"There's an old mill by the stream, Nelly Dean!"

[spanner570]

Here is the work I did on the bridge. This stage will more or less bring us up to date with progress....

If you recall, the initial bridge build had wall extensions running on to the road.....Why I cut them off I don't know, 'cos it looks well sawn off! Luckily I didn't bin the ends so....

[ATTACH]83044.IPB[/ATTACH]


I've replaced, and bent them....For the hell of it really!

[ATTACH]83045.IPB[/ATTACH]


[ATTACH]83046.IPB[/ATTACH]


I didn't like the sheer sides below the bridge, so I got my fingers to work and literally picked the polystyrene away until I was happy with the stream bank.....Don't be afraid to do this sort of thing, it's all part of the diorama fun!

[ATTACH]83047.IPB[/ATTACH]


[ATTACH]83048.IPB[/ATTACH]


First coat on the 'stones'. I'll probably do something with them later, we'll see....

[ATTACH]83049.IPB[/ATTACH]


Next up, more work on the bridge and then the road is added.

Cheers,

Ron

[spanner570]

The bridge continues.......but before that, I decided to add a small wall to square off the area by the mill doors.....

[ATTACH]83055.IPB[/ATTACH]


[ATTACH]83056.IPB[/ATTACH]


[ATTACH]83057.IPB[/ATTACH]


Here is the first stage of the road. The sub-surface was PVA'd, then floor sweepings were sprinkled on...Job done!

[ATTACH]83058.IPB[/ATTACH]


I also added another section of bridge wall.

[ATTACH]83059.IPB[/ATTACH]


This shows all the extra walls fixed and the road surface ready for a bit more work. I think the brain storm of bending the walls adds a bit of variety.

[ATTACH]83060.IPB[/ATTACH]


Here is the bridge area thus far....with the addition of some green paint

[ATTACH]83061.IPB[/ATTACH]


That, good friends brings us up to date...well yesterday, before I butchered my finger!!

Now the main model is laid down, I need to think about starting to bring the model to life, so I've been sitting looking at the dio. and have come up with some ideas.

So next installment will hopefully involve getting started on some add-ons...

Thanks for looking,

Ron

[Guest]

Still so interesting Ron, although I'm surprised you haven't found a use for your lost blood! Perhaps a dye for a future build?

I'm definitely going to try & replicate your effects on the walls etc - I think a dio is coming into my mind!

[monica]

wow Ron ,looking great the little bits off altering have payed off, the bridge and road looks great

you have do so well to blend in all the stone walls and make them uniformed,

little changes make alot of diffidence to things ,

sorry to hear you cut your hand/finger, i could use the blood for my next one, oh lol, only jking hope its not to bad

looking forword to next update

[Alan 45]

This is cool Ron , every time I look at this i just think wow !

[flyjoe180]

Very good work Ron, this is looking very realistic.

[spanner570]

Thanks for the great posts everyone.......also the wound has closed up a bit, so I'm able to do a bit more!

I've started to add a bit of detail now and putting them in, as and when the idea comes along.

Here I've added a rustic fence to stop people being chopped up by the wheel.....

[ATTACH]83154.IPB[/ATTACH]


A rudimentary 'Wheel clamp thingy'

[ATTACH]83155.IPB[/ATTACH]


Some paving slabs. These are 1/72 scale 3ft x 2ft and I've painted them in different shades of beige to break the blandness up a bit. I've purposely cut them into individual pieces to make them more natural and uneven when laid.

[ATTACH]83156.IPB[/ATTACH]


Here they are laid, complete with a diddy bench!

[ATTACH]83157.IPB[/ATTACH]


I laid some outside the house and also did a bit of groundwork...same as the bridge surface.

[ATTACH]83158.IPB[/ATTACH]


The surface here is a slurry of cement laid on with a brush to simulate rough concrete...

[ATTACH]83159.IPB[/ATTACH]


Another coat of varnish....This one I've confined to the center of the stream. See how it's smoothed out the middle a bit, but left the water below the steps still rippled, also the mill race appears deeper now, which was what I wanted.....

[ATTACH]83160.IPB[/ATTACH]


The second coat...see the slight difference?

[ATTACH]83161.IPB[/ATTACH]


I hope you like these 'add-ons'

Cheers,

Ron

[Lee W]

Wow Ron! This is unbelievable, just when I think 'Ron has done an exceptional job on this dio, there's nothing more to add, it's great! '...BANG there you go, add some here add some there...is there no end!? :P

Exceptional work, it really is outstanding Ron

Lee

[Guest]

just by watching this build i think we can all learn from it,it really is awesome and the water spectacular

mobear

[spanner570]

Lee and Ole, thank you both for your posts.....

Plenty more to come yet, I hope. Trees and general vegetation. Finish the water and add some sort of figures. Loads more weathering....That'll do for now!

[papa 695]

Stunning work Ron But it's what we have come to expect from you mate

[monica]

wow Ron you never cease to amaze , all the little bits of detail,just add to the feeling of the place, its amazing your skills,

looking real great, what are you going to surprise us with next

[eddiesolo]

Lovely work Ron, just amazing as it all comes together.

I may have missed it...more than likely...but what varnish have you used for the water effects, also does it dry or remain tacky?

Si

[Alan 45]

Ron that is incredible work this is going to be a masterpiece

And don't get sticking an optimistic doo dab on my post you modest chap lol

[Guest]

Thanks for the great posts everyone.......also the wound has closed up a bit, so I'm able to do a bit more!I've started to add a bit of detail now and putting them in, as and when the idea comes along.

Here I've added a rustic fence to stop people being chopped up by the wheel.....

[ATTACH]83349[/ATTACH]

A rudimentary 'Wheel clamp thingy'

[ATTACH]83350[/ATTACH]

Some paving slabs. These are 1/72 scale 3ft x 2ft and I've painted them in different shades of beige to break the blandness up a bit. I've purposely cut them into individual pieces to make them more natural and uneven when laid.

[ATTACH]83351[/ATTACH]

Here they are laid, complete with a diddy bench!

[ATTACH]83352[/ATTACH]

I laid some outside the house and also did a bit of groundwork...same as the bridge surface.

[ATTACH]83353[/ATTACH]

The surface here is a slurry of cement laid on with a brush to simulate rough concrete...

[ATTACH]83354[/ATTACH]

Another coat of varnish....This one I've confined to the center of the stream. See how it's smoothed out the middle a bit, but left the water below the steps still rippled, also the mill race appears deeper now, which was what I wanted.....

[ATTACH]83355[/ATTACH]

The second coat...see the slight difference?

[ATTACH]83356[/ATTACH]

I hope you like these 'add-ons'

Cheers,

Ron