Brian's 1/100 HMS Victory

[Bri62]

Going to have to find a closer paint match I just know I won't be happy to leave it as is

[Ian M]

Going to have to find a closer paint match I just know I won't be happy to leave it as is :sad:

What sizes are the cannon lengthxdia. And how many?
I wouldn't beat yourself up over the colour.
It was just varnish one time with red and blue embellishments, then black with white stripes, umpteen different yellow stripes and the pink ones! These have been mentioned in the ranges between cooked salmon colour, pale peach. Pink terracotta...

Basically you can't be wrong.

[Bri62]

What sizes are the cannon lengthxdia. And how many?

62 pcs 42x12lb 23mm 2x12lb 26mm 2x68lb 23mm 14x32lb 28mm that's with wooden carriages

[Bri62]

Ok started on the gun carriages this morning and omg took me hours



Twenty done this morning ........and also my deck arrived this morning

[Ian M]

We need guns. Lots of guns.

[Bri62]

Not a lot to see but I feel I have done a fair bit, must be getting quicker

[peterairfix]

Not a lot to see

I would say that's quite a lot to see good work so far

[wotan]

Bravo Brian

A nice little armory. Now when you have painted them you just need to rig each of them as you install them.

John

[Bri62]

Now when you have painted them you just need to rig each of them as you install them.

Yes John That's why I got the rigging upgrade as the rigging with the kit was poor quality, anyway ready for tomorrow


First coat for the ships boats

[NotesNut]

Loving that copper finish!

[Bri62]

Decided to change the colour as I'm really not happy with the outboard stripes these are the 3 colours I have to choose from.


I'm thinking 1 for outboard and 2 for masts and anything inboard or maybe 1 and 3 what do you guy's think?

[Ian M]

According to what I have found on the interweb, the Hull stripes are the pinkish colour and all else yellow...

[Bri62]

Not a lot to see.


60 cannons almost done only 240 wheels to paint then another 44 cannons to do :smiling3:

[Jim R]

Certainly a test of patience with those guns and their carriages. Looking good.

[Tim Marlow]

Interesting discussion about the colour here Brian. Read down and you will get the reasoning behind the colour choice.

https://modelshipworld.com/topic/17225-hms-victory-2017-re-fit-colours/

Personally I’m not overly convinced by their arguments though. Certain facets do not seem to have been taken into account. Not least that the yellow ochre used was a natural material so subject to variation, and that the final paint used was also hand mixed from dry powders and a binder, so again could vary. In particular, one of the components, white lead, is extremely liable to oxidation, turning black very quickly. Railway carriage roofs in the Victorian age were painted with this when new, and repainted every four or five years, yet it is almost impossible to find a picture of a carriage with a white roof. Oxidation could therefore alter the “yellow” shade markedly over its lifetime.
The colour they uncovered may not, therefore, match the colour it was when it was new. It is probably as close as they can get, but it will not be exact. The new paint shade will also be made with modern pigments and binders, so will look different to the original in almost any lighting situation.

Personally, I’d just pick a shade you are happy with and go with that. Don’t get to tied up over the excact shade.