Maybe check your references than
Either way, blue or green the application is the same, apply the tint on the inside for a nice clear finish on the outside when you demask.
I just added a sketch for your landing gear issue.
We're off. RAF Sea King HAR
- Thread starter Waspie
- Start date
Either way, blue or green the application is the same, apply the tint on the inside for a nice clear finish on the outside when you demask.
I just added a sketch for your landing gear issue.
Landing gear is a grand fix. For the next one, ASW SK, I'll remember that one. Obviously the Junglie wouldn't need it. Mentioning Junglies, the upper canopies are a light green, however, on all my pics of ASW Kings they are a lightly tinted blue.
Agggghhhhhhhhh, cock up today. Assembled the clear canopy today. Thought!!!! I had everything lined up and correct!! WRONG. I took a pic of the fitting and when I was checking I noticed a horrendous gap on the port side. So I guess tomorrow will be trying to remove the offending part and correcting the stupid error.
I wouldn't ride but I dry assembled it about three times!!!! Really annoyed with myself.
I wouldn't ride but I dry assembled it about three times!!!! Really annoyed with myself.
I've had that sort of trouble - parts that fit perfectly, until you put cement on them!
Pete
Pete
DONT get annoyed Doug as its not worth the stress as i had the same thing happen on my working seaking an then to make matters worst i treid to fit a window wiper on the cockpit as i fitted one great but the other one rolled onto the clear glass with c/a smearded over it an i was angry but its done no good gettin upset an in your case a little filler an no gap
chrisb
chrisb
Frustrating!
It has annoyed me Chris but not to the point of binning it!! As I said to Pete - 'frustrating'. Just ordered some filler, somehow I didn't think Pollyfilla or plaster would suffice!!!!
WELL Doug i use plastic wood filleron any gaps as it goes off hard soon an it easy to sand down
chrisb
chrisb
I think the reason I get annoyed and frustrated is I don't have the skills yet, (or materials), to fix any 'glitches' I make or encounter. Knowing the work rounds are half the battle I would guess! I ordered some Mr Surfacer from John, it seems to have worked for a few on here so I thought I'd give that a go! Nothing ventured nothing gained and again - all part of the learning experience!!!
YES Doug it is as ive been modeling now for 60 odd yrs but im still learning off all the guys on this forum as thats what make this forum so good
chrisb
chrisb
Must admit, being on here I have learned a lot, I just need to put what knowledge I'm gaining to practice. The guys on here have been invaluable. I would have just dived in, glued it together and daubed paint over it. Seeing what can be done has driven me to slow down, and take a bit more time to tidy up the parts and make for a better fit.
You still having time off away from Tiger!!! Have to tried to see if there are any decals that could be used for your crest? Also - 814 Naval Air Squadron was Nickname the 'flying tigers' maybe a suitable decal maybe found from any kit with their Sea Kings!! Just a thought.
YES Doug if you get a prob dont get annoyed just sit an calm down an ask the guys on here an as sure the sky is somtimes blue you will get help an an answer to them probs an no ive not been away from tiger was goin too but just had to fix the motor back in place in the hull just as well i made the hull strong an as regards about the eletrics was talkin to a boaty m8 today an he said dont take that 30 amp esc out of my norfolk as he said just wire up all 4 motors to the 30 amp one ive already got in tiger but the bueaty of this esc is that its got controll screws in it for power settin so i can turn down how much power goin through it an it will be proted by 30 amp fuse so if too much power then the fuse should blow till i get the right settin in the esc an im doin this tomorrow but got too be carefull with this eletronise esc as they are like gold dust as they not made anymore an john (wotan ) is a figure painter an very good too an he says he will attempt to paint me a badge for tigers bridge but its only a cetimeter tall so gonna be difficult
chrisb
Just a thought Chris. The Ship's crest is three dimensional - have you considered buying a metal pin badge and having it scaled down and copied by a friend with a 3D printer? You could use the pin to decorate the title plate your masterpiece deserves!
Steve
Steve
I've been scouring a few sites looking for decals of either HMS Tiger or the 814 the Flying Tigers 1/72 - no joy so far.
That's given me a few ideas of where to search. :thumb2: I like the idea of possibly getting it 3D modelled too!!!
Shame about the canopy gap. With patience you should be able to fill it. Protect the clear part with masking tape before you start.
The best thing for stress and frustration is a cup of tea, a few chocolate Hobnobs and a liberal sprinkling of bad language - works every time
The best thing for stress and frustration is a cup of tea, a few chocolate Hobnobs and a liberal sprinkling of bad language - works every time
WOW Guys the badge is only a centimeter high an at that small scale i doubt that the 3D would harly show plus i havnt got a freind who does 3D im afraid
but cheers to you both
chrisb
It's a MayDay on the Hobnobs but we are Bourbon capable!!! Tea is a given in times of high stress. (In times when stress isn't high actually).Shame about the canopy gap. With patience you should be able to fill it. Protect the clear part with masking tape before you start.
The best thing for stress and frustration is a cup of tea, a few chocolate Hobnobs and a liberal sprinkling of bad language - works every time
YES Jim spot on mate that it does for me to till one of you guys on this wonderfull foruom sorts me outShame about the canopy gap. With patience you should be able to fill it. Protect the clear part with masking tape before you start.
The best thing for stress and frustration is a cup of tea, a few chocolate Hobnobs and a liberal sprinkling of bad language - works every time
chrisb
an in times of high stress you get the clap as i do an not what you are thinkin but i mean just clap your hands togeather an for me its a high stress releiver lol
chrisb
My dogs have been my stress relief! I just walk away from whatever is getting to me and spend time with them - now the puppy. Down side with the pup is she's teething and the digits get it!! Which doesn't help with precision later!!!!
Ive had similar with an old Italeri Wessex kit.I.love Seakings and Wessex.Ive even got the tiny 1.144th Sweet Seaking kits.Boy oh boy are they tiny.I might post some images to show the motley crew here.
Hope you fix her.
Richard
Hope you fix her.
Richard
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.