Airborne's 1/35 Takom Bergepanzer 2A2

[Guest]

Mea Culpa - my life has taken a distinct downturn as a result of your revelation Mike (I was going to say 'I knew that but I wanted a challenge ...' -but I would be lying!) :anguished: I am now considering it as an exercise in manual and visual dexterity!
Steve

:tears-of-joy: it will be 'an exercise in manual and visual dexterity' when you are crawling all over the floor looking for them...
Run out a length of masking tape and fold it into a flat tube, you can then stick the end connectors to the tape, holes up, and then push the track onto them - guess how I found that idea.....
Mike with the red knees.....

[Airborne01]

:tears-of-joy: it will be 'an exercise in manual and visual dexterity' when you are crawling all over the floor looking for them...
Run out a length of masking tape and fold it into a flat tube, you can then stick the end connectors to the tape, holes up, and then push the track onto them - guess how I found that idea.....
Mike with the red knees.....

Yeah! Came to the same conclusion once advised of my 'oversight'!
Steve

[Airborne01]

Tracks assembled (surprisingly easy and restful!), initial paint work complete and tracks fitted, spade assembled and fitted and jib assembled. The jib needs the physical dexterity of a three-armed brain surgeon but eventually concedes! The cable diagram is unclear and the end fixing is unidentified, similarly the position of part K27 is unclear and the mounting bracket K36 is not identified at all. The instructions persist in suggesting the mounting of tiny, fragile parts! (Attention Takom - use your noddle and think this through!). Basic three-colour cam going down nicely. No more for awhile as I'm working at school for a while.
Steve

[Guest]

That looks the business, how are the knees?
I have found that recently the kit instructions omit certain parts or even give you a part and then it is not on the sprue they say it is....
Just recently when building the Doher I was looking for a part - went through the sprues A - Z and it was only when I realised the there were three sprue B for example, one large sprue and then two smaller sprues which I thought were more sprues. It was only when I checked the sprue layout on the instructions that all became clear....

[Guest]

The instructions persist in suggesting the mounting of tiny, fragile parts! (Attention Takom - use your noddle and think this through!).

I’ve said it before, but I’m convinced Takom’s instructions are drawn up by people who have never built a real kit in their lives, but have only done so on their computers. Where parts are never impossible to hold, always fit exactly as they should, don’t get in the way, and don’t break from handling. Luckily for me, I’ve not followed instructions from start to finish for probably 40 years, because when I did try to do that with Takom’s M29 Weasel, I found it to be just about impossible to build the model as you’re told to. By step 5 or 6, IIRC, I gave up and just built it my way instead.

The cable diagram is unclear

Looking at the instructions on Scalemates, I think the arrows point the wrong way I guess what they’re trying to tell you is to start at the end with the eye and then just wrap the cable around the pulleys and down the jib. I’d do it from the other side, I guess.

the position of part K27 is unclear

K27 is the thing that covers the support leg when it’s folded up, by the looks of it, but it’s very hard to really tell. Does this photo help?

[ATTACH]509147[/ATTACH]

[Guest]

I’ve said it before, but I’m convinced Takom’s instructions are drawn up by people who have never built a real kit in their lives, but have only done so on their computers. Where parts are never impossible to hold, always fit exactly as they should, don’t get in the way, and don’t break from handling. Luckily for me, I’ve not followed instructions from start to finish for probably 40 years, because when I did try to do that with Takom’s M29 Weasel, I found it to be just about impossible to build the model as you’re told to. By step 5 or 6, IIRC, I gave up and just built it my way instead.

I know Jakko, I sometimes dispair with the instructions....

[Airborne01]

The cabling is not too much of a problem really as only a cm or so is exposed unless you build with the jib raised and the block lowered - I'm building closed down as there's a place on a shelf earmarked for it! There's a surprising amount of detail hidden when the jib is lowered

[Airborne01]

The cabling is not too much of a problem really as only a cm or so is exposed unless you build with the jib raised and the block lowered - I'm building closed down as there's a place on a shelf earmarked for it! There's a suprising amount of detail hidden when the jib is lowered

[Airborne01]

That looks the business, how are the knees?
I have found that recently the kit instructions omit certain parts or even give you a part and then it is not on the sprue they say it is....
Just recently when building the Doher I was looking for a part - went through the sprues A - Z and it was only when I realised the there were three sprue B for example, one large sprue and then two smaller sprues which I thought were more sprues. It was only when I checked the sprue layout on the instructions that all became clear....

I've just returned from working away and have just re-read this! Sorry to disappoint but the Carpet Monster never even got a sniff! Out of all the components there were only two end-caps with one hole 'blind' and one track link that broke - well impressed I was!
Steve

[scottie3158]

Steve,
My apologies mate I have only just seen this. Just had a catch up and it's looking good.

[A_J_Rimmer]

Stunning build!

[vizenz]

Looking good Steve! Seems like a good kit. I have to admit I'm a little jealous. Such a beautiful injection moulded Bergepanzer 2 in 1/72 would be a dream.

[Guest]

There’s a resin one from Modell Trans, but I have no idea how good that is. It also seems fairly expensive to me, at €40.

[vizenz]

There’s a resin one from Modell Trans, but I have no idea how good that is. It also seems fairly expensive to me, at €40.

The original Model Trans models are really excellent (they now also sell 3D prints under license).
But since a lot of manufacturers are now coming onto the market again with 1/72 models - and don't shy away from exotic models, I hope that maybe someone will take pity and produce a Bergepanzer 2 (or a Bergepanzer 3, or an M47, or a Gepard, or . ...) :tears-of-joy:

[Airborne01]

Weeell, I think this is finished, fertig, sorted etc, etc! Couple of minor hitches but I think it will hide nicely on the book shelf! Not 100% satisfied but it'll do I suppose. No comparisons with Scottie's masterpiece please, Anyway, here it is...
Steve