- Status
G
Thanks Gavin/Si, I have been Googling for info on the 2cm Flak Gun for several days now, and finally tonight have found a couple of good photos. I will see if I can modify the kit components and the MK1 upgrade to make these guns more realistic. Derek
View attachment 117933
View attachment 117934
View attachment 230956
View attachment 230957
View attachment 117933
View attachment 117934
View attachment 230956
View attachment 230957
G
Bit the bullet and bought Brass Barrels, so here is the old with the new. Still think the brass barrel is a bit short, but will just have to live with it. Just 9 more to do. Derek
View attachment 118286
View attachment 118287
View attachment 231309
View attachment 231310
View attachment 118286
View attachment 118287
View attachment 231309
View attachment 231310
I'm still here...looking good Derek.
I was pondering the working party figures set for my KG5...They look really nice. Are they as good as they look in the picture?
I was pondering the working party figures set for my KG5...They look really nice. Are they as good as they look in the picture?
they look so much better the original looks cartoon like
G
Hi Ron, Yes they do look good, must have driven the 3D CAD modeller nuts creating them. I think a really sharp new blade will be needed to remove the figures from the base, but that's a long way off. Derek\ said:
Sorry, I meant to enquire whether the figures are plastic or resin? If plastic, what is the consistency - soft or hard?
G
Ron, I believe they are Resin. Derek\ said:
G
Well, the instructions look straightforward....
!
Will also follow this as I have a ship on the slipway too. Having to have a break from it due to back aches - too much leaning over for the tiny parts!!
!Will also follow this as I have a ship on the slipway too. Having to have a break from it due to back aches - too much leaning over for the tiny parts!!
G
Finally got the 10 off 2cm Single Barrel Flak Guns finished.
View attachment 118642
Points to note: -
1) The only company I found who could do the 2cm barrels was Aber Models Poland, there may be others I don't know about.
2) Instructions say to drill 0.3mm holes for the Barrels, I found 0.4mm holes necessary.
3) The Gun Sight and Elevator Wheel PE in the Dragon kit I found to be undersized, so I used the Gold Medal ones from my spares box.
Moving onto the 2cm Quad Flak Guns. Derek
View attachment 231664
View attachment 118642
Points to note: -
1) The only company I found who could do the 2cm barrels was Aber Models Poland, there may be others I don't know about.
2) Instructions say to drill 0.3mm holes for the Barrels, I found 0.4mm holes necessary.
3) The Gun Sight and Elevator Wheel PE in the Dragon kit I found to be undersized, so I used the Gold Medal ones from my spares box.
Moving onto the 2cm Quad Flak Guns. Derek
View attachment 231664
They look superb Derek, nice work.
G
Wow, my God they must have been frustrating to make! Great work though mate
G
Nice work on the guns
G
Thanks for your interest lads, it's nice to have feed back especially now the viewing counter has been deleted.
I have laid the plastic components of the first of the 2cm quad flak guns onto the instructions (E1, E2, E7, E8 and E9), you can see the mouldings are nowhere as detailed as the CAD drawings, so I don't know why Dragon went into so much detail on the drawings.
View attachment 118964
The next photo shows the Plastic and PE components of one gun provided with the kit, along side one of the finished guns.
View attachment 118965
When gluing the PE to the plastic, I use the Gel CA, I never use it directly from the tube, I wipe a small amount onto a tissue in order to discard the old glue left in the nozzle tip, then place a small amount onto some scrap card and use a sharp wooden cocktail stick to 'butter' the glue onto where the PE is going
Will post more when I have finished all 5 off 2cm quad flak guns. Derek
View attachment 231986
View attachment 231987
I have laid the plastic components of the first of the 2cm quad flak guns onto the instructions (E1, E2, E7, E8 and E9), you can see the mouldings are nowhere as detailed as the CAD drawings, so I don't know why Dragon went into so much detail on the drawings.
View attachment 118964
The next photo shows the Plastic and PE components of one gun provided with the kit, along side one of the finished guns.
View attachment 118965
When gluing the PE to the plastic, I use the Gel CA, I never use it directly from the tube, I wipe a small amount onto a tissue in order to discard the old glue left in the nozzle tip, then place a small amount onto some scrap card and use a sharp wooden cocktail stick to 'butter' the glue onto where the PE is going
Will post more when I have finished all 5 off 2cm quad flak guns. Derek
View attachment 231986
View attachment 231987
Nice work Derek with the PE
That pe looks scarly small.
And i was going to get some for my bismarck and if its that small i will give it a miss i shall keep a watch for any tips
And i was going to get some for my bismarck and if its that small i will give it a miss i shall keep a watch for any tips
- Status
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.