discussion Andy's Tamiya 1/48 SdKfz 232

[Guest]

Great stuff Andy.

There is some footage of this actual vehicle negotiating a steep and narrow street in Athens on one of the World at War episodes. You can clearly see the 'Seydlitz' markings.

Thanks Peter, I'll have a look for that.

Scale inner diameter should be about 0.17 mm :smiling3: That fine, a reasonable trick is to push the end of a needle into the end of the barrel to make a small impression.

I'll flood the hole with paint to narrow it down a bit :smiling5:

0.35 was the smallest I had and gives a decent looking wall thickness, so I'm content with that.

Andy, just take your time.....

Just making the most of the days I have off. Back to the grindstone soon and still have my Whippet to finish so things will slow down considerably now :smiling3:

 

[Guest]

Hi Andy your have this finished by the time I get home :smiling5: great work, keep it up.
Pete.:thumb2:

 

[Graeme C.]

Nice work Andy, you've got on with the build rather quickly. The German 8 wheeled armoured cars are interesting beasts, a bit over complicated really.

 

[Guest]

Thanks Graeme, I now understand why I keep seeing the "shake n bake" reference towards modern Tamiya kits as it just fell together so easily.

 

[Jim R]

Hi Andy
You're making fine progress. As for the figure - use him :smiling2: Figures always add a sense of scale and bring a build to life. Don't fret if he is not painted to Peter Day's standard just go for it.
Jim

 

[Guest]

Cheers Jim.

I've got him painted actually. The call out was all black uniform so didn't think it would be too hard lol

I had no acrylic flesh colours so mixed a few shades from model air beige and light rust.

I've tried to break things up with a grey wash and some dry brushing and to be fair I'm quite pleased for my first real attempt. Nowhere near the standards of others, and he's a bit crossed eyed, but he'll do.

 

[Guest]

Hi Andy

Have a look at mikesresearch.com. He's done some research on this particular vehicle and has the film, which was apparently shot in Lamia.

 

[Guest]

Thanks Peter, I'll check it out when I get home.

 

[Steve Jones]

What a great kit and a wonderful build Andy. You certainly have taken to this modelling lark like a duck to water. Its an absolute joy watching your work

 

[Guest]

Thanks Steve, you'll make me blush with comments like that!

By the way, the cheque's in the post :smiling5:

 

[Guest]

Good for you Andy.
Nice photos and work to boot.
Headless figures are best for painting, but not from a viewing point:flushed:

 

[Guest]

Thanks John. Headless is a good idea, or maybe I'll drape some heavy camo netting over the area to disguise him a bit. :smiling5:

 

[Guest]

It's been a couple of weeks so I pulled this one back to the bench for some paint. I'm having another go with Vallejo and was pleasantly surprised at how well it sprayed after switching to the 0.4mm nozzle set.

I've had a go at modulating the colour but as always for me it seems too subtle. I'll get there with practice I'm sure :smiling3:

View attachment 357457

View attachment 357458

View attachment 357459

Really need to do something with the tyres though. The MrC tyre black is so similar to model air RLM66 that there's no contrast, even under my dodgy lighting.

View attachment 357460

 

[Steve Jones]

Modulation is noticeable so I would say it's worked well. I use Vallejo Model Colour Dark Rubber for my tyres which gives a nice look compared to Black. Nice work all round with the wet stuff

 

[Guest]

Thanks Steve, I'm yet to find a colour I like for tyres and usually end up mixing something, so will give that a try.

My only issue now with using Vallejo is waiting for it to dry before I can go any further. I'm used to doing everything really quickly, ask my poor, frustrated wife! :smiling5:

 

[Dave Ward]

For Tyres, I use Vallejo Model Color 862 Black Grey - I either airbrush it, if I have a lot of vinyl tyres, or hand paint for plastic tyres. It dries quickly - If I'm hand painting, the first one is usually touch dry by the time I do the last
Dave

 

[minitnkr]

A scale black for tread wear, some local soil color wash for cleats, a little pencil lead around rim, nuts/bolts, and dark rust on the brake drum behind the rim visible through the wheel openings should break up the gray. Just a thought during first cuppa. PaulE

 

[Guest]

Thanks for the suggestions. For previous models I've mixed MrC tyre black with semi-gloss black to get something I like, but a single pot would make life much easier.

 

[Tim Marlow]

I have another approach for tyre colour worth a trial....
I’ve used a drybrush and wash over dark grey for ages. Block in dark grey. Mix the dark grey with about ten percent flesh colour for a nice warm grey drybrush highlight....if you need more definition then wash with dilute black to redefine the texture...

 

[Steve Jones]

This may help a little Andy

Weathering Tyres