boatman's 1/72 HMS Tiger C20 build

[boatman]

So in for a penny an in for a pound an I cant back out now so I will have to carry on an remove the motor screws an that big nut so hopefully it will still continue to come apart

[boatman]

AN IT DOES an now I still cannot see the motor terminals so more diggin but gently does it

[boatman]

an still at it an I have to just (HOPE) that as this is an old servo that the motor terminals are not solerded direct to the PCB board if so then it will get that much harder but im up for a challenge an still gently liftin the servo guts out of its housein

[boatman]

an lookin inside it is a very tight fit on the wirein an such

[boatman]

AN its all out now to have a look at what I want to see with my fingers crossed

[boatman]

AN YES im happy as what I see is not what I dreaded but a simple solution as there are wires comin off the PBC board to the motor terminals so all I need to do is revese the power wires to the motor so yellow to the orange position an orange to the yellow an then the motor should go in revese of the way it went before so i'll get out the soldering iron an switch the wires tomorrow finger crossed all

[Neil Merryweather]

blimey Chris this is a dark art if ever I saw one!
incredible stuff

[Steven000]

Great work Chris! :thumb2:

[boatman]

blimey Chris this is a dark art if ever I saw one!
incredible stuff

HI Neil yes this is a bit into the unknown but hopefully i'll find out whather im right or wrong tomorrow but im pretty sure im on the right track cheers to you for popin in to have a look see ATB Chris

[boatman]

Great work Chris! :thumb2:

HI Steven it will be if it all works out but that's the trouble with eletrics it can pull a fast on on you when you least exspect it an again Steven thanks for havin a look at whats goin on
chris

[boatman]

here what ive got to sort out tomorrow

[Mini Me]

Looks like major surgery.......hope the patient lives. Rick H.

[boatman]

Looks like major surgery.......hope the patient lives. Rick H.

SO do I Rick just got to hope I don't get the shakes today while im operatein :cold-sweat:
but will know by tonight if its a sucsess or NOT :loudly-crying:
Chris

[Guest]

Morning Chris.
Your engineering skill re the hanger doors are brill, its been a nail biting few pages, I could feel the tension building as those photos of the servo appeared as it came apart.
Good luck for today.

[COLOR=rgb(226, 80, 65)]KEEP CALM
SOLDER ON.[/COLOR]

[boatman]

Morning Chris.
Your engineering skill re the hanger doors are brill, its been a nail biting few pages, I could feel the tension building as those photos of the servo appeared as it came apart.
Good luck for today.

[COLOR=rgb(226, 80, 65)]KEEP CALM
SOLDER ON.[/COLOR]

GOOD Morning to you as well John an yes today will be nerve rackin as lookin at the motor terminals I dint notice it before but as well as solderin the wires ive also got the bloomin capistater wires to solder as well an I must not heat them up to much or I could cause them to be damaged an plus this is all very small so I will need my head magnifer on to see if these wires an cap wires solder in the correct postions during the operation :cold-sweat: an many thanks for your kind comments on the hanger doors build
ATB STAY SAFE chris