Paul's Trumpeter 1/32 Fairey Swordfish Mk.I

[tr1ckey66]

Hi and a very happy New Year to everyone!
It's really nice to be part of a group build again (thank you to Ian for suggesting this). This has proved to be a really popular subject for a GB and I'm seeing some really wonderful and varied entries even at this early stage.
This is my offering - the Trumpeter 1/32 Stringbag (Mk.1)!

I've been thinking of what I might do with this build and I think I've settled on a simple diorama. I'm hoping to depict an aircraft during the attack on the Bismarck. This adds a few complications to the build but I think this is very 'doable'. This diorama is by no means a first for the Swordfish and I have seen a couple of other builds along similar lines. Mine will (hopefully) be a little different to the dioramas I've seen, in so much as it will feature a motorised prop and a full crew. I can see a number of potential 'banana skins' up the road: 1. I need to alter/sculpt a 3 man crew (I have my base figures from ICM), 2. Balancing the prop when motorising 3. The seascape, which I would like to cast in resin (so that the torpedo can be seen in the translucent 'water', but may have to settle for some type of sculpt to hide the electrics.

Anyhoo, that's the plan here's the sprue shots..

.

[Ian M]

Nice one. I put the bigger full images in for you befor Boatman comes after you. lol.

[Jim R]

That's a real interest grabber. Quite a project. Will be very interesting to follow and see how you overcome the issues a dio like this will throw up.
Good luck Paul.

[papa 695]

What a nice kit Paul, and some really nice goodies to go with it.

[tr1ckey66]

Missing a couple of shots from the sprues as I could only upload 20 pics. Here's the rest (the second shot being the Extradecals sheet).
Thanks, P

[tr1ckey66]

Thanks guys I hope my efforts match your faith!
Cheers Ian, I thought I had pressed the 'insert full image' button but I think things just slowed up too much and it didn't register.
Thanks
P

[scottie3158]

Paul,
Chair pulled up.

[Andy T]

An ambitious plan, sounds excellent!

[Allen Dewire]

Paul, this is definitely gonna be a good 'un!!! Great to see you jumping into the GB. Lots of AM and a great plan too. I guess the interior is pretty detailed as Trumpy gives you clear fusi parts as an extra. Can't wait to see how this goes Sir!!!...

Prost
Allen

[colin m]

(this being a rotary engine)

Are you sure ? Rotary was a very early engine, used quite a bit around WW1. I'm nearly sure this is a radial.
But anyway, a 1:32 Strinbag, this will be great to watch being buitl.

[Waspie]

Are you sure ? Rotary was a very early engine, used quite a bit around WW1. I'm nearly sure this is a radial.
But anyway, a 1:32 Strinbag, this will be great to watch being buitl.

It was a Bristol Pegasus radial fitted in the Mk1.

[tr1ckey66]

Sorry, brain fart - Radial.

[yak face]

Fantastic choice paul , its a massively impressive beast in 1/32 , ive often been tempted to get this kit . The dio sounds excellent cant wait to see the build . Cheers tony

[tr1ckey66]

Thanks Tony. It is definitely a big ol’ bird in 1/32. Let’s see how it builds!

Regarding the engine. That will simplify things a bit - one less thing to worry about. I’ve edited my first post so as not to confuse things. Thanks for the heads up Colin

Cheers
P

[tr1ckey66]

So I've made a start to the Stringbag...
As usual things begin in the cockpit. I've started adding a few bits of etch from the Eduard set. The floor features a nice treaded pattern which should weather nicely and the various levers have braces and finer bits and bobs to busy-up the cabin. The upper deck of the cockpit and the pilots seat are not glued as I've yet to sculpt the pilot and it will be easier to paint. It's not a lot but it's a start!

I've also been thinking about how I'm going to go about mounting the aircraft on the seascape base and motorising the prop. My main concern is where to position the brass tube that supports the model in the fuselage (this will also supply the electric for the motor). This will be quite a heavy model when complete and very 'front heavy'. At the moment I'm thinking the brass tube will be positioned somewhere between (or just behind) the undercarriage but this will depend on how much space there is once the cockpit is in.

Going to try and get a bit more done tomorrow. Time is marching on and I'm aware I have a lot to do :flushed:
Cheers, Paul