discussion Academy 1/350 HMS Warspite premium edition

[Guest]

Alan, Do you have a rigging plan for this model?

 

[mossiepilot]

A cracking start Alan, really nice work so far, keep it up mate.

Tony.

 

[Alan 45]

Nice one Alan, I like boats and prefer marine...wrecks mostly lol. This is a cracking start, have you varnished the deck prior to fitting or is it pre-done?Take your time and you will be fine mate.

Si

Cheers lads

Si the deck is pre done you just stick it on the one that comes with the kit it's easy but takes time as long as you do it in little bits adjusting as you go it's fine : )

 

[Alan 45]

Alan, Do you have a rigging plan for this model?

Not really graham I can't find any reference so I might go with the rigging set up for the 'R' class they were built around the same time so should be similar.

 

[Alan 45]

Update where I've got to now

I decided to paint the hull on the spur completly I didn't want to be doing weathering in case I got pant on it View attachment 69653

View attachment 69654

View attachment 69655

View attachment 69656

View attachment 69657

View attachment 69658


Up next is all the detail for the deck then it's some very tricky building of PE

View attachment 182679

View attachment 182680

View attachment 182681

View attachment 182682

View attachment 182683

View attachment 182684

 

[Alan 45]

I have just impressed myself

Here's my first difficult piece of PE , the 50ft swing boom View attachment 69715


This actually moves so I will have to secure it with a bit of blu-tac

View attachment 69716

View attachment 182741

View attachment 182742

 

[Alan 45]

My first difficult PE piece

View attachment 69867

View attachment 69868


Now I know it's not perfect but for a first attempt I'm reasonably pleased , now I'm not happy with the glue marks but it was difficult to aply a sufficient amount of CA to allow me to adjust the parts without it drying to quickly but seeing as there is very little glue on the outside of the piece I should be able to get away with it once its attached to the boat

View attachment 182892

View attachment 182893

 

[flyjoe180]

That looks to be a complicated piece of PE work Alan. Nicely done.

 

[Alan 45]

That looks to be a complicated piece of PE work Alan. Nicely done.

Thanks joe I'll put the full forward mast on tomorrow when I finish it , it is beyond my skill level but I'm not giving in and it is impressive but with practice I will get better

 

[Alan 45]

The forward mast completeView attachment 69940


I'm quite pleased with it although there are some bent pieces due to me having to hold prices in place to stick not perfect by any means but a good first try , what I'm finding difficult is the instructions for it the masts have no numbers so you have to guess which one is the correct one because the illustrations are not very clear but I shall persevere and if I make a mistake I shall put it down to my inexperience and move on

View attachment 69938

View attachment 69939

View attachment 182963

View attachment 182964

View attachment 182965

 

[Ian M]

That looks very good indeed!!! Well done!

Ian M

 

[Alan 45]

That looks very good indeed!!! Well done!Ian M

Cheers Ian if this turns out ok I'm going to get the pe for my other battleships , their practice I get the better I will get I hope

 

[Guest]

Perfect Alan!!

Well done, lovely work so far!!

Polux

 

[Alan 45]

Perfect Alan!!Well done, lovely work so far!!

Polux

Thank you polux mate but you give me too much prase but thank you again , well unfortunatly it no longer looks like that anymore ! A soon to be EX-employee has just trashed it so it's going to have to go in for a refit three days work ruined and I doubt it will the same now as the RDF arial has been claimed by the floor monster

 

[Guest]

Thank you polux mate but you give me too much prase but thank you again , well unfortunatly it no longer looks like that anymore ! A soon to be EX-employee has just trashed it so it's going to have to go in for a refit three days work ruined and I doubt it will the same now as the RDF arial has been claimed by the floor monster

Upsss... !

Don't know what to say Alan.... If I understand well the meaning.

PS: I usually reply a thread thinking about the effort and the illusion work of each member on his models. this one seems a very difficult one, so, done give up!! Is PERFECT to me!!

Is all lost?!

 

[Alan 45]

Upsss... !Don't know what to say Alan.... If I understand well the meaning.

PS: I usually reply a thread thinking about the effort and the illusion work of each member on his models. this one seems a very difficult one, so, done give up!! Is PERFECT to me!!

Is all lost?!

Thanks mate , I have found the RDF arial and attached it but it's bent and misshapen and the ladder at the back is now bent out of shape as we'll and I'm missing the 24 foot yard

Oh well these things are sent to test us

 

[Guest]

Looking good. The PE parts look tricky and I agree with you regarding the instructions for the PE bits.

 

[Alan 45]

Looking good. The PE parts look tricky and I agree with you regarding the instructions for the PE bits.

Thanks Graham , I'm doing a repair job on that piece at the moment and I've got it looking at least 90% as it did before

 

[Guest]

Thanks mate , I have found the RDF arial and attached it but it's bent and misshapen and the ladder at the back is now bent out of shape as we'll and I'm missing the 24 foot yard Oh well these things are sent to test us

Rarely I show my models (home)... The people just say: nice!

As a toy or a passenger bilge...

If they knew the nerves and frustrations that they can generate...

I'm a very selfish person, and want to continue seeing photos of this splendid model, so done give up friend

Best wishes

 

[Alan 45]

Rarely I show my models (home)... The people just say: nice!As a toy or a passenger bilge...

If they knew the nerves and frustrations that they can generate...

I'm a very selfish person, and want to continue seeing photos of this splendid model, so done give up friend

Best wishes

Cheers mate I won't give up on it just got to keep going and from now on keep everyone out of the ship yard from now on its out of bounds

Thanks again polux mate