is to put some thin Balsa strips all around to edge the base, so these will hopefully cover up the warped edges, and as its meant to be a woodland/forest base, its highly unlikely that it was perfectly flat anyway, so....
But what would the groups hive mind recommend to either stop the warping in the first place, or as an alternative base material?
Cheers
Comment