G
Thanks guys.
Paul, I have a bad habit of taking my pictures at 8MP and zooming right in to show up the tiniest mistakes. Nothing looks great at that magnification lol. I should stick to viewing in real size :smiling5:
Steve, in the instructions MIG recommend a dark brown wash and a green filter for that scheme. I'm wary of overdoing it since it's supposed to be a brand new vehicle, but if I make something up in those kinds of colours and tread lightly, I'm hoping to get away with it.
Paul, I have a bad habit of taking my pictures at 8MP and zooming right in to show up the tiniest mistakes. Nothing looks great at that magnification lol. I should stick to viewing in real size :smiling5:
Steve, in the instructions MIG recommend a dark brown wash and a green filter for that scheme. I'm wary of overdoing it since it's supposed to be a brand new vehicle, but if I make something up in those kinds of colours and tread lightly, I'm hoping to get away with it.
Hi Andy
Winch cable looks much better. Black camo outlines are fine - they'll tone down even with light weathering. Wood grain is nicely done. Nice to see figures included. Difficult to do but add a sense of scale.
You're doing a great job - onwards and upwards :thumb2:
Jim
Winch cable looks much better. Black camo outlines are fine - they'll tone down even with light weathering. Wood grain is nicely done. Nice to see figures included. Difficult to do but add a sense of scale.
You're doing a great job - onwards and upwards :thumb2:
Jim
G
Thanks guys. The way things are going this is going to be a long one. I keep thinking of more and more stuff to add or modify :smiling5: Not a bad thing though I guess.
Had another productive day out in my wooden wonderland.
First job was to get a filter on the camo. A few drops of colour in some matt medium and a splash of thinner made a nicely tinted clear. It turned out a little stronger than I was aiming for, probably one coat too many, but I like how it looks and it seems to blend everything together well.
After this picture it got a coat of gloss ready for decals tomorrow.
View attachment 361895
Then I've been thinking of all different ways to make the wheels on the wreck look as if they steered. In the end the simplest solution won. I cut most of the locating pegs from the hubs, leaving just enough to locate the wheels centrally, then cut the mounting faces on the backs of the wheels at an angle.
View attachment 361896
Which meant I could now do this. A bit wonky right now as they are only held on by blu tack, but at least it shows I'll be able to pose them properly when the time comes. I might end up doing the same on the trailer rig.
View attachment 361897
View attachment 361898
Then I set about the bracing on the underside of the scratch built load bed. Nobody will ever see it but if a jobs worth doing etc. It doesn't match exactly but it's a fair representation I think, and the mounting points had to be in different places as the chassis for this truck is set up to have a 5th wheel coupling on it. Needs some tickling with filler but pretty much done.
View attachment 361899
View attachment 361900
Thanks for sticking with me!
Had another productive day out in my wooden wonderland.
First job was to get a filter on the camo. A few drops of colour in some matt medium and a splash of thinner made a nicely tinted clear. It turned out a little stronger than I was aiming for, probably one coat too many, but I like how it looks and it seems to blend everything together well.
After this picture it got a coat of gloss ready for decals tomorrow.
View attachment 361895
Then I've been thinking of all different ways to make the wheels on the wreck look as if they steered. In the end the simplest solution won. I cut most of the locating pegs from the hubs, leaving just enough to locate the wheels centrally, then cut the mounting faces on the backs of the wheels at an angle.
View attachment 361896
Which meant I could now do this. A bit wonky right now as they are only held on by blu tack, but at least it shows I'll be able to pose them properly when the time comes. I might end up doing the same on the trailer rig.
View attachment 361897
View attachment 361898
Then I set about the bracing on the underside of the scratch built load bed. Nobody will ever see it but if a jobs worth doing etc. It doesn't match exactly but it's a fair representation I think, and the mounting points had to be in different places as the chassis for this truck is set up to have a 5th wheel coupling on it. Needs some tickling with filler but pretty much done.
View attachment 361899
View attachment 361900
Thanks for sticking with me!
Andy,
This is an impressive build going from strength to strength.
This is an impressive build going from strength to strength.
G
Thanks all.
Some day soon I'm going to have to make a start on the big scary base for it all. I'll put it off as long as possible!
Some day soon I'm going to have to make a start on the big scary base for it all. I'll put it off as long as possible!
G
Ideas, suggestions, inspiration or mockery sought please.
I started throwing a very rough layout together, just so I could see if what's been in my head would actually work.
Trailer unit is parked on a bend in a dirt road, which I plan to have sloping upwards towards its front end. Wrecked unit missed the bend and careered into a muddy stream below. Farmer is pointing out to one of the crew where to attach the tow cable. Obviously more figures and general stuff to add but these are the basics.
Seems to work as a rough composition but since the trailer unit is so long the whole scene is much bigger than I'd anticipated, so I'm worried there's too much empty space, especially at the front.
Am I on a road to disaster or does this look like it could go somewhere interesting?
Any advice appreciated, even if it's harsh! :smiling3:
I started throwing a very rough layout together, just so I could see if what's been in my head would actually work.
Trailer unit is parked on a bend in a dirt road, which I plan to have sloping upwards towards its front end. Wrecked unit missed the bend and careered into a muddy stream below. Farmer is pointing out to one of the crew where to attach the tow cable. Obviously more figures and general stuff to add but these are the basics.
Seems to work as a rough composition but since the trailer unit is so long the whole scene is much bigger than I'd anticipated, so I'm worried there's too much empty space, especially at the front.
Am I on a road to disaster or does this look like it could go somewhere interesting?
Any advice appreciated, even if it's harsh! :smiling3:
G
Thanks Andy.
Looking at it some more I may even snake the stream right the way across to break it up some more. I was going to keep it just to the corner where the truck had ditched since it's my first attempt at wet stuff, but I reckon it might help fill the space. Then some gardening on the near bank like you say.
Looking at it some more I may even snake the stream right the way across to break it up some more. I was going to keep it just to the corner where the truck had ditched since it's my first attempt at wet stuff, but I reckon it might help fill the space. Then some gardening on the near bank like you say.
Just a thought w/1st cuppa. You don't need to use all the space on the square base. Especially if this is your first big attempt. My most interesting dio was on a base of irregular cut plywood. You already have great built in interest & difficulty w/5 levels of gardening. I would cut the front edge in a random wavy line around the front of the ditched truck & eliminate a lot of the unused lowest level reducing gardening effort & focusing the eye to the models. PaulE
G
Thanks again Paul.
I've actually made a start on the real thing today (pictures later) but that front corner is still bothering me. I'll see how it looks as I progress but may end up following your advice and taking the jigsaw to it!
I've actually made a start on the real thing today (pictures later) but that front corner is still bothering me. I'll see how it looks as I progress but may end up following your advice and taking the jigsaw to it!
Andy, Paul and Andy's observations are spot on. Off with the corner. I don't think it's needed and could well detract the eye from the main focus - The vehicles.
Sometimes dios. get too complicated and make the viewer's peepers wander about the model too much and thus miss some detail or other. Try and strike a good balance.
It's your model and your imagination( Great fun 'innit!) You could always cut that bit off at a later stage if it still bugs you.
Sometimes dios. get too complicated and make the viewer's peepers wander about the model too much and thus miss some detail or other. Try and strike a good balance.
It's your model and your imagination( Great fun 'innit!) You could always cut that bit off at a later stage if it still bugs you.
G
Cheers Ron, 3 of you can't be wrong :smiling5:
I'm working with it for now but like you guys have said, it's just a filler and might detract from main event, so it may get the chop.
Time to bore you with lots more pictures. First off I didn't want a third MAZ with a winch so improvised a little load platform with wonky tie down holes in the space where it should fit. I had made something much more fancy, with an angle iron frame and vertical bars, but it ended up looking like a babies cot so it got trashed!
View attachment 362046
Then I started chopping some polystyrene. Much mess!
View attachment 362047
Glued the cliff face together with carpet adhesive, sprayed from a distance so the solvents didn't eat the foam. Clamped it up for a firm hold
View attachment 362048
View attachment 362049
Melted the river bed in with a hot air gun. Outside with a respirator, nasty stuff
View attachment 362050
Then a first coat of filler. Gyproc Easi-Fill, left over from some recent plasterboarding work. Lower portion needs more but it's better to build this stuff up in layers.
View attachment 362051
Once that was almost dry I put some texture into it with scrunched up tin foil and a coarse wire kitchen scourer (don't tell Zoe). Added the road surface with some OO gauge coal a mate gave me, and tile grout. Wet with PVA so looks a bit funky.
View attachment 362052
I'm working with it for now but like you guys have said, it's just a filler and might detract from main event, so it may get the chop.
Time to bore you with lots more pictures. First off I didn't want a third MAZ with a winch so improvised a little load platform with wonky tie down holes in the space where it should fit. I had made something much more fancy, with an angle iron frame and vertical bars, but it ended up looking like a babies cot so it got trashed!
View attachment 362046
Then I started chopping some polystyrene. Much mess!
View attachment 362047
Glued the cliff face together with carpet adhesive, sprayed from a distance so the solvents didn't eat the foam. Clamped it up for a firm hold
View attachment 362048
View attachment 362049
Melted the river bed in with a hot air gun. Outside with a respirator, nasty stuff
View attachment 362050
Then a first coat of filler. Gyproc Easi-Fill, left over from some recent plasterboarding work. Lower portion needs more but it's better to build this stuff up in layers.
View attachment 362051
Once that was almost dry I put some texture into it with scrunched up tin foil and a coarse wire kitchen scourer (don't tell Zoe). Added the road surface with some OO gauge coal a mate gave me, and tile grout. Wet with PVA so looks a bit funky.
View attachment 362052
Andy,
Some people are just born to model.
Some people are just born to model.
I'm with Paul here Scratchy!!! You definitely have the natural talent for this hobby. That last picture looks like what I got from the bakery this morning for breakfast. The white powder being sugar of course!!! Love where this is going Andy...……..
Prost
Allen
Prost
Allen
G
Thanks guys, can't beat compliments like that! :smiling4:
I guess it's time I came clean. I have done a bit of modelling before now, here's some of my previous work
I guess it's time I came clean. I have done a bit of modelling before now, here's some of my previous work
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.