Forgot, instructions in Japanese!! Thank god Andy sent me a mr color chart, in English:thumb2:
Latest Acquisitions (2020)
- Thread starter John
- Start date
Hi Richard,
not seen that Pz III with rail car before - do you get the rail track as well? Not mentioned on the box
The Stug B is another boxing of the one that a few of us are doing for Bobs Stug GB - will you be entering this one?
Good prices
Peter - hope you plan to post the Dalek build
More from John too
The AK will be a solid base for 2 lots of modulation, when I eventually get back into the garage!
Its 0 C here and frost on the cars, so not today.
The blades were reduced and discounted and points down to 72 p for a pack of 5!!!
After an 11p blade, its the one I use the most.
Timely delivered too
Thanks John
Regards
Steve H
The AK will be a solid base for 2 lots of modulation, when I eventually get back into the garage!
Its 0 C here and frost on the cars, so not today.
The blades were reduced and discounted and points down to 72 p for a pack of 5!!!
After an 11p blade, its the one I use the most.
Timely delivered too
Thanks John
Regards
Steve H
G
Dragon, even. I’ve got one that I built when it was new. Wasn’t a bad kit, but it suffered from “working” hinges and very thin grab rails etc. that deformed in the mould a little, and of course break easily.
Not had the Dragon incarnation but have had a previous Zvezda version. This one has new decals but everything else looks the same. Still has the rubbish hard vinyl tyres - I will hopefully be replacing them with castings of a scratched replacement I made. Have a brass RB barrel on the way for it
Picked this up today as I found the regulator on my AS186 a little clunky, this precision regulator gives me much finer adjustment.
and here it is fitted, I have left the reg and filter on the compressor and set to 30 PSI and no longer have to reach down to adjust on the fly.
Quality of life upgrade for that reason alone :nerd:
Warren
and here it is fitted, I have left the reg and filter on the compressor and set to 30 PSI and no longer have to reach down to adjust on the fly.
Quality of life upgrade for that reason alone :nerd:
Warren
Same here Steve, ref the horrible garage, no snow but freezing. I have about 6 kits waiting for paint etc
Postie brought these today 15 pins D sub conector sent for 2 of each 2 males an 2 female's an they sent 4 of each so im very happy
Great for trimming your nails:tongue-out3:boatman said:
G
I just checked mine, and its tyres are still good after about 25 years on a shelf, as are those of the BTR-80 standing next to it. OTOH, all four tyres on the BRDM-2 model (similar vintage) next to it have split, but on the BRDM-2 next to that, they’re fine … I’d say you might be making the right decision to replace them, just in case.
I also sent for this grinder an it looks a nifty little job one like andy bought
AN a nice helpin hands with built in lights 
like dave ward bought an its great
like dave ward bought an its great
Is that for left-handed solderers Chris?
Pete
Pete
GOT these from a C/B sale 
YES Pete that's what I noticed so I will see if I can fit it on the right side
Still stuff from C/B sale here is all different block an tackle for model ships
AN more C/B stuff Dremel assoryies
more 
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.