Theme editor

Scale Model Shop

1/35 T34/76 by TAMIYA 35049 1942 production with metal tracks !

Thread owner
Right, this is where I am up to now.

The base used some dark Tamiya to replicate the soil of Eastern Ukraine. Darker in the riverbed, especially under where the bridge will be, and lastly a mixture of shades on the top of the banks .
2026.webp
2026_2.webp
Now the T34

2026_5.webpThe hull.
2026_4.webp
2026_3.webp
The Fruil tracks are just laid on, need to trim the ends down .

Tomorrow, that chipping fluid, and the winter wash!

John.
 
Thread owner
Looking very nice John.
Thanks Joe.
I've had reactions when I've mixed other paints with Tamiya, I think its cos they are not water based acrylics like most others.
The dio is looking really good mate..... (y)
Cheers, Peter. I agree; stick to one type!
 
Thread owner
Love that winter whitewash. Looks really good.
Thanks Jim .
Looks really good, How did you get the chipping effect? cheers
Hi Peter, after the top coat, I sprayed a thin coat of AK Heavy Chipping Fluid. Once dry, I sprayed a coat of TAMIYA XF WHITE. I
didn't leave it for too long, other wise it would have been nigh impossible to remove. Wet the surface with clean water, then start dabbing and, on vertical slopes, use a small, stiff brush to remove downward.
Today I sprayed the whole model with Tamiya X22 clear; I'll let it dry for a further 24 hrs, then apply an oil wash to pick out detail. Hope this helps.
Very convincing paint work John. Did you use chipping fluid or some form of magic?

:ROFLMAO: Yes, see my answer above to Peter.
 
Thanks Jim .
Hi Peter, after the top coat, I sprayed a thin coat of AK Heavy Chipping Fluid. Once dry, I sprayed a coat of TAMIYA XF WHITE. I
didn't leave it for too long, other wise it would have been nigh impossible to remove. Wet the surface with clean water, then start dabbing and, on vertical slopes, use a small, stiff brush to remove downward.
Today I sprayed the whole model with Tamiya X22 clear; I'll let it dry for a further 24 hrs, then apply an oil wash to pick out detail. Hope this helps.
:ROFLMAO: Yes, see my answer above to Peter.
Ah good, thanx for the explanation. I have some chipping fluid, can't remember which one, I bought it ages ago, but have been too scared to use it! You've inspired me to give it a go next time I do a suitable vehicle.... :) (y)
 
Back
Top