A new product has been added to the Scale Model Shop range.
This latest release is now available to view, with full product details, specifications, and images listed below. It has been added as part of our ongoing catalogue updates and may be of interest to modellers following recent releases.
Matho Models Warning Floor Markings (1/35) 35118
Matho Models Warning Floor Markings provides an A6-sized sheet of yellow and black water-slide decals for adding warning markings to scale modelling projects. Designed in 1/35 scale, the decals can also be used with other scales where their size suits the project.
The sheet provides one larger area of each marking type rather than restricting you to predetermined sizes. This allows the markings to be cut to match your specific requirements, whether you need a long, narrow strip or a larger warning-marked area. The flexible format also provides enough material for use across more than one project.
These water-slide decals feature separated film and ultra-thin decal material designed to adapt well to different surfaces. High-definition printing provides crisp results even in fine details, while accurate, colourfast colours and a semi-matte finish give the yellow and black markings a clean appearance.
Cut the required decal section to size with a sharp knife, then place it in water for approximately 5-10 seconds to loosen it from the carrier paper. Gently slide the decal into position using tweezers. Decal softener, such as Micro Set and Sol, can improve adhesion, particularly when working on non-flat surfaces.
Use tissue paper and apply light pressure over the positioned decal to remove excess water or decal softener and fix it into place. Once dry, an airbrushed coat of varnish can provide protection, while a semi-matte or matte varnish can reduce glare if required.
The warning markings are supplied without pre-weathering, allowing you to apply the level of weathering that best suits your design and blend the decals into the surrounding finish. Copyright markings are not present on the actual product.
The post Matho Models Warning Floor Markings (1/35) 35118 appeared first on Scale Model Shop.
Click here to view the product...
This latest release is now available to view, with full product details, specifications, and images listed below. It has been added as part of our ongoing catalogue updates and may be of interest to modellers following recent releases.
Matho Models Warning Floor Markings (1/35) 35118
Matho Models Warning Floor Markings
Matho Models Warning Floor Markings provides an A6-sized sheet of yellow and black water-slide decals for adding warning markings to scale modelling projects. Designed in 1/35 scale, the decals can also be used with other scales where their size suits the project.
The sheet provides one larger area of each marking type rather than restricting you to predetermined sizes. This allows the markings to be cut to match your specific requirements, whether you need a long, narrow strip or a larger warning-marked area. The flexible format also provides enough material for use across more than one project.
Flexible Warning Marking Decals
These water-slide decals feature separated film and ultra-thin decal material designed to adapt well to different surfaces. High-definition printing provides crisp results even in fine details, while accurate, colourfast colours and a semi-matte finish give the yellow and black markings a clean appearance.
- One A6-sized sheet of yellow and black warning markings
- Designed in 1/35 scale
- Can also be used with other scales
- Larger areas can be cut to the required size and shape
- Suitable for creating long narrow strips or larger marked areas
- Enough decal material for more than one project
- Separated film
- Ultra-thin decal material adapts well to different surfaces
- Semi-matte finish
- High-definition printing for crisp fine details
- Accurate, colourfast colours
Applying and Weathering the Markings
Cut the required decal section to size with a sharp knife, then place it in water for approximately 5-10 seconds to loosen it from the carrier paper. Gently slide the decal into position using tweezers. Decal softener, such as Micro Set and Sol, can improve adhesion, particularly when working on non-flat surfaces.
Use tissue paper and apply light pressure over the positioned decal to remove excess water or decal softener and fix it into place. Once dry, an airbrushed coat of varnish can provide protection, while a semi-matte or matte varnish can reduce glare if required.
The warning markings are supplied without pre-weathering, allowing you to apply the level of weathering that best suits your design and blend the decals into the surrounding finish. Copyright markings are not present on the actual product.
The post Matho Models Warning Floor Markings (1/35) 35118 appeared first on Scale Model Shop.
Click here to view the product...