Search results
-
M
Rick's 1-87 Scale 3D Printed Fiat 666 Cargo Truck
After this thing was released from it's cage, I was able to get a closer look at it and it appears my work will be "cut out" for me as this little beauty has the Mumps or better described as the "nubs"!! every one of those little support fingers has left a nice round raised blob of resin at...- Mini Me
- Post #5
- Forum: Soft skins Under Construction
-
M
Rick's 1-87 Scale 3D Printed Fiat 666 Cargo Truck
Here it is out of the "cage" and into my kit box. I might add that it does not come with a windshield or side windows, no spare tire and no accessories, pioneer tools jack, fuel cans etc. Fortunately the good Mr. Merryweather has seen to that and all will be available on the finished model.- Mini Me
- Post #2
- Forum: Soft skins Under Construction
-
M
Rick's 1-87 Scale 3D Printed Fiat 666 Cargo Truck
After considerable pressure from this "crew" I'm going to blog this build. Background first......been wanting one of these for years so when I spotted it on Etsy(other sites are available) from a Polish 3D Printer, I said why not! It was very reasonably priced and shipping was cheap as well, so...- Mini Me
- Thread
- Replies: 47
- Forum: Soft skins Under Construction
-
M
What's on the Bench 2023
This is what's currently under consideration........not sure I want to do a build thread on it, my first time doing an all 3D printed model and am not sure about fit, finish etc. not to mention it did not come with anything in print to suggest how to go about getting it out of its resin cocoon...- Mini Me
- Post #352
- Forum: General Modelling chat
-
M
Rick's 1-87 Scale Jagdpanther Conversion Completed
I think I can safely say this is as done as it's going to get. A fun little conversion as well as a bit of a learning experience. Enjoy. ;)- Mini Me
- Thread
- Replies: 49
- Forum: Completed Armoured Vehicles
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Hi Guys, so I think this one is now done. Here's a "Teaser" shot with the venerable Vallejo bottle for a size comparison, as requested by the good Mr. Lovell. I'll post some more shots in the Armor completed section later on.- Mini Me
- Post #128
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Detail painting just about finished. Decals on and sealed. Black wash applied, when it's dry I'll do the final details and weathering and call this done. ;)- Mini Me
- Post #102
- Forum: Armoured Vehicles Under Constuction
-
M
Latest Acquisitions (2023)
Found this listed on Etsy for the ridiculous price in the lower left corner of the image so I ordered 2 of these Fiat 666 trucks in 1-87 scale. This company is in Poland and the quality of his printing in this scale is "baby butt" smooth with all the fine details in place. The best part is... -
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Finished up on the track assembly....outer roadwheels in place and started detail painting.....very intense and lotsa boo boos.- Mini Me
- Post #94
- Forum: Armoured Vehicles Under Constuction
-
M
Latest Acquisitions (2023)
Here are a few of the many Items received from our good Mr. Merryweather......they are "HOT" off the 3D printer and yes all are 1-87 scale. Included in the pic. a German 75.mm panther round, U.S. 2.36 in. Rocket launcher (Bazooka) minus the holographic sight however, ;) German Pioneer tools... -
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Current progress on paint repairs and adjustment of camo pattern. also some detail painting of the tracks.....tried something new, Tamiya panel line accent (brown) I washed the tracks with this stuff then when dry I went over them lightly with Steel lacquer (Testor's) and then did a little...- Mini Me
- Post #87
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
So here's what I was shooting for......I got close but tough to follow exactly. There is going to be plenty of touch up and "doctoring" before this is considered done, but it's closer than it was.- Mini Me
- Post #84
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
......and here it is. ;)- Mini Me
- Post #77
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Last update before paint........cable assembly is completed and located, outside road wheels are deflashed and also ready. The antenna stays off till after the paint and cammo are completed...been stabbed in the past too many times while handling.;)- Mini Me
- Post #66
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Here's the last "tidbit" I'm monkeying with before I can throw some paint at this.......the scale cables were way too small so I upgraded to six strands of twisted speaker wire and of course, the old standby, wine bottle foil for the swaged fitting to holds it all together.- Mini Me
- Post #60
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Here is todays progress.....only a couple items left and it will be time to paint this little beast:thumb2:- Mini Me
- Post #57
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Final update of the day......I got the skirt brackets installed and turned an antenna mast and dry fitted it. I also sanded the gun shield and aperture a little more to reduce the overly coarse appearance. Tomorrow I'll start on the stowage and tow cable along with the pioneer tools, jack etc.- Mini Me
- Post #55
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
Got a few outside chores to take care of so not much to post up......Got some Mr. Surfacer on the gunshield and the cast aperture. I think I might need to "knock" it down a bit more. In the second shot I have located the bars that the side skirt brackets will suspend from......still have to...- Mini Me
- Post #50
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
From a distance, it does not look like much has been done however, I managed to get all the hatches in place, all the handles for said hatches, all screens have been final installed, the MG ball was located and filled and sanded, you can't see them but the lower sponson plates are in and the...- Mini Me
- Post #47
- Forum: Armoured Vehicles Under Constuction
-
M
Rick's 1-87 Scale Trident Jagdpanther Conversion
I have now unleashed my secret weapon....that's right, the unbeatable resin track assembly with full track face detail! What will become of the 1-72nd scale competitors when they see that they have been outdetailed by the lowly 1-87 scale model, vying for a position in the world of acceptable...- Mini Me
- Post #44
- Forum: Armoured Vehicles Under Constuction
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.