Gravity Feed Bottles

[Guest]

Hi - I have just been given an Iwata compressor and an Iwata BCR Airbrush. Have never used an airbrush before but have worked out how it all seems to work but I am missing a Gravity Feed bottle and Adaptor. Have checked in the ScaleModelShop but no luck. Where can I buy one from?

Thanks

Rod

Sorry - Have just realised that its a "SIPHON" feed bottle I need

[Guest]

Have a look on eBay, most of the airbrush shops sell them. I can recommend absolute airbrush, I've used them before.

Cheers

Patrick

[John]

Have a look here at the Airbrush company all the parts you need for your airbrush

[Guest]

Thanks for the fast response. Having taken a look at the Airbrush Company site and looking into it a bit deeper, bearing in mind that I will be using the Airbrush for military models 1/35 scale, should I be looking at exchanging my IWATA BCR for a Gravity feed unit as, from what I can see, these use smaller amounts of paint?

Rod

[John]

I personally prefer a gravity fed airbrush, like you said you use much less paint, you can use as little as a few drops, this isn't really an advert but depending on budget the Revolution CR is probably the best if your going to be using things like Alclad, or the Neo CN if not

[Guest]

Hi John - Do you do "Part-Exchange"?

Rod

[John]

No sorry as everything I sell is new so I wouldn't be able to sell it on, you could put it on ebay or see if anyone one the forum would be interested.