Spray Booth

[Guest]

Any ideas of where to buy and what to buy. Obviouy it needs to be big enough to work on 1/35 scale and also I would like to vent it to outside. Seem to remember Laurie joining two side by side but cant find it in the threads now.


Cheers guys

[John]

I stock the AB500 spray booth, it should suit your needs

[Adrian "Marvel" Reynolds]

This is the one I use, you can if you wish also join two together for larger projects


http://www.ebay.co.uk/itm/Portable-airbrushing-spray-booth-extractor-E420-with-extraction-kit-/120891551071?pt=LH_DefaultDomain_3&hash=item1c25b2 ad5f


Adrian

[eddiesolo]

I have one that is similar to the one John is selling, mine has a built in LED light. Very simple to use and the hose can be attached through a wall or vented via an open window.


The figure and model shown are 1/24 scale and I managed.


Si

[ATTACH]111683.IPB[/ATTACH]

[ATTACH]111684.IPB[/ATTACH]

[ATTACH]111685.IPB[/ATTACH]

[ATTACH]111686.IPB[/ATTACH]

[John]

you can if you wish also join two together for larger projects

Same with the AB500

[Adrian "Marvel" Reynolds]

Same with the AB500

But £17 more With no hose

[John]

But £17 more With no hose

I do price match

[Guest]

I`ve got the Expo one John stocks with the hose , its fine size wise for 1/35 scale and superb if spraying acrylics or water based paints but struggles with solvent or enamel spraying in my opinion , its big bucks if you want a spray booth that can cope with spraying solvents , if you only spray acrylics its great you can even hoover the filter every now and then and it works like new again .

[Guest]

Any ideas of where to buy and what to buy. Obviouy it needs to be big enough to work on 1/35 scale and also I would like to vent it to outside. Seem to remember Laurie joining two side by side but cant find it in the threads now.
Cheers guys

Yes Alan the one John stocks is the one I have by 2. I keep all the cleaner, paints etc in the joied booths. keeps all the mess in one place.


Also you have two fans. Coupled up the two hose with a B & Q connector.


Makes a nice set up if you have the space.


Laurie

[Guest]

I have the one John sells (to my shame I bought it from elsewhere before I discovered this forum). I worked out that it was not big enough to house a 1/72 Lancaster bomber fully assembled (it is a big beast even at that scale) but no-one would need to paint the entire model in one go. With two side-by-side you would get a spacious booth.


I vent mine through the window, which works well (it comes with a fishtail end which can be wedged through a slightly open window. Although I use acrylics I have never had significant smells indoors. It has sufficient draft to suck fumes to the back and out to the hose.

[Guest]

I have the led one, I would opt for johns 2 booth though. Better than eBay customer support and really, I can see me needing to re-buy or modify mine in the future for bigger kits. It's perfect for 1/24 cars though...