The Great TOON challenge. Chat thread

[SteveH]

Hi Gang

I'll shall try this one

Lets see what happens
Steve H

[Guest]

Hi Gang

I'll shall try this one


Lets see what happens
Steve H

Good morning Steve and welcome to the GB, this one builds up very nicely and if you are inclined there are one or two little upgrade you can add, but the most important part of the build is to have fun, good luck.
Pete.

[Guest]

Hi everyone The Great "Toon"challenge is now under way if you want to join in just jump in and start a build thread, you don't need to ask.
Pete.

[Guest]

Hi, Jim mentioned dry fitting yesterday the only downside is that dry fitting is a problem as once the two parts are together they are some times very hard to separate. I soon learnt that early on with the toon tanks, I should have mentioned it, far be it for me to tell any of you how to build but a quick sand around the connecting pins and you can get them apart again without damage, the other tip is to cut 3/5mm of the smaller connecting pin the male one, that is best one I have found.

I would also recommend that you thoroughly wash the tank tracks, on the last two toons thay were very oily and even the sprues had a slight oily feel.

I haven't come across a glue that won't glue these together yet and I glue everything on.
Pete.

[Jim R]

Hi Pete
Definitely sound advice. The Meng kit I have is so well engineered that it really could be built without glue as it says on the box.
Jim

[Ian M]

Can I remind every one that the thread title of your build MUST include builders name, the model name and the make. In this build we will let the scale bit slide.

[Marty]

Hi Pete.....another one for the merry band!!...i was enjoying watching the builds but didn't have any notion of joining in but while i was trawling for some info on chinese vehicles for another build i came across this....


Just could not resist and ordered straight away..digital camo??hmmmmmm.......will get thread up and running as have already started to build......cheers Marty

[Guest]

Hi Pete.....another one for the merry band!!...i was enjoying watching the builds but didn't have any notion of joining in but while i was trawling for some info on chinese vehicles for another build i came across this....

[ATTACH=CONFIG]n1086443[/ATTACH]
Just could not resist and ordered straight away..digital camo??hmmmmmm.......will get thread up and running as have already started to build......cheers Marty

Hi Marty you are most welcome, but remember once you join the dark side there is no going back :tongue-out3::upside::tongue-out3: post away my friend when it arrives .
Pete. :thumb2:

[Dave Ward]

Question?
Where do we put the 'completed' thread & pics? under the normal completed aircraft/tanks/ships sections, or is there somewhere special for the toons?
Dave

[Guest]

Question?
Where do we put the 'completed' thread & pics? under the normal completed aircraft/tanks/ships sections, or is there somewhere special for the toons?
Dave

Hi Dave I've asked management the question and I'm waiting for feedback.
Pete.

[Guest]

Hi Dave I've asked management the question and I'm waiting for feedback.
Pete.

Hi this what management have come back with.
All the finished builds from all GB's go in the relevant sections.
So tanks in the armour section, ships in the ship section .
Of you look each completed section has a bit for completed GB's.
The build thread can end with a couple of pictures as a teaser, and a link to the completed build pictures.

Pete.

[Jim R]

Hi Pete
Have you seen THIS. The popularity of 'Toons' must be growing.
Jim

[Guest]

Hi Pete
Have you seen THIS. The popularity of 'Toons' must be growing.
Jim

Hi Jim, I have but thank you for posting it, it's very big in Far East especially at there model show with big money prizes and if you think I upgrade them, think again they make mine look very very amateurish.
Pete.

[Guest]

Hi just a heads-up there is only one month left so there's still time to enter if you want to, as most of you know Ian is kindly running the GB now.
Pete.

[stu1664]

Please count me in as my contribution will be this:


Just need to get my order into John tout suite!!
Stu