1/72 AirfixF-18A Hornet

[Guest]

Peter.
And they say my bench is bad ! :smiling3::smiling3::smiling3:
.

[stillp]

Peter.
And they say my bench is bad ! :smiling3::smiling3::smiling3:

Not just the bench John, the whole room!
Well I emptied the recycling wheelie bin this morning, and didn't find the parts I wanted. :disappointed2: I did find this though:

One of the blade aerials. Shame I've already bodged scratched them. Guess I'll have to do the same for the Sparrow hardpoints. I can't find a good online picture of what I need to make, and judging from what I can find there are several design variations of the hardpoint so I won't be too wrong! What I need to make has to fit to the groove on the fuselage with a bit sticking out to fit to the recess between the fins on the missile:

The tricky bit will be the upward (downward in the photo) angle of the front of the 'groove' in the air intake, as well as making two of the beggars that are near enough a mirror image of each other. I think I need to buy some plastic strip thick enough to file the shape I want out of.
Pete

[Guest]

Easily missed then Pete, looked just like a tab. Good find though.

Think you should wear the crown for the untidy bench/ room from now on, I feel I've let the side down seeing those photos.:smiling3:

[stillp]

Thanks John. I'll have to wear the crown - I've nowhere else to put it.
Pete

[stillp]

I'm going insane, or senile, or more likely both. Popped down to The Model Shop in Northampton to buy various bits of plastic sheet, rod, strip, etc. Just sitting down wrestling with how to make something to attach the Sparrows to, and it struck me that they fit very well onto what's already there... I'd already fitted those "missing" parts!
Panic over, but I think I need to lie down in a darkened room until relative sanity returns.
Pete

[Guest]

Seeing your success at locating missing things, can I hire you to investigate the case of my missing knife blade, that happened earlier tonight? I dropped my knife to the floor, saw it fall, and when I picked it up, the blade had fallen out. Despite crawling around on my hands and knees with a light, I’ve not found it yet … a No. 11 blade can’t just disappear, I would think, but it has.

[stillp]

Take your shoes and socks off Jakko and just walk about barefoot. You'll soon find it.
Pete

[boatman]

Seeing your success at locating missing things, can I hire you to investigate the case of my missing knife blade, that happened earlier tonight? I dropped my knife to the floor, saw it fall, and when I picked it up, the blade had fallen out. Despite crawling around on my hands and knees with a light, I’ve not found it yet … a No. 11 blade can’t just disappear, I would think, but it has.

Jakko the carpet monster has got that lol
chris

[stillp]

There are some decals that go on the u/c doors and on the centre line fuel tank as well as the missiles, so I've left the bay doors on and given the underside, tank and missiles a clear coat. I'm using Galeria gloss - their matt is so good the gloss has to be good too I hope.
Pete

[Guest]

walk about barefoot. You'll soon find it.

I’d just get bits of plastic sticking in my feet

Jakko the carpet monster has got that lol

Linoleum monster in this case

[stillp]

The first 20 decals are on:

Still a couple more to go on the underside, but I need a break!
Pete

[boatman]

Still a couple more to go on the underside, but I need a break!
Pete

NOT to long a break Pete I hope
chris

[stillp]

OK Chris, here's the rest of them:
After they've had a matt coat I'll open up the wheel bays then make a start fitting these

Pete

[stillp]

Just kidding, here's a few more:


Getting this close to it shows I should have been more patient with the sanding and filling, but it's too late now.
Pete

[Guest]

Photos like these always show more problems than you spot with the naked eye. I don’t usually think this is a problem, for exactly that reason