Crikey Pete with all that going on you’ve done well to fit any build time in at all :surprised:
Nice work, looking forward to seeing some paint on it.
Geoff.
Nice work, looking forward to seeing some paint on it.
Geoff.
Desert Stuka
- Thread starter stillp
- Start date
Well, that'll do for today:
The rearmost part of the canopy looks a bit too wide, but the one at Duxford is about the same.
I'm not in a masking mood tonight, maybe tomorrow. Last time I built one of these I think I used pre-cut masks, but I was too mean to order any this time around.
Pete
The rearmost part of the canopy looks a bit too wide, but the one at Duxford is about the same.
I'm not in a masking mood tonight, maybe tomorrow. Last time I built one of these I think I used pre-cut masks, but I was too mean to order any this time around.
Pete
The masking mojo made a brief visit today, so I got the canopy masked - sorry, lost the photo - and splashed some Vallejo RLM65 on the underside:
I'll let that dry overnight and mask up tomorrow so I can start the topside with a coat of RLM79 Sandgelb.
Pete
I'll let that dry overnight and mask up tomorrow so I can start the topside with a coat of RLM79 Sandgelb.
Pete
Looks like a great finish Pete.
Wow, it sounds like your plate was more than full lately Pete. Hope everything is better now and you can drive on with this. Nice 65 belly coat Sir!!!
Prost
Allen
Prost
Allen
Aargh! Started masking the underside, had to reposition a piece of masking tape, and this happened:
I'm not having any success with paint recently, it must be something I'm doing wrong, but what? This was Vallejo Model Air, no primer. The only thing I can think of is that I'm laying the paint down too thick, but I thought I'd given it plenty of time between coats - about a half hour.
Pete
I'm not having any success with paint recently, it must be something I'm doing wrong, but what? This was Vallejo Model Air, no primer. The only thing I can think of is that I'm laying the paint down too thick, but I thought I'd given it plenty of time between coats - about a half hour.
Pete
Sorry to see that Pete. I'm no expert, but I usually let the 1st coat of Model Air dry for an hour or a bit more before shooting the second . I let that dry for a few hours before try to do anything to or with it. Could it have been the masking tape was a bit too sticky, like on my build???.......Should be an easy fix though...
Prost
Allen
Prost
Allen
Struggling with a really bad dose of hay fever, but I managed to get the underside masked and a coat of Sandgelb on the topside.
Pete
Pete
Slow progress is better than no progress!
Needs some RLM70 schwartzgrun, perhaps tomorrow.
Pete
Needs some RLM70 schwartzgrun, perhaps tomorrow.
Pete
The spinner is supposed to be yellow at the tip with RLM70 spots! I'm not sure how (if) I'll do that.
Pete
Pete
OK, re-masked and sprayed the RLM70.
Also sprayed the spinner;
Not sure how well that looks. I might just overpaint it in RLM70.
Also painted the prop, smaller bombs, and the big bomb:
Sorry, I lost the photo of the prop, but you can just see part of it peeking out from under the starboard wing in the first pic. Should have the masking off tomorrow so I can see how much paint crept under it!
Pete
Also sprayed the spinner;
Not sure how well that looks. I might just overpaint it in RLM70.
Also painted the prop, smaller bombs, and the big bomb:
Sorry, I lost the photo of the prop, but you can just see part of it peeking out from under the starboard wing in the first pic. Should have the masking off tomorrow so I can see how much paint crept under it!
Pete
Masking removed, there's quite a lot of touch-up needed:
Pete
Pete
Excellent... I do love a Stuka....
.. and this version is quite the attraction
Looking tops there Pete,
Lovely stuff!!
.. and this version is quite the attraction
Looking tops there Pete,
Lovely stuff!!
All looking very nice Pete :thumb2:
Geoff.
Geoff.
Underside decals are on:
Not the easiest decals ever as there's a lot of 'stuff' in the way!
Pete
Not the easiest decals ever as there's a lot of 'stuff' in the way!
Pete
G
That must have been fun, getting the decals over those … what are those thingies anyway?
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.