discussion Off to the Russian Front

[Strenko J]

After watching many of you fine fellow modelers since joining a few months ago, I think it’s about time that I embark on a project here at scale models UK. I’ve taken some time off and as a new member I have really enjoyed it here. I’ve been busy training a new pup since we lost our eight-year-old Aussie / border collie mix a few months ago to diabetes and have focused on giving lots of love to my other dog and new pup, (another Aussie).....oh yeah the wife too...

Soooo off to the Russian front it is for me...I think that I am going to be using the kits show below, some aftermarket kits for added detail are not shown but have already been purchased and ready for the build. Some additional figures are also not shown.
I’ve already started on the divisional gun and have added some extra little detail.

View attachment 304709View attachment 304710View attachment 304711View attachment 304712View attachment 304709View attachment 304712View attachment 304710View attachment 304711View attachment 304713View attachment 304714View attachment 304715View attachment 304716View attachment 304717

 

[Guest]

Watching....:smiling:

 

[Guest]

Right Joe .

Settling in my front row seat , before the rest of the rabble rush in . :smiling4:
This sounds interesting, carry on :thumb2:
John .

 

[Jim R]

Hi Joe
Looks to be an interesting project. Off to a nice start. A lot of work so it will take some time. Never heard of Tusk figures. What are they like?
Jim

 

[Guest]

Good morning Comrad ! Looking forward to the progress ! Good luck with the build . Regards Danny

 

[Guest]

Great to see you started on another project Joe. I'm really looking forward to following this one.

 

[Allen Dewire]

Great stuff Joe! It looks like you're gonna be busy for a while and I see you've made a good start already. Like Jimbo, I have never heard of Tusk figures before either and am curious to their quality too. I'll be sitting next to Dzhon Race in the rabble section…….

Prost
Allen

 

[papa 695]

Hi Joe.
It looks like it's going to be a very interesting build, so I'll join the rest and watch this evolve.

 

[Steve Jones]

Joe

Great to see you back at the bench. I am a big fan of your work and I look forward to seeing this build come together. If JR starts to drool at the mouth I have the hankies ready. Good luck mate

Steve

 

[scottie3158]

Joe count me in, I'm glad to say I am part of the rabble.
Scottie

 

[Mickc1440]

I'll push in too, looks like being a good one.

 

[Strenko J]

Thank you all (rabble section and non rabble section) for sitting in to watch.... there’s plenty of room and yes this ones going to take awhile..so sit back, relax and enjoy your favorite soda pop along the way.

Okay so now you all have made me curious about the Tusk model figures and how they would go together. I’ve never had built one before as well. I found them on the internet at.....(shameless plug coming) .....AliExpress. Ordering and receiving them here in the states takes some additional time, but I thought that the figures had some very interesting poses and what looked like some very good detail. I constructed one of them this evening and found that the fit of arms and head to torso was fairly easy with what Appears to be a minimal filling and sanding at the seams. Cleanup was simple and seams from casting were removed a bit easier than some other manufacturers figures that I have built. Overall, I am pleased with the figure so far.

Need some help though....I don’t know what one of the resin pieces is supposed to be ??? It’s the middle piece between the canteen and what appears to be some food container?? Can someone please assist in this puzzling question. And is that a food bowl??
View attachment 304846View attachment 304848

 

[Strenko J]

I think I found my answer... should have done my homework before asking the question... yes that is a mess kit.. duhhh,, and the small piece is the top of the sack that is slung over his shoulder.. View attachment 304849

 

[monica]

real like the figures,Joe,should be a great paint for you,:smiling:

 

[Strenko J]

So a little update, primed the 76 mm however, I found two parts on the sprue that are not referenced in the construction details of the build and I’ve looked all over the Internet at different pictures and still cannot figure out what these two pieces are. Pieces are number 62 and 64, one looks like a trailer hitch, and the other looks like a fuel cap. However I know that’s not correct. Can anyone assist? I’ve even sent an email to ICM however I’ve not received a response to date.

 

[spanner570]

Sorry Joe, I couldn't wait for a taxi. The rabble had them all booked, so I used my bus pass to get here.

Looking forward to the build.

Ron

 

[Steve Jones]

The older version used to come with a limber so whether that was part of that??

View attachment 305673

 

[Guest]

Joe .
I've built a version of this sometime ago think 64 is a towing hitch, as for 62 ? As for the latter your guess is a good as mine. Would like to know the outcome.
Those figures look good.
John.
Proud member of the Rabble.:thumb2::upside::tongue-out3:

 

[Strenko J]

Steve and John,

many thanks for the input..not sure what I will do with the parts??? Probably keep looking around the internet)..not sure if this gun required a limber for transport as well?? any thoughts?

 

[Guest]

Joe .
Found this
View attachment 305976
A T20 towing , no limber in sight. Suppose they carried the ammo on the Kosomolet . This one was in use by the Germans and was towing a PAK 40

Parade showing a limber first.
Yet another .

So from this it seems that the limber was a required part of the gun I have some more photos where the Fins , like the Gremans appear to tow the gun on its own .
Keep the bits for now. :smiling4:

Just been into the cave and found this .View attachment 305981
I still have the .

View attachment 305982

View attachment 305983
So could have a look on the drawings to see if there is any mention of fitting to a gun.

Hope this helps.
John.

All photos for discussion only