System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

Fun with trees

  • Thread starter Thread starter Guest
  • Start date Start date
Status
Not open for further replies.
G

Guest

Guest
Thread owner
Hi all Iam in the process of building the components for a diorama and I have to say that I have had a few hours of fun building my own trees. I have only built the frames so far and it is sooo much more enjoyable and satisfying building my own as opposed to trying to buy them at exorbitant costs, I have used the 1.2mm thick garden wire that you can by from Wickes or any garden centre; it comes in rolls of 100m and 200m enough for a few trees especially if you work in smaller scale.


scott
 
Any chance of some pictures of the whole build progression, or is it a final reveal? I'm sure the trees will be an excellent job.


You are right about the exorbitant costs of the ready made, false ones - and they don't look too clever anyway.


I must confess to taking the lazy route...I pluck mine ready made from mother nature.


Are you able to make Cosford this year?
 
Thread owner
There you go Ron this is where I am up to at the moment


scott
 
Thread owner
\ said:
Any chance of some pictures of the whole build progression, or is it a final reveal? I'm sure the trees will be an excellent job.
You are right about the exorbitant costs of the ready made, false ones - and they don't look too clever anyway.


I must confess to taking the lazy route...I pluck mine ready made from mother nature.


Are you able to make Cosford this year?
Click to expand...
I am aiming to be there.


scott
 
They look ruddy good mate! Are you going to clip the loops at the ends of the roots....


Also I have always wondered, do you just paint them or do you dip them first...I fancy a good at this my self so I am fishing for tips.. :)


Ian M
 
Thread owner
If you download the free magazines think it is Mig ones that John advised a couple of days ago there is a section some where of making your own trees.


Only gave it a cursory glance as i am not really a diorama expert but it looked very worth while. :oops:


Laurie
 
\ said:
There you go Ron this is where I am up to at the moment
scott
Click to expand...
Very nice...er, I hope you are producing these at home and not idling your time elsewhere waiting for customers !!
 
Thread owner
\ said:
They look ruddy good mate! Are you going to clip the loops at the ends of the roots....
Also I have always wondered, do you just paint them or do you dip them first...I fancy a good at this my self so I am fishing for tips.. :)


Ian M
Click to expand...
The loops have been clipped the next stage is covering them in powdered wall filler which is mixed with water then painted on.


scott
 
Must admit they do look good , though a bit labor intensive I'd imagine. Just a thought - I have found that if one went out to the garden and grabbed hold of the nastiest looking weed you can find and plucked it out by the root, clipped off the root and gave it a good rinse under the hose you would see the most intricate network of "limbs and branches" suitably trimmed to your purpose in mind with added bits of "foliage" I like HO scale foam "grass" and bits of dried moss from any wooded area to work nicely. Almost totally costless and Mom Nature did most of the work ! Cheers Jim:)
 
Thread owner
\ said:
Must admit they do look good , though a bit labor intensive I'd imagine. Just a thought - I have found that if one went out to the garden and grabbed hold of the nastiest looking weed you can find and plucked it out by the root, clipped off the root and gave it a good rinse under the hose you would see the most intricate network of "limbs and branches" suitably trimmed to your purpose in mind with added bits of "foliage" I like HO scale foam "grass" and bits of dried moss from any wooded area to work nicely. Almost totally costless and Mom Nature did most of the work ! Cheers Jim:)
Click to expand...
I have never done this before today and I did one in about 15-20 min.


Scott
 
\ said:
I have never done this before today and I did one in about 15-20 min.
Scott
Click to expand...
Really? Wow, they look like they might have taken much longer, though I may be biasly judging by my progressively arthritic fingers. good eye for shaping also. can't wait to see how you finish them ! maybe this old dog can learn some new tricks ! Cheers Jim :)
 
Thread owner
You should give it a try, it really isn't that difficult try it out on smaller trees first till you get the hang of it. The ones in the picture are 1.2mm garden wire, each length of wire was cut at 30in long and there were 18 lengths. When they are folded in half it gives you 36 lengths. This is the book I am using.


scottView attachment 100819


View attachment 213842
 
they do look good Scott,


the thing that gets me is i do wont to try that,one day,


but its the stating of them ,and how you are twisting the wire to get the branches


do you just start with a trunk that is from think to thin then add in the branches,


all very interesting and will look forward to seeing the progress, ;) ,
 
Thread owner
\ said:
they do look good Scott,
the thing that gets me is i do wont to try that,one day,


but its the stating of them ,and how you are twisting the wire to get the branches


do you just start with a trunk that is from think to thin then add in the branches,


all very interesting and will continue ard to seeing the progress, ;) ,
Click to expand...
Hi Monica just for you here is the run down, I used 18 strips of wire; each strip is 30 inches long. I folded all 18 strips in half this gives you 36 lengths now, hold the wires at the bend and twist all the strands together making a loop at the bottom to fit 3-4 fingers, this will for the base.


Twist all 36 strands togetheContinue art formingthe trunk; the length depends upon how many twists you make. Divide the base into 3 groups of 6 strands to make 3 loops; twist each loop and bend to right angles, younow have the base. If you want surface roots seperate out indiviual loops and twist then to form roots. Now we continue with making the trunk. continue up with this until you have the length of the trunk; seperate out 8 wires and twist them together till you get the branch length that you want. Now seperate 4 wires and twist them about 1to 1 and a half inches; do the same with the other 4. Now seperate 2 strands and do the same then the other strands 2 at a time,the first branch is complete. Continue with the trunk twist the remaning 28 wires for another 1 inch to 1 and a half inches, then seperate off another 8 wires and reapeat the same process you did to make the first branch. Again twist the remaining 20 wires for a further 1 and a half inches, then seperate out 8 more wires to create another branch. Continue with this until you have no wires left.


scott
 
thats a great help Scott,nice run through ,will have to have a go when i have some time,


your look great,


will be waiting to see more progress, ;)
 
Status
Not open for further replies.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,230
Messages 695,982
Members 2,519
Latest member Andrew
Back
Top