Theme editor

Scale Model Shop

1/72 PSC Sextons x3 - paint and decals

adt70hk

New member
Joined
Sep 4, 2019
Messages
10,558
Reaction score
561
Points
0
1/3
Thread owner
Hi all

So Junior have been working on this for while.

I actually helped this kit come into existence through a crowd funding project run by the Plastic Soldier Company and so I was really looking forward to the build.

Unfortunately, the kit had a number of issues - bad sink holes, bad mouldings and worst of all the left hand side didn't fit properly. The internal floor/hull had had to be shaved down a lot so that the would fit. Not at all like PSC and so it took a bit of shine of the build process.

As usual I've used photos as inspiration if not a direct copy and so I decided to open up one of the drivers hatches which as you will see below took a lot of work.

At the moment the gun and tracks are dry fitted to make painting easier - an 'exploded' one is below.

ACW as usual.

Andrew


---------------------------------------------------------

View attachment 362976

View attachment 362977

View attachment 362978

View attachment 362979

View attachment 362980

View attachment 362981

View attachment 362982

View attachment 362983

View attachment 362984

View attachment 362985
View attachment 362986

View attachment 362987

View attachment 362988

View attachment 362989

View attachment 362990

View attachment 362991

View attachment 362992

View attachment 362993

 

Attachments

  • 48398430646_dce3723b95_c.jpg
    48398430646_dce3723b95_c.jpg
    3.6 KB · Views: 0
  • 48932117906_40ffc9bfcf_c.jpg
    48932117906_40ffc9bfcf_c.jpg
    2 KB · Views: 0
  • 49024921658_5b5c0caa8e_c.jpg
    49024921658_5b5c0caa8e_c.jpg
    2.7 KB · Views: 0
  • 49025452871_c6ecc2c284_c.jpg
    49025452871_c6ecc2c284_c.jpg
    2.9 KB · Views: 0
  • 49024939823_a020940571_c.jpg
    49024939823_a020940571_c.jpg
    2.9 KB · Views: 0
  • 49025456696_217b726fda_c.jpg
    49025456696_217b726fda_c.jpg
    2.7 KB · Views: 0
  • 49024942998_19f4d8cf08_c.jpg
    49024942998_19f4d8cf08_c.jpg
    2.7 KB · Views: 0
  • 48912911122_7189d2d438_c.jpg
    48912911122_7189d2d438_c.jpg
    2.7 KB · Views: 0
  • 48888043042_6a733e9ffe_c.jpg
    48888043042_6a733e9ffe_c.jpg
    2.5 KB · Views: 0
  • 48887907322_b720891cfe_c.jpg
    48887907322_b720891cfe_c.jpg
    2.8 KB · Views: 0
  • 48398449476_a395f920ca_c.jpg
    48398449476_a395f920ca_c.jpg
    2.5 KB · Views: 0
  • 48398597017_7d1fa302de_c.jpg
    48398597017_7d1fa302de_c.jpg
    2.6 KB · Views: 0
  • 48398470856_b4fb5c8fec_c.jpg
    48398470856_b4fb5c8fec_c.jpg
    3.3 KB · Views: 0
  • 48398619057_a8bcc8416c_c.jpg
    48398619057_a8bcc8416c_c.jpg
    3.2 KB · Views: 0
  • 48398628222_d86e8f78cf_c.jpg
    48398628222_d86e8f78cf_c.jpg
    2.7 KB · Views: 0
  • 48398633652_138175c37e_c.jpg
    48398633652_138175c37e_c.jpg
    2.9 KB · Views: 0
  • 48887728196_13ef39743e_c.jpg
    48887728196_13ef39743e_c.jpg
    2.9 KB · Views: 0
  • 48887728816_719c241ea7_c.jpg
    48887728816_719c241ea7_c.jpg
    2.1 KB · Views: 0
Thread owner
Hi Steve

They've already been primed as part of last week's mass spray booth session. Hopefully they will see paint this weekend.

ATB

Andrew
 
Andrew,
Great work with the kit especially after the intro pointed out all the problems.
Mike.
 
Thread owner
Hi all

So yet another decal victim this week.

These as usual are marked up as Junior's 11th Armoured Division but I noticed some interesting issues with the markings when doing my research.

First up is that the markings on the photos from WW2 for this unit (and there are quite a few) show that the it always had the divisional marking (the Bull) and the 'arm of service' marking the '76' the wrong way round. The bull should be on the right and the '76' should be on the left. This unit seems to only have had them the other way round.

Secondly, and more intriguingly, the '76' should be a '74'.

The '74' was used for the 'senior' artillery regiment in a division (13th Regt Royal Horse in this case) which from what I can see only used self-propelled artillery in NWE as per all armoured division. The '76' was used by the 'junior' regiment, in this case 151st (Ayrshire Yeomanry) Field Regt, which only used towed 25 pounders in NWE. So either the division used the 74 and the 76 the wrong way round or the 51st (Ayrshire Yeomanry) also used Sextons in NWE at some point.

ACW as usual.

ATB

Andrew


View attachment 380846

View attachment 380847

View attachment 380848
 

Attachments

  • 49770591606_a55d092c06_b.jpg
    49770591606_a55d092c06_b.jpg
    2.8 KB · Views: 0
  • 49770917627_f3b5a5f0b1_b.jpg
    49770917627_f3b5a5f0b1_b.jpg
    2.8 KB · Views: 0
  • 49770592326_5ec8e6e301_b.jpg
    49770592326_5ec8e6e301_b.jpg
    2.8 KB · Views: 0
Excellent little collection there Andrew. I'll be getting their 15mm (1/100) version in due course and I hope the fit is better on that - my renovative skills are very limited so I don't want to have to sort problems out in such a small scale. I have to say I'm surprised you had build problems though, 'cos normally PSC kits go together with absolutely no problems.
 
Thread owner
Excellent little collection there Andrew. I'll be getting their 15mm (1/100) version in due course and I hope the fit is better on that - my renovative skills are very limited so I don't want to have to sort problems out in such a small scale. I have to say I'm surprised you had build problems though, 'cos normally PSC kits go together with absolutely no problems.
Dave

Thanks for the support! As you say most unlike PSC, perhaps they rushed things?

I hope yours go together well. Make sure you part some pics!

ATB

Andrew
 
Back
Top