"Ease up Old Timer, we need your help!" Foucarville, 7th June 1944

[scottie3158]

Ron, Very simple and very effective

[spanner570]

Thanks Paul.
They are of course, the first rushes!

My turn to get me coat!

[spanner570]

second rush...


Darker foliage. I think the top bits of the rushes need to be a bit thinner.

Back to the old drawing board.

Ron

[spanner570]

Final stab at this.
I've thinned the tops down a bit.
It's the best I can hope for. I've just noticed a few of the reeds have temporarily stuck together, that is why some of them appear too wide.





Cheers.

Ron

[Guest]

They look good to me Ron.

I'd be very happy if I'd produced something like that :thumb2:

[Mickc1440]

They do look good Ron

[Jim R]

Hi Ron
Looking good. What are they made of? Very realistic.
Moses in his basket is nicely done and very well hidden.
Jim

[spanner570]

Hi Ron
Looking good. What are they made of?
Jim

Thanks boys.
Jim - The reeds are just bits of thin paper cut with a Stanley Knife ( other makes are available!) Then painted with different shades of green acrylics.
The rushes are thin bits of straight twig.
Mix all together with a bit of thunkin'. Try, then bin. Try, then bin again until it looks something like what you are aiming for.

[spanner570]

I managed to get 453 over during the Bank Holiday. We have made a rough and ready lean-to frame for the mill owner.

Balsa strip where the wood won't be seen and cut down coffee strirrers where it will.








Tin roof next.....

Cheers.
Ron

[Jim R]

Hi Ron
Cheating, cheating - getting in a professional! :tongue-out3: Just remember to frisk him for matches.
Good idea and it looks just right. Thanks for the info on the reeds. I knew that an idea of yours would be simple but, as always, effective.
Jim

[spanner570]

'Scuse me, I had 50 years or so hacking timber about. He was my apprentice, and couldn't even make a proper brew, let alone cut a piece of timber correctly!

Don't worry Jim, I coated the timbers with a fire retardant before he arrived on site!

Glad to be help with the reeds and good to see you are still hanging on in with the build too.

Ron

[Gern]

and couldn't even make a proper brew, let alone cut a piece of timber correctly!

Don't be so harsh on the lad Ron! Brewing the perfect cuppa for your boss is really hard. I worked as a driver for about 5 years and never advanced beyond the official rank of tea boy!

[scottie3158]

Loving the work and the banter.

[Mini Me]

Excellent progress 570.

[spanner570]

Thanks for the posts chaps.

....... and the banter.

Paul, it's difficult for me to function without it. It's been my life's blood - And long may it carry on so.... :upside: :thumb2:

Bit more progress on the lean-to.
Timbers stained. I had to do this bit. 453 cleared off!
Then I had to put up with the grebe scarpering off with the paint brush!








Typical, isn't it? To save a few bob, the mill owner said he had some corrugated sheets hanging around somewhere, so decided to finish the roof off himself!

Just look at them. Bent, trodden on and the profile all but disappeared. "They'll keep the water out. What more do you want?!" was his reply to my asking why it was such a balls up!





When I finally finish the area around the mill. I'll do all the weathering proper in one go. Including the tin sheets.

Cheers.
Ron