Same here Dave. Would be very interested to know how it performs.
Latest Acquisitions (2022)
- Thread starter John
- Start date
I'll give it a try on my guinea-pig ( much abused He -111 ), and do a brief product review
Dave
G
Use it and have to say was pleased, used both their own thinners and Ultimate. Could see no difference in either of the thinners.
Thanks both!!
How does it sand though John. To date I’ve found acrylics just tear if you need to do remedial work. Not an issue on my little blokes, but an essential quality if you work on things like aircraft or civilian cars…..
I`ve been after a better display case for a while now,narrowly missed out on a couple the last 6 months or so.
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
!!
Andy,(That`s not where it`s going BTW,the pic was taken in situ at the sellers)
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
!!Andy,(That`s not where it`s going BTW,the pic was taken in situ at the sellers)
I`ve been after a better display case for a while now,narrowly missed out on a couple the last 6 months or so.
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
Andy
My wife actually suggested the other week that I should get a display cabinet....no one was more shocked than me.....I might start having a look.
There are plenty about Andrew...... trouble is,they`re usually "Collection only",which,depending on how far you`re prepared to travel,does limit your choice somewhat.
It`s just a waiting game for the right one to turn up really,a case of "Slowly,Slowly catchey Monkey"!! :thumb2:
Tim - most primers look ok but the real test, as you say, is will it sand to a feathered edge without peeling back. Same with fillers.
Andy - display case is definitely a real bargain. Those figures look nice and I've used Coastal Kits bases a couple of times. They're very good as a quick fix. The main drawback is they are totally smooth.
Jim
Andy - display case is definitely a real bargain. Those figures look nice and I've used Coastal Kits bases a couple of times. They're very good as a quick fix. The main drawback is they are totally smooth.
Jim
Yes Jim,totally flat as you say,i`ll probably limit the additional stuff to just a few tufts of static grass here and there to break it up a bit.Certainly wouldn`t use them for my AFV dios,but to plonk a plane on they suit me fine :thumb2:.
The figures are very nice,looking forward to painting them up actually..... hopefully that detail will pop right out!
Best general filler I’ve found is Tamiya Jim, but that’s unobtanium in the UK. It is very similar to cellulose knife stopping that used to be used on car bodies. The AK cellulose is pretty good, so that tends to be my current “go to”. Acrylic fillers I limit to complex areas where the water clean up is useful because I find they don’t sand or adhere properly either. To be honest, if the flaw is a gap in a joint (happens on aircraft wings sometimes) I glue in slivers of plastic card or stretched sprue to both fill the gap and maintain the strength of the join. I do have Mr surfacer in a couple of grades, but that’s more like a filler primer than a filler per se.
COR you got a bargain there smithy well done it was meant to beI`ve been after a better display case for a while now,narrowly missed out on a couple the last 6 months or so.
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
Andy,(That`s not where it`s going BTW,the pic was taken in situ at the sellers)
chrisb
Indeed Chris,I had that feeling too
Yow!!!! what a STEAL...........I hope you don't have trouble sleeping nights, I'm afraid my conscience would bother me (just a little) for about 10 Seconds!!! :tongue-out3: Congratulations Mr. Smythe!!I`ve been after a better display case for a while now,narrowly missed out on a couple the last 6 months or so.
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
Andy,(That`s not where it`s going BTW,the pic was taken in situ at the sellers)
That was a fantastic bargain. All in with the top, base and downlights. BTW, are the glass supports adjustable in heights?I`ve been after a better display case for a while now,narrowly missed out on a couple the last 6 months or so.
However,my luck changed on Wednesday when my solitary bid of TEN QUID actually won one!! Even better...... it was "Collection only"..... Buckfastleigh...... which is just 10 miles down the A38!!:thumb2:
Just picked it up,it needs a bit of a clean but Hey,i can cope with that!!.........
Ere tis.......
...... YEP..... just TEN quid:dizzy:Feeling rather pleased with myself
Andy,(That`s not where it`s going BTW,the pic was taken in situ at the sellers)
Just a few of them bits that will come in useful .
Nice haul Mark,
Geoff
Geoff
Yep it sure was
The shelves aren't adjustable, just removable,as the little silver studs sit in pre drilled holes
Andy
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.