The attack of the black death in Stalingrad.

[Richi72]

Hi Moni,

well this is something, it’s getting better and better every time i look. I must say that the student is becoming the master!!!

nice touch with the lights really enjoy watching your builds.

Cheers Richi

[monica]

so glad that you are liking it so far Barry,Scott

have the gutters / downpipes made and just need to fit and weather them,

ta Ken yes i do understand that Dio of the wiring, as i need to look for a way if ,i cannot or do not have room inside the lamp poles,

to run back to the power unit that should fit in the stair well in the big building

oh Ken im so sorry that im such a pain with this led stuff some things im good at wiring well ,as you know lol, ops:

dont mean to give you a head ache

[ATTACH]84267.IPB[/ATTACH]

[ATTACH]84268.IPB[/ATTACH]

[ATTACH]84269.IPB[/ATTACH]

[ATTACH]84270.IPB[/ATTACH]

[ATTACH]84271.IPB[/ATTACH]

[ATTACH]84272.IPB[/ATTACH]

[ATTACH]84273.IPB[/ATTACH]

[ATTACH]84274.IPB[/ATTACH]

[monica]

hi Richi, so glad to see you again my friend, well with yourself and Ron, but how could I, not lean from and do you the honer of nice work

and so glad that you are liking it and all the great comments from everyone are real appreciated

[Guest]

Hi moni I could get a better idea if the wiring diagram was founded the right way when I turn my playbook round so does the pic sorry.

[monica]

i think thats the right way around it just would not load the right way,

[ATTACH]84279.IPB[/ATTACH]

[flyjoe180]

The super work continues. Looking great Monica

[Guest]

Hi moni where are your negative wires going.

[monica]

ta Joe do appreciate the so nice comments

don,t they run to ground pins,?

or run back as well as the reds do ? and you know what i was thinking the same thing

and to make the circlet you need a black as well,

[Guest]

Yes moni the blacks have to end up back at the negative pole of the batteries as the red has to end up at the positive pole of the battery. Are you using pp9 battery if so I will wire up 3leds with a simple switch if you are running 3 leds and using a pp9 battery that's a 9 volt battery and 3 led at 3.2 volts = 9.6 volts you won't need any resistors because 9 volts will still be enough to light them up, you won't notice the slight dimming of .6 of a volt, just means the battery will drain slightly quicker. If you wanted the full brightness of the leds you would have to wire the leds 2 and 1 and then you would need a 150ohm resistor and a 470 ohm resistor. Personally I would just put all three to the bat I doubt you would notice the drop in brightness.

[monica]

ta Ken i think is is easy to wire all 3 leds back, as the little bit dimmer there are the better i think as i dont wont over bright ,

nice i like the sound of not messing with resistors, the power unite dose have a switch on it , so i dont need to try and work out which 2 pins to use out of the 3 or 4 thats on them,

so i can loop them all back to were i think i can have the power unit, then just need to wait on that to come,

and these leds do have some type of resistors, on them but what ohm i dont know,

i did find this cart of what each color is,

[ATTACH]84332.IPB[/ATTACH]

[ATTACH]84333.IPB[/ATTACH]

[Guest]

Caught up again Moni, brilliant work this will look something special when its finished

Paul

[eddiesolo]

Just pure and simple... wonderful.

Si

[monica]

hi Paul / Si thank you both for such great comments do real appreciate, it

well i have the Marder all done,

well wired in and set the street lamp, they did work,, just gave them a touch with a 12v ,to test, ops:

added the down pipes and gutters waiting on glue to dry before weathering them,

and got a little done on the sniper base colors and camo on,

so its just about after noon kip time,

waiting on power unite to finish off the lamps , and then can get the rest off the base finished, because still need to run wires some were, but were i dont know ????

hope you liking it so far,

[ATTACH]84334.IPB[/ATTACH]

[ATTACH]84335.IPB[/ATTACH]

[ATTACH]84336.IPB[/ATTACH]

[ATTACH]84337.IPB[/ATTACH]

[ATTACH]84338.IPB[/ATTACH]

[ATTACH]84339.IPB[/ATTACH]

[ATTACH]84340.IPB[/ATTACH]

[ATTACH]84341.IPB[/ATTACH]

[ATTACH]84342.IPB[/ATTACH]

[ATTACH]84343.IPB[/ATTACH]

[Guest]

That's looking the dogs dangly bits moni and you've put your signature bit in the headless soldier (should be some blood spurting out of a wound like that though) glad you got those pesky leds sorted, can't wait to see the finished dio.

[monica]

ta Ken , oh lol let again you make me smile and lough , so glad that your liking it, do real appreciate you kind words keeps me going

I do do that alot ha the head less men, maybe i should try a mutant zombie one lol,