discussion What a right carrier on ...

[Guest]

Good tip! What is the distance between the bottom of the grooves and the top of the plastic card spacer, BTW?

 

[Peter Gillson]

Good tip! What is the distance between the bottom of the grooves and the top of the plastic card spacer, BTW?

Jakko, the height of the plastic is 6mm. But that depends on the depth of the cuts. I test-fitted the carrier and built up the plastic until the carrier was supported.

Peter

 

[Guest]

That’s why I asked for the height from the bottom of the cuts I foresee myself building one of these Riich kits in the future, and knowing the total spacer height should help with that.

 

[Peter Gillson]

That’s why I asked for the height from the bottom of the cuts :smiling3: I foresee myself building one of these Riich kits in the future, and knowing the total spacer height should help with that.

Opps - mis-read your question, sorry. the height from the bottom of the groove is about 9mm.

Petrt

 

[Gern]

Don't take too long Peter. Quite a few of us are in our 70's

I shouldn't worry John. Looks like he popped into the future for his three 2lb kits he made in 2025/26 and bought them back with him! :smiling:

 

[Guest]

Opps - mis-read your question, sorry. the height from the bottom of the groove is about 9mm.

Thanks, now all I need to do is remember you posted that when I get round to buying and building one of these kits

 

[Guest]

Peter, poor Peter,
My analist is on the way round, how could you do this to yourself, we cured Bob of his Stug infestation, and now you pop up with this, think of the family, your friends you have lost through this affliction....
Peter, I remember your Mantis in the MM mag. And good to see you following through from the basic Carrier to the different versions with still plenty to build and show. Will be sitting next to JR...

 

[Steve-the-Duck]

Well, I win because I finished all of MINE

Apart from a Universal
And possibly an Armoured Observation Post
Damn