Chieftain Mk.11

[Steve Jones]

Luvin the avatar Mike. While you are looking in I have a question for you. I am struggling to find a way/a tool for doing recessed circular grooves. The primary example would be the flat end of a shell. However there are others examples now and again where there is a need to scratch precise small circular grooves. Any ideas please??

[adt70hk]

That's turned out very nicely indeed

Very well done

Andrew

[Guest]

Luvin the avatar Mike. While you are looking in I have a question for you. I am struggling to find a way/a tool for doing recessed circular grooves. The primary example would be the flat end of a shell. However there are others examples now and again where there is a need to scratch precise small circular grooves. Any ideas please??

Hello Steve,
Sorry for the late reply. Back in the day when we were doing cave drawings I came across some scribing templates from a company called Tritool numbers TPU-301,302 and 303. These give you circles, ovals, squares etc. And the one you will need is TPU-301 and this starts in mm from 0 (yes zero) to 9.5 dia circles. These were offered in the day when you were re-scribing all the panel lines on the Fujimi 1/72 scale Phantoms.
Amazon now do the same item £23 and call it 'Hasegawa Trytool Template Set 1 # TP01' and in it you get the same as the Tritool set.
Cheers
Mike.

[Guest]

Steve,
Had to remove the original avatar, SWMBO claimed it was a bigger exposure than mine....

[Steve Jones]

Many thanks Mike. I will let you know how I get on. I have to scratch about 30 shell cannisters so they will be a great help. Many thanks again and happy modelling

[Guest]

Hoppity Hop , have a nice day in Luton , the bad lands of the south !

[scottie3158]

Mike,
Nicely done this was the last version I believe before being replaced by Challenger 1.

[Steve Jones]

Hello Steve,
Sorry for the late reply. Back in the day when we were doing cave drawings I came across some scribing templates from a company called Tritool numbers TPU-301,302 and 303. These give you circles, ovals, squares etc. And the one you will need is TPU-301 and this starts in mm from 0 (yes zero) to 9.5 dia circles. These were offered in the day when you were re-scribing all the panel lines on the Fujimi 1/72 scale Phantoms.
Amazon now do the same item £23 and call it 'Hasegawa Trytool Template Set 1 # TP01' and in it you get the same as the Tritool set.
Cheers
Mike.

Just had a gander on the old tinternet and the world of scribing sheets is enormous! Well I certainly learnt something new today so thank you for that. I will be ordering a few for Christmas time. In the mean time I found a cheapy harry one from Eduard so that's on its way and we will see how that goes. Many thanks

[Guest]

Hoppity Hop , have a nice day in Luton , the bad lands of the south !

[ATTACH=CONFIG]n1180798[/ATTACH]

And today I learned a new word 'Wibble'
The bad lands are quiet at the moment, some sort of religious thing going on so we have fireworks even today at 14.24 :rolling: Look chidren, can you see the pretty fireworks.... DUH!!!

[adt70hk]

Hoppity Hop , have a nice day in Luton , the bad lands of the south !

[ATTACH=CONFIG]n1180798[/ATTACH]

Bad lands indeed..... Luton is where I grew up and went to school!!!! All I can say is that it went down hill immediately upon my departure......

.... And if you believe that you'll believe anything!!

[Guest]

And today I learned a new word 'Wibble'
The bad lands are quiet at the moment, some sort of religious thing going on so we have fireworks even today at 14.24 :rolling: Look chidren, can you see the pretty fireworks.... DUH!!!

Ahh would that be Wibble Wobble, nearly as good as Hoppity Hop , and Hippity Hop. Its the New Year on the 29th, they cold be practicing.