G
Hi Peter, thank you for joining in. No building planned ..... yet , really wanted a wind swept track in marsh land.
John .
- Status
John .
G
Evening all .
I've broken these posting down as if you do a long one some of the replies get lost, unless the viewer clicks on " show more thingy "
Having to admit I spent most of this morning while some of brave chaps were out working asleep, ! Trouble is I search U tube at night for history and other modelling post. So many good ones out their, at times better than buying a book on the subject.
The KV is not my best attempt at modelling I feel , my fingers are too clumsy and the thin sections of this kit just break off, even though I was using the saw to remove bits from the sprue. The other annoying thing is the glue, you guys seem to be able to show such clean builds. Try as I do getting parts to glue with a small brush used , just doesn't work for me, so I end up putting rather a lot on. Ok most of the surface will get covered one way or the other so its not the end of the world , but It would be nice one day to do a clean build.
So moving on here are some photos, the first show the collection of figures that I seem to have amassed, using one or two here and there has left me with a lot of seperate ones. So following Richard I shall attempt to make up a couple of Germans emerging from their wet and cold lake/ river .
I have a set of Russian troops in full winter kit, but need a couple of guys in the tank, a driver peering out of his hatch and the commander up in the turett . So should be able to find something to cobble together.
Some nice Hornet heads, just hope they will look ok on some of of the torsos they don't always look to scale'
Next a group that look like they may be part of it.
Have a few hats to go through to see if they will be ok .
As only the upper halves will show I think these will do
Have a few hats to go through to see if they will be ok .
Right any purists please leave the room !
Had a little trouble getting the two halves together , I see tonight when I was fitting some towing eyes the front plate is not fully down, and the turret has a few glaring gaps that mice could get through.
Notice the filler in the center wheels, the cap short into the air and is some where in a pile of of stuff on a side chest of drawers. Oh the machine gun mount fell off !!! when I was discussing with the turret if it was going to fit or play games, it chose the later so the thing is now glued on ! the turret that is .
At this point I don't know if to attempt the Fruil tracks or keep them for another build, they will fit a SU Few more odd andsods pieces to fit tomorrow.
Thanks for following , comments as usual , but please be frank .
aJohn.
I've broken these posting down as if you do a long one some of the replies get lost, unless the viewer clicks on " show more thingy "
Having to admit I spent most of this morning while some of brave chaps were out working asleep, ! Trouble is I search U tube at night for history and other modelling post. So many good ones out their, at times better than buying a book on the subject.
The KV is not my best attempt at modelling I feel , my fingers are too clumsy and the thin sections of this kit just break off, even though I was using the saw to remove bits from the sprue. The other annoying thing is the glue, you guys seem to be able to show such clean builds. Try as I do getting parts to glue with a small brush used , just doesn't work for me, so I end up putting rather a lot on. Ok most of the surface will get covered one way or the other so its not the end of the world , but It would be nice one day to do a clean build.
So moving on here are some photos, the first show the collection of figures that I seem to have amassed, using one or two here and there has left me with a lot of seperate ones. So following Richard I shall attempt to make up a couple of Germans emerging from their wet and cold lake/ river .
I have a set of Russian troops in full winter kit, but need a couple of guys in the tank, a driver peering out of his hatch and the commander up in the turett . So should be able to find something to cobble together.
Some nice Hornet heads, just hope they will look ok on some of of the torsos they don't always look to scale'
Next a group that look like they may be part of it.
Have a few hats to go through to see if they will be ok .
As only the upper halves will show I think these will do
Have a few hats to go through to see if they will be ok .
Right any purists please leave the room !
Had a little trouble getting the two halves together , I see tonight when I was fitting some towing eyes the front plate is not fully down, and the turret has a few glaring gaps that mice could get through.
Notice the filler in the center wheels, the cap short into the air and is some where in a pile of of stuff on a side chest of drawers. Oh the machine gun mount fell off !!! when I was discussing with the turret if it was going to fit or play games, it chose the later so the thing is now glued on ! the turret that is .
At this point I don't know if to attempt the Fruil tracks or keep them for another build, they will fit a SU Few more odd and
Thanks for following , comments as usual , but please be frank .
aJohn.
John,
there is nothing wrong with that mate and don't call me Frank.
there is nothing wrong with that mate and don't call me Frank.
G
No I won't George :hugging-face:
Thank you .
John.
Thank you .
John.
Hi John
I also use a fibre glass pen to clean up glue marks. I am sure things aren't really bad. Looks fine on the photo.
Jim
I also use a fibre glass pen to clean up glue marks. I am sure things aren't really bad. Looks fine on the photo.
Jim
G
Thanks Jim ..... The front looks like someone threw the glue over it !
j
Hi Jim, I think I have one in my heap ! Will check tomorrow .Thank you .
John .
G
Looks all right to me too John.
G
Thanks Peter , very kind of you
Cheers Rick, I go for the10 ft rule :smiling: as for the tracks , they do look so good , making me feel guilty now even thinking not to use them :nerd::smiling3:.
John .
John, you're not building a Lunar Module that's dust free for crying out loud...it's a tank, the grubbier it is the better. I don't see anything wrong with your KV1 except for the missing hub where a well placed heap of mud will take care of it. I've not done a Fruil so if you make it look easy I'll get a set and go for it too. :smiling2: Go ahead use it.
BTW it looks ok and good for the next stage...who's Frank?
Cheers,
Richard
BTW it looks ok and good for the next stage...who's Frank?
Cheers,
Richard
G
Hi Richard, thanks , I know but everyone seems to build glue free models . Me finding Fruil easy is about as much chance of winning the Lottery ! As for Frank he was being so ! :smiling:
John :smiling3:
Morning Boss,
Im another that uses a fibre glass pencil thingy if I need to tidy up messy glue.
I dry fit a lot before even thinking about glue , but still make a mess:smiling5:
I really wouldn’t worry too much mate, there’s also fire :smiling4:
Im another that uses a fibre glass pencil thingy if I need to tidy up messy glue.
I dry fit a lot before even thinking about glue , but still make a mess:smiling5:
I really wouldn’t worry too much mate, there’s also fire :smiling4:
Never heard of a fibre glass pen so I will look that one up when I get home.
Listen to the wise words of our sage Richard. The reason they developed pigments was to cover up our mistakes. I know the mojo takes a kicking when it happens but once those friuls are on it will look the DB's.
As for Frank wasn't he the guy who found Sid and sold him some B Gas shares???
Listen to the wise words of our sage Richard. The reason they developed pigments was to cover up our mistakes. I know the mojo takes a kicking when it happens but once those friuls are on it will look the DB's.
As for Frank wasn't he the guy who found Sid and sold him some B Gas shares???
G
Morning Si ..... seeing it again this morning it looks a lot better, probably spent to long looking at it.
As to the suggestion of fire, who me. :fearful: mind you that had crossed my mind lol. Cheers mate.
John .
G
You are quite right Steve, I have found my pen , I remember Andy Smith had recommended it. Do you know where he is hiding ?
About to start them after a cup of tea, I was up this morning at 07.30 !!!!! .:upside:
JR
Fibre glass pens - be careful when using these - I use a surgical glove! The fine glass particles cause extreme irritation to my hands ( think of nettle rash ). It may be just my sensitivity, but be aware. They are VERY useful, though!
Dave
Dave
G
Thanks Dave. Good point.
G
Oh I'll send it again. :smiling:.
I haven't heard from Andy since he left MM. Don't really remember why, a great pity as I found him to be a great guy. Even went out of his way to meet us at the Station and took us home to meet his lovely wife, and Mort , then on to the hotel Torquay
John .
- Status
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.