Ian M's Mk VI, 1/48 Tamiya.

[Tim Marlow]

Should work but be careful with sticking it down, not sure where the cartridge paper comes into it.
A thing I have done in the past, is to make a paper mask from a photocopy then hold them in place with thin rolls of white tac. Thus holding g the mask just off the surface. Spraying directly at 90 degrees gives a nice soft edge.

Cartridge paper was a typo Ian….I meant photocopy paper.

[Tim Marlow]

Should work but be careful with sticking it down, not sure where the cartridge paper comes into it.
A thing I have done in the past, is to make a paper mask from a photocopy then hold them in place with thin rolls of white tac. Thus holding g the mask just off the surface. Spraying directly at 90 degrees gives a nice soft edge.

I have free handed Camo in the past Ian, spraying in towards the middle of the colour shape at about 120 degrees gives a pretty good soft edge as well. Not sure I’m enough up to speed with airbrushing these days to pull it off now though.

[The Smythe Meister]

Cartridge paper was a typo Ian….I meant photocopy paper.

..... OH!......
.......I thought you all were talking about a different type of paper ?:flushed:

[Tim Marlow]

..... OH!......
.......I thought you all were talking about a different type of paper ?:flushed:

Paper types and bond weights is not an area i want to stray into Bob…..just think of cartridge paper as heavy copier paper and you won’t be far out…..

[Ian M]

VERY nice work there Ian ,

Cheers Andy.

I have free handed Camo in the past Ian, spraying in towards the middle of the colour shape

I free handed my Lynx a while back as the mask up was a nightmare and there was far to much over spray. Did a respray 'free hand' Aided by some hair spray...

Cartridge paper was a typo Ian….I meant photocopy paper.

Now if you had said blotting paper I would not have batted an eye lid...Hmmm

[The Smythe Meister]

Paper types and bond weights is not an area i want to stray into Bob…..just think of cartridge paper as heavy copier paper and you won’t be far out…..

Dunno who Bob is ?....  BUT ...
I was thinking of a more, shall we say,"Toilet based", subject !!!
ANDY

[Tim Marlow]

Cheers Andy.

I free handed my Lynx a while back as the mask up was a nightmare and there was far to much over spray. Did a respray 'free hand' Aided by some hair spray...

Now if you had said blotting paper I would not have batted an eye lid...Hmmm

Not sure that would feed through my inkjet printer Ian? Sounds like a worthwhile idea if it could though. I just like the idea that damp paper moulds so well to a surface…..

[Tim Marlow]

Dunno who Bob is ?....  BUT ...
I was thinking of a more, shall we say,"Toilet based", subject !!!
ANDY :smiling3:

Sorry Andy. It was ‘er indoors’ birthday yesterday and I blame too much wine……trouble is I do this when I’m sober as well….
Toilet based products (actually kitchen based ones are better) work great for masking wheel wells and other sundry holes in the airframe. Just drop them in wet, and mould them to fill the void as you want, and let them dry. To get them out, just make them wet again….
Not sure they’d work well for Camo masking though….too flimsy.

[Ian M]

Not sure that would feed through my inkjet printer Ian?

No that would not end well. lol

If you have, or know someone that has, a laser printer... You could make a line drawing off the sheet, revers it in the editing software then print it out on the laser printer. Then the sneaky bit. Lay the print face down on the blotting paper, Iron with warm iron (the wife can show you how it works. :tears-of-joy: ) Ta daaaaaaaaa! The laser print is now on the blotting paper.
This also works for printing parts onto plastic or plywood sheet.

[Tim Marlow]

I no longer have easy access to a laser printer (or stand alone photocopier, which should do the same job) since I retired unfortunately. This discussion is raising ideas though. I wonder if a photocopy would stick to damp blotting paper well enough to allow successful cutting out of the pattern? If it does, we could recreate the rubber sheet patterns, used in the WW2 factories to create camouflage on the aircraft, from blotting paper

[langy71]

I no longer have easy access to a laser printer (or stand alone photocopier, which should do the same job) since I retired unfortunately. This discussion is raising ideas though. I wonder if a photocopy would stick to damp blotting paper well enough to allow successful cutting out of the pattern? If it does, we could recreate the rubber sheet patterns, used in the WW2 factories to create camouflage on the aircraft, from blotting paper

I once used a cut up latex glove to create camo patterns, it worked quite well if i remember correctly, not too sure how i stuck it down though. i probably used pva glue

[Ian M]

Anyway getting back onto the matter at hand.
I got the camo down Thursday after that well deserved Ice. The cue for soft ice was insane so we ended up getting an Italian Ice at the Cafe at the harbour.
Saw this while there! rather nice and VERY SMALL!

And very nice it was too!
Any how.
Today I had a bit of time so popped into the cave for a while.
Got some masks cut in frisk film for the codes and went for it:



Mixed up some Type S Sky and trying to keep overspray down I went at it.

Cross bar on the H is a bit wonky! bugger. lol


Mind you if you think the H is a bit wonky, you should see the tip of my airbrush needle...

Bagder Airbrush needle are indestructible I hear some place... Wrong. Knocked my airbrush on the floor. Hard laminat floor 1 Airbrush 0
Another thing that amazes me is the state of the needle. Not in the habit of studying them under a magnifier. I have seen smoother nails than that! No wonder I have been fighting with her the last few jobs. Having now shafted the needle I think that New Airbrush is a lot closer than it was yesterday..

[Mark1]

Well the mossie is looking a lot better than the needle!

[Jim R]

Cute littleCinquecento there Ian. Codes have come out well, much nicer than decals. As for the poor AB needle - OUCH!!

[The Smythe Meister]

Nevermind a slightly "wonky" looking H crossbar...... That's looking superb to me so far Ian
That camo is excellent and shows the size of these planes somehow?!!
It's just making me SO eager to start mine!!....
But,NO ,get behind me Satan.... I  must finish my Spitfire first!!
Cracking build Sir, looking forward to the next installment!
Andy