Scale Model Shop

Collapse

Allen's (V2) F-108 Cable Reel Trailer for SimonT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Allen Dewire
    • Apr 2018
    • 4741
    • Allen
    • Bamberg

    #1

    Allen's (V2) F-108 Cable Reel Trailer for SimonT

    Afternoon all,

    As some of you may remember, I attempted this build once before for my V2 rocket project. After building most of it, I realized the dimensions were all wrong. The compartments were too high and not wide enough and the wheelbase was too short. Now is the perfect time to get this one right....

    For those who are not familiar with this trailer, I will offer a little background as to what I am building.....A short history.

    A V2 rocket battery had over 100 vehicles in it and the launching of the V2 required lots of cables to perform the pre-flight checks and services, as well as the actual launch itself. When the rocket was launched, the cables attached fell away and got burned by the rocket propellant flames. The battery need lots of replacement reels to continue the launches. There were 2 cable reel trailers for this job. The F-110 small reel trailer carrying 8 cable reels and the F-108 large cable reel trailer carrying 56 cable reels. It also had 2 reel carts for rolling out the reels and some reels of commo wire too. I'll be building the large one...

    This is the materials being used for this project,

    Click image for larger version

Name:	IMG_2181.JPG
Views:	3
Size:	4.1 KB
ID:	1136039

    The basis kit is from Das Werk. The body of the trailer will be scratched from Evergreen plastics and the reels are from my last attempt. A huge thank you goes to Jim (Jim & Samson) and Paul (Scotty3158) for their generosity supplying the reels and bits....

    The sprues,

    Click image for larger version

Name:	IMG_2211.JPG
Views:	1
Size:	4.0 KB
ID:	1136040

    Click image for larger version

Name:	IMG_2213.JPG
Views:	2
Size:	5.0 KB
ID:	1136041

    Click image for larger version

Name:	IMG_2212.JPG
Views:	2
Size:	4.8 KB
ID:	1136042

    Click image for larger version

Name:	IMG_2210.JPG
Views:	2
Size:	3.3 KB
ID:	1136043

    Click image for larger version

Name:	IMG_2214.JPG
Views:	1
Size:	4.0 KB
ID:	1136044

    I do have a few more reels not shown. I will only be using the trailer from the bed down, The sides and ends will go in the spares box. The body and compartments will be scratched with Evergreen. With luck and beer, it should end up looking like this,

    Click image for larger version

Name:	F 108 Kabel Anh. Gr..jpg
Views:	2
Size:	2.6 KB
ID:	1136045

    Click image for larger version

Name:	F 108 Cable Trailer Large.jpg
Views:	1
Size:	2.5 KB
ID:	1136046

    Click image for larger version

Name:	F 108 Front Compartments.jpg
Views:	2
Size:	3.5 KB
ID:	1136047

    The 2 reel carts, spoked wheels and ladders will be included. I plan on having 5 doors open on one side for show. The others will all be closed....

    As I have no plans and only 6 pictures, I will be using my famous Gusgogo Guesstimation System for the build. I did this on my last attempt but the trailer was 1.5 cms too short, throwing all the other guesstimations out of whack. I will begin this project in about a week due to another project that must be finished (94% done) first....

    Sorry for the long BlaBla (Waffle), but I wanted to make sure you all know what I am building for this GB.....

    Prost
    Allen
    Life's to short to be a sheep...
  • Jim R
    SMF Supporters
    • Apr 2018
    • 15774
    • Jim
    • Shropshire

    #2
    Hi Allen
    BlaBla was interesting. I remember your first go at this. Should be fun and the sort of thing Simon enjoyed.
    Jim

    Comment

    • Mini Me
      • Jun 2018
      • 10711

      #3
      Looks like it is going to be a lot of fun Allen........I built one of these 5 tonners a couple years back and all I had was photos to work with. If the Guestimation system fails you, you can always try the WAG system.........a Wild Ass Guess always works!!! :tongue-out3:
      Rick H.

