Theme editor

Scale Model Shop

21st century toys Macchi mc205 Veltro 1/32

Pilot looks superb. Excellent work on the wheel wells and wing lights. Can't believe they had embossed writing on the outside of the kit!
 
Pilot looks superb. Excellent work on the wheel wells and wing lights. Can't believe they had embossed writing on the outside of the kit!
Technic ally, it's a construction toy, rather than a kit per se. Bu-ut, having said that, for a 1/32 -205, it's pretty damn good. And comprehensive. And, when I got one, cheap!
 
Thread owner
This has now been primed , once its fully cured I can see if the airframe needs any more attention but I’m very happy with how the bays came out .Ive been sorting the very dodgy undercarriage , starting with the wheels . The kit ones are way too small in diameter but luckily in the spares box I had the rubber tyres and hubs from the Revell mitsubishi raiden I did a few years ago - (the kit had plastic ones too so i used them ) . The undercarriage legs had massively oversized yokes and pegs to fit into the u/c doors so they were suitably whittled down and the pegs and sockets cut off. The undercarriage doors should be in two pieces but to facilitate the working feature arent. The top section was cut off and this will be put on after . IMG_8904.webpIMG_8905.webpIMG_8906.webp
 
Thread owner
Well this is now in primer , nothing looks like it needs further attention so its colours next . Ive also been looking at the prop spinner . This is very pointed like the one on the Macchi mc202 Folgore , a kit 21st century did as well ( but like rocking horse s**t to find now ! ) but the Veltro has a much more rounded one . As a lot of the parts are shared with the Folgore , the Veltro kit was just a case of tooling a slightly different fuselage and leaving the wings etc the same but they obviously forgot about the different spinner .
Anyhoo , how to sort it ?The plastic looked quite thick at the end so I superglued a piece of dowel into the spinner as central as I could and then got the heavy equipment out! With the drill on a medium setting i held a coarse sanding stick against it till it had a better shape then finished off with a finer one . Its much better now , although when I took out the dowel the plastic at the tip was so thin you could see light throught it ! IMG_8916.webpIMG_8907.webpIMG_8908.webpIMG_8909.webpIMG_8910.webp
BEFORE
IMG_8907.webp
AFTER
IMG_8912.webp
 
Mid- and late-seria 202s had a lot of commonality with 205s, and some 205s were actual conversions from 202s (and not just in the factories), so it wouldn't be too unlikely for a spinner to cross over, especially if there are spares lying around on the field
I say this now after you've done the work!
 
Thread owner
Been thinking about the paint job . Its still going to get the smoke ring camo but ive decided to do the luftwaffe version as its not very often you see an italian aircraft in italian camo but with german markings . As a result of this change of scheme ive had to add the white fuselage band which will be masked off before the smoke rings get applied. While i had the white in the airbrush I did the spinner too . IMG_8929.webpIMG_8930.webpIMG_8931.webp
 
Looking better and better

My white bands on RA 'planes I usually do first, and usually use Insignia White, as 'true' (titanium) white didn't exist at the time (or so I've been lead to believe)
Got myself one of the new AK paint markers for when, if ever, I get on to doing smoke rings myself (if I don't 'cheat' and use the transfer sheets I've got!)

So. you're doing Italian 'planes in German markings, I'm set to do a Ju-88 in Italian markings. One which has three white bands around it! (Well, actually, it's one band with the overspray off the masking either side! That is going to be 'fun'...)
 
Back
Top