discussion 1/72 Trumpeter T62 {ST}

[SimonT]

Hello folks - this is another current build that I am on with

I have been waiting a long time for a good T62 to appear and bought two of these as soon as it was released - unfortunately it is not as good as I was expecting

A bit of work is therefore required so here is a catch up to get to the current state......

View attachment 300330
Turret stippled with Squadron Green Stuff to get a bit of texture

View attachment 300331 View attachment 300333
Front wheel arches cut away and track guards thinned right down

View attachment 300332
Engine deck grilles cut out, louvres installed from micro strip and mesh covers added

View attachment 300334 View attachment 300337 View attachment 300335 View attachment 300336 View attachment 300338
One of the worst features of the kit is the shortcut they have taken with the turret ring where it hangs out over the track guards
This should be a sloped casting from the hull, widening out at hull top level
It has been moulded as a solid lump with vertical sides rather than the more usual method of providing the sloping pieces as add on parts
I removed the moulded lump and rebuilt things with Green Stuff and plastic card to get the correct sloped sides
View attachment 300339 View attachment 300340
Hull with turret after rebuilding the sides
View attachment 300341 View attachment 300342
Gun barrel replaced with a scratch built item made from tubing and filler

View attachment 300343 View attachment 300344 View attachment 300347
The kit fuel drums are not great and lack detail so I scrapped them after cutting off the drum racks
New drum made from tube, brass wire, pewter and filler and strapped down to the recovered rack
For a bit of variety I left off the left drum and made up empty retaining straps from copper sheet

View attachment 300346 View attachment 300345
Raised lip added around the turret ring from micro strip

View attachment 300348
Solid exhaust carefully opened out

View attachment 300349
Handrails added to turret from brass wire - nothing provided in the kit


Cont.......

 

[SimonT]

........Cont

View attachment 300350
I decided to open out the other grille at the rear left side - this would have been better to do earlier before the hull halves were joined

View attachment 300351View attachment 300354
Stowage box with added latches - first attempt was rubbish so they came off and were replaced

View attachment 300352
more handrails

View attachment 300353
mantlet cover sculpted from Duro Green Stuff

View attachment 300355
More handles

View attachment 300357View attachment 300358View attachment 300359View attachment 300360View attachment 300361
Fuel pipes added along with tank fixing brackets
View attachment 300362View attachment 300363View attachment 300364View attachment 300365View attachment 300366View attachment 300367
Details added to the front of the turret - light bracket thinned down and bolts added, lifting mechanism made from brass wire

View attachment 300368
Lenses added to the little marker lights next to the fuel tank

View attachment 300369
Hull front cleaned up and filled

Cont..........

 

[SimonT]

.......Cont

View attachment 300370
Splash board added to glacis plate

View attachment 300372
I mucked up the cupola fixing ring and had to make a new version

View attachment 300373 View attachment 300374 View attachment 300375 View attachment 300380
Extra details added to gun barrel and mantlet

View attachment 300377 View attachment 300379
Random pictures of the back end again

View attachment 300371 View attachment 300378
The one piece moulded track units could have been better. The track pins are rather vague so I added new ones from punched pewter sheet. Finished doing them today - takes a while

View attachment 300376 View attachment 300381
So this is where I am up to now after adding the track pins and front and rear hull tow hooks
Still needs front lights, rear marker lights, fuel tank handles, storage box latches and one or two other small details


SimonT

 

[SimonT]

More done on this one today

View attachment 300534
Handles added to fuel tanks and marker light added to rear hull side

View attachment 300535
Bolt heads added to final drive housings and rear marker light added to hull side just above track guard

View attachment 300533 View attachment 300536
Front mud guard torsion springs added
New conduits to lights from lead wire
Light cages added from brass wire

View attachment 300537
Un-ditching beam holder straps added to rear panel - bracket recovered by cutting off the kit 'log' and trimming down

I think this is now done and ready for paint but will give it the once over first to see if I have missed anything off


SimonT

 

[Neo]

Hello, Simon! Top class work! I am sorry I don't know if I may give a link to another forum. Here is my friend have scratched T-62. Perhaps it will be useful.
http://perfectmodel.su/forum/68-664-9

 

[Jim R]

Morning Simon
What you do is way beyond what most of us would dare tackle. A great model. I still wonder why you bother to buy kits at all :tongue-out3: Paint next :thumb2:
Jim

 

[papa 695]

Just caught up with this build Simon, and may I say what cracking work your doing, I don't think there isn't any part of the kit you haven't changed in any way ( and for the better ). This is one to keep on watching.

 

[SimonT]

Thanks Neo - your friends 1/35 T62 is not scratch built (lost something in translation? ) but it is super detailed. Very nice

Hi Jim - it should have been better as a kit. They could have made a really good job of it if they tried. I bought two so I will get to do this all over again at some point

Ian - thank you very much. You're correct, not much that hasn't needed some work

 

[Steve Jones]

MrT
I am glad you are continuing with this build. I expect you will be glad when you can finally get round to painting it
Steve

 

[Neo]

Unfortunately we don't have in Russian word like scratch, so I used it. Sorry for my mistake. I don't use traslaters because studied English for several years.

 

[SimonT]

Steve - very nearly at paint stage. I need to add some turret lifting hooks and then I think it can move to paint

Hi Neo - no worries. I just had a different idea of what to expect when you said scratch build

 

[Guest]

Looks like you had some pent up T-62 modelling energy to uncage. Well done!

 

[SimonT]

Hi Jim - I was annoyed at how bad the kit was and just sort of went for it :smiling:

 

[minitnkr]

Watching Simon's work over the years reminds me of a diamond cutter with a rough. He sees what could be, then makes it happen. PaulE

 

[SimonT]

Hi Paul, thanks for dropping in

Have added the turret hooks now.

Also realised that I had forgotten the screw down latches on the stowage boxes - have added them to one box but still need to do another so still not quite at paint yet

 

[Marcello]

when the game starts to get hard Mr T starts to play. Always a joy to follow your builds

 

[RM6239]

Simon
No hanging around on this one.
cheers
Ross

 

[Guest]

Simon .

Of course the first thing I notice is the time of postings. You now seem to be waking up later at the table or embarking on very early starts.
That said it certainly doesn't comprise your work.
John .

 

[rtfoe]

1/72 Trumpeter T62...number of kit parts...2...after Simon has had a go at it. :tears-of-joy: Wondered when the painting would start...respect.

Cheers,
Richard

 

[SimonT]

Marcello, Ross - thanks for dropping in

John - it's been getting worse. Waking up later and later - been getting to bed around 4am for a few days then it was 5am this morning!

I did however manage to get some more done on this before I passed out

I found a few more details that were missing

View attachment 301134
Each fuel tank needed an extra drain plug (?) adding to the end

View attachment 301135
Cupola got a brass wire handle to replace the solid plastic one and hinge pin ends added

View attachment 301136
Three lifting hooks added to the turret (just in front of the grab handle - same at the other side and one at the rear)
These were made from cut down and sanded Airwaves 1/35 etch equipment brackets

View attachment 301137
Front left stowage box lid fixings added

View attachment 301138
Hinge points added to the fender torsion bars and the fender lock bracket added made from an off cut of etch fret brass

View attachment 301139
Rear left stowage box lid fixings added

A sprinkling of rivet/bolt heads added and I think this is now complete and ready for some paint


SimonT