      Comment

      • Allen Dewire
        • Apr 2018
        • 4741
        • Allen
        • Bamberg

        #4
        Hi Again Folks,

        I forgot to add, that this being a half scratch project, one needs the proper tools to accomplish this task. The basics,

        Click image for larger version

Name:	IMG_2216.JPG
Views:	2
Size:	3.2 KB
ID:	1136061

        The heavy guns and etch set to make the spoked wheels,

        Click image for larger version

Name:	IMG_2217.JPG
Views:	1
Size:	3.4 KB
ID:	1136062

        I have to make the tires for the etch from scratch, hence the circle cutter and the chopper is to cut the dang doors square. Lastly, the most important item for this build,

        Click image for larger version

Name:	IMG_0286 (3).JPG
Views:	1
Size:	2.4 KB
ID:	1136063

        See you on the other side................

        Prost
        Allen
        Life's to short to be a sheep...

        Comment

        • Richard48
          SMF Supporters
          • Apr 2018
          • 1907
          • Richard
          • Clacton on Sea

          #5
          Good lord Dude.
          Thats some serious amount of jiggery pokery and scratch wizadry.A real bobby dazzler me thinks.
          Rich.

          Comment

          • Steve Jones
            • Apr 2018
            • 6615

            #6
            Its great to see something different from the norm Allen. You certainly have your work cut out with this project. Looking forward to it immensely. Good luck my friend

            Comment

            • Mini Me
              • Jun 2018
              • 10711

              #7
              Scholl, Allen, So progress on this project will be measured in "pints"........interesting concept Sir!
              Rick H.

              Comment

              • BattleshipBob
                SMF Supporters
                • Apr 2018
                • 6812
                • Bob
                • Cardiff

                #8
                Do like a bit of bla, bla, bla

                Count me in Allen, mind you not too many beers!

                Comment

                • Allen Dewire
                  • Apr 2018
                  • 4741
                  • Allen
                  • Bamberg

                  #9
                  Thank you all for your interest in my madness,

                  Rick, Gotta use what I know for measuring buddy! Oh and we only do half liters here.......

                  Jim, I am definitely going to get it right this time....I hope......

                  Richard, What you said my friend and nice to have you along for the ride.......

                  Stevie, I tried this a year ago and will do some comparisons to show the errors of my ways form them, along the way......

                  Bob, Nah Sir, only used In excess moderation to calm the nerves while building it......

                  Prost
                  Allen
                  Life's to short to be a sheep...

                  Comment

                  • minitnkr
                    • Apr 2018
                    • 7563
                    • Paul
                    • Dayton, OH USA

                    #10
                    Don't forget the Kevlar apron & thimbles. PaulE

                    Comment

                    • Allen Dewire
                      • Apr 2018
                      • 4741
                      • Allen
                      • Bamberg

                      #11
                      Hi Buddy,

                      I got them at the ready for next week. Hope you guys are well in Ohio and will drop a note to you tomorrow Paul......

                      Prost
                      Allen
                      Life's to short to be a sheep...

                      Comment

                      • Lee Drennen
                        SMF Supporters
                        • Apr 2018
                        • 7711

                        #12
                        Allen. Very interested how this goes I might try one of these in 1/48 scale. To me they look similar to Circus Wagons which I’ve build several and easy to get parts for.

                        Comment

                        • Fernando N
                          • Apr 2018
                          • 2448

                          #13
                          Top man for going at it again Allen :thumb2: :thumb2: , just take care with the beer and tools combo as there seems to be more sharp things than limbs to hurt on your bench…

                          Comment

                          • prichrd1
                            • Apr 2018
                            • 693
                            • Paul
                            • Conwy

                            #14
                            Allen,

                            Love these Das werke kits, this will be an interesting build :smiling: :thumb2::thumb2:

                            Paul.
                            :smiling:

                            Comment

                            • adt70hk
                              SMF Supporters
                              • Sep 2019
                              • 10435

                              #15
                              Oh my word....

                              Comment

                              Working...