discussion Hasegawa 1/32 P47D Republic Thunderbolt

[Vaughan]

Well I'm very close to joining the fuselage. The cockpit walls are sprayed interior green where they will be visible and the area behind the pilot. There are two areas on the lower fuselage below the wings that will need some attention as there are sink marks on both halves some squadron green putty should fix it. In the mean time I've constructed the wheel bays and have sprayed them ZCY by mixing ZCG and a few drops of yellow this seem to have come out ok.

View attachment 59004

View attachment 59005

View attachment 59006

View attachment 59007

View attachment 59008

View attachment 59009

View attachment 59010

View attachment 172030

View attachment 172031

View attachment 172032

View attachment 172033

View attachment 172034

View attachment 172035

View attachment 172036

 

[Adrian "Marvel" Reynolds]

Very nice, look real good

Adrian

 

[michaelm]

Crackin' build, great job with the cowling. M

 

[Guest]

A fantastic bit of work there Vaughan. Keep up the good work,

Andy

 

[flyjoe180]

Great progress Vaughan, that cowl looks fantastic.

 

[Guest]

Coming along nicely Vaughan,looking forward to seeing the fuse halves joined up! Keep up the great work,cheers Trey

 

[Vaughan]

Hi all

At last the fuselage is finally together a small amount of filing was required but I made sure that the seam from the front of the cockpit to the the engine cowling was left as it present on the real P47D(see Image). Wheel wells are now attached to the lower wings and also the optional panels have been added for the Maj Glenn T.Eagleston version the landing light being at the far right. I will also need to remove the two rails from the lower wing surfaces, and drill two holes, to allow the hangers for the drop tanks or bombs to be fitted.

View attachment 59242

View attachment 59243

View attachment 59244

View attachment 59245

View attachment 59246

View attachment 59247

View attachment 59248

View attachment 172268

View attachment 172269

View attachment 172270

View attachment 172271

View attachment 172272

View attachment 172273

View attachment 172274

 

[stona]

Good progress Vaughan. It's recognisably a P-47 now and that ZCY looks spot on to me. You can just about see my version on the inner gear door here.

Cheers

Steve

 

[Guest]

Looks fantastic so far. I remember my Thunderbolt. The first ever Scale build i ever completed.

View attachment 57287View attachment 57288View attachment 57289View attachment 57290View attachment 57291View attachment 57292View attachment 57293View attachment 57294View attachment 57295

View attachment 57296

I enjoyed every minute of the build all 16 months of it i think lol. Still never flown it yet. Keep up the good work

Andy

View attachment 59250

View attachment 59251

View attachment 59252

View attachment 59253

View attachment 59254

View attachment 59255

View attachment 59256

View attachment 59257

View attachment 59258

View attachment 59259

View attachment 172276

View attachment 172277

View attachment 172278

View attachment 172279

View attachment 172280

View attachment 172281

View attachment 172282

View attachment 172283

View attachment 172284

View attachment 172285

 

[Vaughan]

Andy first time that I've seen your build it looks fantastic some great detail you need to get that bird in the air.

 

[Guest]

very cool like the tip about the wire nice build

Sent from my GT-S5670 using Tapatalk 2

 

[Guest]

Andy first time that I've seen your build it looks fantastic some great detail you need to get that bird in the air.

Thanks Vaughan. You can find the whole build process on here in the Under Construction section. It was some time ago though.

Keep up the good work.

Andy

 

[Vaughan]

Thanks guys.

Well the wings are on, a smear of putty was required and I have also added the drop tank/bomb pylons. Yesterday afternoon I made a start on the wheel bay doors and the under carriage legs opting to spray them olive drab as I believe this was the case on later models.

View attachment 59396

View attachment 59397

View attachment 59398

View attachment 59399

View attachment 59400

View attachment 59401

View attachment 59402

View attachment 59403

View attachment 172422

View attachment 172423

View attachment 172424

View attachment 172425

View attachment 172426

View attachment 172427

View attachment 172428

View attachment 172429

 

[Vaughan]

Hi Guys

I need a bit of help maybe Steve(stona) will know, as I have just put the flaps together and have chosen the down position. I'm doing an overall NMF and areas of the flaps are exposed what colour should they be ZCY or NMF? I did manage to find these reference photos one from Duxford and the other two from the squadron walk-arounds but still unsure what they should be.

View attachment 59656

View attachment 59657

View attachment 59658

View attachment 59659

View attachment 59660

View attachment 59661

View attachment 172682

View attachment 172683

View attachment 172684

View attachment 172685

View attachment 172686

View attachment 172687

 

[flyjoe180]

Hi Vaughan. NMF is correct:

View attachment 57798View attachment 57799View attachment 57800

View attachment 59701

View attachment 59702

View attachment 59703

View attachment 172727

View attachment 172728

View attachment 172729

 

[Vaughan]

Joe thanks for the images that pretty much answers my question. Thanks again

 

[Vaughan]

Hi all

Very little progress over the last 5 days although I've been working on the main under cart. Wheels are together and sprayed with a a very dark grey hubs in silver and then weathered. I've also added some flats using a domestic iron, to protect the iron I placed a sheet of tin foil over the hot plate. This worked well considering this is the first time I've used this method. A small amount of tidying up was required but all looks good. All the main components are now attached and I'm pleased with the result. Just the break pipes to add and some final weathering and they're complete.

View attachment 59982

View attachment 59983

View attachment 59984

View attachment 59985

View attachment 173008

View attachment 173009

View attachment 173010

View attachment 173011

 

[Guest]

Cruising right along Vaughan and its looking great,love the way the landing gear came out ,nice job!

 

[stona]

Hi Vaughan, according to Nigel (Julian) who really does know,that area would be natural metal on aircraft with a nmf. On aircraft delivered in nmf and painted in theatre it varied simply depending whether the flaps were up or down at the time of painting. In aircraft delivered in Olive Drab that area was painted OD at the point of production.

Cheers

Steve

 

[Vaughan]

Thanks Trey and Steve for the info.

I've added the brake hoses and pipes using painted lead wire with help from reference photos I took at Duxford last year. Then I added some final weathering. The flaps were provided with decals for the no step areas but I decided to spray them red because the decals were too small to cover the correct area. Fortunately there are 4 no step decals provided so will use them.

View attachment 60020

View attachment 60021

View attachment 60022

View attachment 60023

View attachment 60024

View attachment 173046

View attachment 173047

View attachment 173048

View attachment 173049

View attachment 173050