A new product has been added to the Scale Model Shop range.
This latest release is now available to view, with full product details, specifications, and images listed below. It has been added as part of our ongoing catalogue updates and may be of interest to modellers following recent releases.
Matho Models Metal Fence Set B (1/35) 35059
Add finely detailed metal fencing to your 1/35 scene with Matho Models Metal Fence Set B. This accessory contains one photo-etch fret with two highly detailed fence sections, providing a precise way to incorporate metal fencing into a diorama.
Each fence section measures 3.2 cm wide and 3.6 cm high. The left and right edges feature bolt detailing and can be bent through 90 degrees for easy attachment to a support column. A large photo-etch bending tool is recommended for achieving clean, controlled bends.
These two fence sections are compatible with Matho Models 35060 Metal Fence Set B – Gate, sold separately. The fence design is also available as part of Matho Models 35087 Metal Fence B – Big Set with Gate, containing four fence sections and one two-part gate.
This set contains only photo-etch parts. Wall sections and support columns are not included.
For painting and weathering, leave the fence sections attached to the fret initially. Airbrush a few layers of acrylic primer, allowing at least 24 hours between coats. Continue with your usual acrylic or enamel colours and weathering products, then seal the finish with a few coats of varnish. Allow the varnish to dry for at least 24 hours before handling the parts further.
Once the finish has hardened, place the fret on a hard surface such as wood or glass and carefully cut out the fence sections using a fresh knife. Handle the painted parts gently to help prevent scratching. Any remaining fret residue can be removed with a micro file, although clean cuts can minimise the need for filing along straight edges.
After cutting and handling, touch up any areas where the brass colour has become visible. Use a round brush with a very fine tip and your main colour for these small corrections before attaching the fence sections to their support columns.
The post Matho Models Metal Fence Set B (1/35) 35059 appeared first on Scale Model Shop.
Click here to view the product...
This latest release is now available to view, with full product details, specifications, and images listed below. It has been added as part of our ongoing catalogue updates and may be of interest to modellers following recent releases.
Matho Models Metal Fence Set B (1/35) 35059
Matho Models 1/35 Metal Fence Set B
Add finely detailed metal fencing to your 1/35 scene with Matho Models Metal Fence Set B. This accessory contains one photo-etch fret with two highly detailed fence sections, providing a precise way to incorporate metal fencing into a diorama.
Each fence section measures 3.2 cm wide and 3.6 cm high. The left and right edges feature bolt detailing and can be bent through 90 degrees for easy attachment to a support column. A large photo-etch bending tool is recommended for achieving clean, controlled bends.
Compatible with Metal Fence Set B – Gate
These two fence sections are compatible with Matho Models 35060 Metal Fence Set B – Gate, sold separately. The fence design is also available as part of Matho Models 35087 Metal Fence B – Big Set with Gate, containing four fence sections and one two-part gate.
This set contains only photo-etch parts. Wall sections and support columns are not included.
Painting and Finishing
For painting and weathering, leave the fence sections attached to the fret initially. Airbrush a few layers of acrylic primer, allowing at least 24 hours between coats. Continue with your usual acrylic or enamel colours and weathering products, then seal the finish with a few coats of varnish. Allow the varnish to dry for at least 24 hours before handling the parts further.
Once the finish has hardened, place the fret on a hard surface such as wood or glass and carefully cut out the fence sections using a fresh knife. Handle the painted parts gently to help prevent scratching. Any remaining fret residue can be removed with a micro file, although clean cuts can minimise the need for filing along straight edges.
After cutting and handling, touch up any areas where the brass colour has become visible. Use a round brush with a very fine tip and your main colour for these small corrections before attaching the fence sections to their support columns.
The post Matho Models Metal Fence Set B (1/35) 35059 appeared first on Scale Model Shop.
Click here to view the product...