Tamiya sdkfz 251/1 (ish)

[Guest]

Those bins are standard for the basic 251 ,all Ausf.s
Those etched bins look a lot better than the kit ones.
The starboard forward bin is usually a rifle rack otherwise the bins were used for anything that'd fit.
Jon.

Thanks Jon.
There aren't any bins on the standard Tamiya model I have, so I'll get 'em stuck on then!
There is a somewhat complicated kind of rack affair that I'm having a go at that (somehow) goes inside the forward end of the bins on both sides. I'm not confident at being able to fit all the bits in, so I may have to 'humour' them a bit :smirk:
I'll probably put a few other nits 'n pieces in the bins anyway, along with any spare weapons I've got. So what appears to be a rack is likely to be fairly well covered up...at least I think it'd be better if they were!

[rtfoe]

George, all the etch are going on well. Does improve the interior of the kit.

Cheers,
Richard

[Guest]

Looking good mate, keep going
John .

[Guest]

I’m wondering exactly what they were for

As Jon said there’s a rifle rack in the front one, holding four rifles horizontally against the hull side. The rear one is for general stowage, including vehicle equipment and passengers’ kit.

There aren't any bins on the standard Tamiya model I have, so I'll get 'em stuck on then!

The seat backs are part of the bins, so if Tamiya’s kit has those (I don’t remember …) then they probably figured they could double as the stowage bins.

There is a somewhat complicated kind of rack affair that I'm having a go at that (somehow) goes inside the forward end of the bins on both sides.

That would be the rifle rack You can probably get away with only actually building the top part and sticking one or two plastic rifles in it to hide everything below them.

I'll probably put a few other nits 'n pieces in the bins anyway, along with any spare weapons I've got. So what appears to be a rack is likely to be fairly well covered up...at least I think it'd be better if they were!

If you have some spare German infantry equipment, like canteens, rolled shelter quarters, etc. then putting those in will make the bins look busy. And, of course, some more generic things like nondescript bags, rolled cloth, a couple of machine gun ammo boxes, etc. will work well too.

[Guest]

As Jon said there’s a rifle rack in the front one, holding four rifles horizontally against the hull side. The rear one is for general stowage, including vehicle equipment and passengers’ kit.


The seat backs are part of the bins, so if Tamiya’s kit has those (I don’t remember …) then they probably figured they could double as the stowage bins.


That would be the rifle rack :smiling3: You can probably get away with only actually building the top part and sticking one or two plastic rifles in it to hide everything below them.


If you have some spare German infantry equipment, like canteens, rolled shelter quarters, etc. then putting those in will make the bins look busy. And, of course, some more generic things like nondescript bags, rolled cloth, a couple of machine gun ammo boxes, etc. will work well too.

Ah ha... it makes sense now. So I assume the butt end of the rifle is pointing aft?

[ATTACH]323794[/ATTACH]

Sadly the openings are a bit too narrow to get any rifle butt I have to hand...but I’ve bought quite a lot of infantry pieces lately so there’s bound to be something I can use.
There are no inside storage bins provided on this model...only one either side mounted above the track mud guards, but they’re moulded closed anyway.
Thanks

[Guest]

Ah ha... it makes sense now. So I assume the butt end of the rifle is pointing aft?

Yes, and if I recall correctly, the top of the rifle goes against the hull side.

Sadly the openings are a bit too narrow to get any rifle butt I have to hand...

You can always scrape them down a little with your knife. If you do this on the side that will face down, it won’t be visible at all on the built model.

Don’t forget to paint the inside of the rack and the rifles before putting them in, by the way.

[minitnkr]

The AA or squad MG can also go in one of the longer ones. PaulE

[Guest]

Hello George,
Coming along ok, and getting to grips with the etch. A small tip, On small parts use two pair of tweezers, I use a pointed set and a flat eyebrow set on permanent loan from the boss. So much easier than getting too many fingers in the way and blocking your view.
Cheers, Mike.
PS, that's better makes logical reading now....

[Steve Jones]

I thought you liked gluing your fingers together Mike?:smiling5::smiling3:

[scottie3158]

George.

Some nice work the etch is looking good.

[Guest]

Hello George,
Coming along ok, and getting to grips with the etch. A small tip, On small parts use two pair of tweezers, I
Cheers, Mike. use a pointed set and a flat eyebrow set on permanent loan from the boss. So much easier than getting too many fingers in the way and blocking your view.

Good idea Mike. I'll have a root through the missus' make-up kit...or something :smiling:
Some if the weeny little 'fasteners' are just too small so I'm going to omit most of them.

[Guest]

Slow progress given the festivities, however the storage bins are glued in place, primed & one cost of grey. The rifle racks I’m hoping are in roughly the right place with what appear to be support brackets glued underneath them.
I had to prime the small parts with a brush & use humbrol ‘flesh’ enamel as it’s the only proper paint I’ve got! I hope does the trick...god alone knows how you’d be able to spray these unless in situ. I feared that if I did that there’d be primer everywhere given the small parts & my lack of ability when spraying primer!

[ATTACH]323974[/ATTACH]

I’ve also ‘blinged up’ the chair springs with some dry brushed aluminium but doubt they’ll be any more visible once the top half is on .

[ATTACH]323975[/ATTACH]

[Guest]

You’re making a pretty good job of it, I’d say. Stuff like this is best to paint before closing up the model, when you think you can still reach everything. (By the way, can I ask you to rotate your photos 90° left before posting them? It would save many necks, I think ).

[Guest]

Thanks!
Yes, I know it’s annoying. I’m using the phone to take these photos & don’t think it has a rotate option :sad:
I’ll paint the rifle racks next & then muck around with the seats (eduard wants me to shorten the forward two to the same ‘length’ as the bins...not sure how well that’ll go!).
I’m assuming the seat covers would’ve been grey as well.
I’ve got some mini art & tamiya weaponry on the way so I should be able to load up the bins easily enough

[Guest]

Thanks!
Yes, I know it’s annoying. I’m using the phone to take these photos & don’t think it has a rotate option :sad:
I’ll paint the rifle racks next & then muck around with the seats (eduard wants me to shorten the forward two to the same ‘length’ as the bins...not sure how well that’ll go!).
I’m assuming the seat covers would’ve been grey as well.
I’ve got some mini art & tamiya weaponry on the way so I should be able to load up the bins easily enough

[edit] found the photo rotate button!! :smiling2: