System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

And In The Gates...... It's A Whippet

Status
Not open for further replies.
\ said:
Ah but the beauty of a lack of information is that no-one can say you're wrong Robert! ;)
I like Peter's maintenance idea. Perhaps with some careful scribing you could open up a panel? If it was one that had taken a shell hit, any damage would be explainable.


Here's a couple of pics I found showing some detail


View attachment 140903 View attachment 140904


I don't think that there's much beneath the exterior skin other than the tracks & wheels.
Click to expand...
"Ah but the beauty of a lack of information is that no-one can say you're wrong Robert! ;)" ................... Someone somewhere will :rolleyes:
 
Thread owner
Now now Lauries not here anymore and I don't want to upset any mods


So,back to the Panzer 4 and it's base time as I need to get that sorted ( prob get grief for not creating that right either!!


Oh well it's my model


Cheers


Robert
 
Thread owner
\ said:
Ah but the beauty of a lack of information is that no-one can say you're wrong Robert! ;)
I like Peter's maintenance idea. Perhaps with some careful scribing you could open up a panel? If it was one that had taken a shell hit, any damage would be explainable.


Here's a couple of pics I found showing some detail


View attachment 140903 View attachment 140904


I don't think that there's much beneath the exterior skin other than the tracks & wheels.
Click to expand...
I did a bit of study on all the ref pics I have including bovies example and I can't seem to find any panels that in effect would come off, so I'm assuming that the whole side panel would have to be removed to access the wheels/ running gear, unless the track could be removed? The only thing I found was an access panel by the drive sprocket obviously to oil/grease etc.


I knows the whippets design of side skirts took away the debris from the running gear, prob sim to the Matilda of the late 30s? So removing a section of panel seems difficult at present to fathom out ( even though I'm not going to get too much grief for trying )
 
Thread owner
\ said:
"Ah but the beauty of a lack of information is that no-one can say you're wrong Robert! ;)" ................... Someone somewhere will :rolleyes:
Click to expand...
True all but true
 
Thread owner
View attachment 241401

This a good photo of the running gear access panels I found but you know I think they built them like ships of the time ( blooming great huge pieces of steel and riveted the whole thing together ( no Tamiya cement them days eh
 

Attachments

  • image.jpeg
    image.jpeg
    3 KB · Views: 0
\ said:
View attachment 140905 This a good photo of the running gear access panels I found but you know I think they built them like ships of the time ( blooming great huge pieces of steel and riveted the whole thing together ( no Tamiya cement them days eh
Click to expand...
That's why they were called "Landships" and their names all prefixed with HMSL .........
 
Thread owner
Well I have been doing some more thinking on the whippet build, how to display at a later time. Well Peter mentioned a factory ( just out sort of look/ maintenance.


Unfortunately I'm scarce on factory black and white photos nor this happening but here's my idea


What if I built a concrete inspection pit with a few workmen underneath. I could do it with the tracks half off( laying the tracks on etc ( this way it would show the bottom rollers, top return rollers etc, the odd workman tightening a bolt or something and this way I could give the whippet a clean look but weathered look at the same time.


Because as Peter said quite rightly they were rivited sheets of steel like a ship ( land ships ) there are access panels on the side skirts that are bolted on so can be removed for maintenance.


I think my skills could do a dio of some description but I may have to do some more research first


Any and all help would be appreciated.
 
Now that sounds like a cracking idea! There are various workshop tool sets available in 1/35, as well as figures doing maintenance. Although they're WWII vintage, I'm sure that they'd still work in your dio Robert.
 
Thread owner
\ said:
That's an M3 Stuart though... View attachment 141098
And any British factory of the day would need lots of cups of tea in shot, a chap with a clipboard & a couple of fellas saying "I don't see any future in these new-fangled tanks Bert" View attachment 141099
Click to expand...
Thanks Patrick ( my thoughts exactly!!


I'm going to search other pics like Peter suggests and yes your right with the figs mainly being WW2 ( little adaptations ) and I'm sure tools don't change over time ( a spanner is for all a spanner but may need to look into scratch building generators I mean I'm sure they had same as we have now like in a garage or something ( was even thinking gantry but that's prob thinking too much out the box.


Like the idea of the guys Bert and the new fangled tanks!!!
 
Thread owner

Attachments

  • image.jpeg
    image.jpeg
    2.7 KB · Views: 0
  • image.jpeg
    image.jpeg
    2.5 KB · Views: 0
  • image.jpeg
    image.jpeg
    2.4 KB · Views: 0
  • image.jpeg
    image.jpeg
    2.7 KB · Views: 0
  • image.jpeg
    image.jpeg
    2.6 KB · Views: 0
iv just come across your build Robert , i got the same kit via Telford and Santa -don't ask and will watch your build with interest , i think Meng are a breath of fresh air and the detail is great .
 
great progress on this one so far,


watching with interest,I don,t think any of us real like doing wheels,but once done,its all strait forwards, ;)
 
Thread owner
Before I commit to painting the wheels ( primed them all first with Vallejo 74.602 Negro, I thought I'd make a start on the M1914 Hotchkiss MG x4 ( again primed them first and then painted 71.073 Metallic black ( light spray ) this could be done I'm sure with gunmetal but I am sticking with the instructions. The handle is painted by brush with 71.067 bright brass. I gave the gun a light steel ( Revell 36191 Steel ) dry brush but the black metallic is fine without the dry brush. Each gun is very well detailed and I doubt anyone would want to get aftermarket as these are super. They even come with a line of ammo each ( may need my magnifier to get those bullets painted but Meng with detail is fantastic


Pics below


View attachment 242447

View attachment 242448

View attachment 242449

View attachment 242450
 

Attachments

  • image.jpeg
    image.jpeg
    3.2 KB · Views: 0
  • image.jpeg
    image.jpeg
    3.4 KB · Views: 0
  • image.jpeg
    image.jpeg
    3.2 KB · Views: 0
  • image.jpeg
    image.jpeg
    2.5 KB · Views: 0
Status
Not open for further replies.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,183
Messages 695,538
Members 2,508
Latest member modelman
Back
Top