Spraying pva glue
- Thread starter AlanG
- Start date
- Status
G
wouldn't Tamiya thinner clean it out .it is strong . I know its not a cleaning product put its only pva glue cheers Steven
G
You can get cans of spray glue from Poundshops. I just mix PVA glue with water & apply it with a brush.
I wouldn't try it through an airbrush, I'd be too worried about clogging it up!
Cheers
Patrick
I wouldn't try it through an airbrush, I'd be too worried about clogging it up!
Cheers
Patrick
If you want to risk an airbrush at it you MIGHT get away with cleaning it out with loads of water then a good reamer like rinse.
However, if you have an art shop nearby, you have a couple of better options. Either buy a spray tin of glue, mounting glue type of thing, or ask if they have a mouth sprayer for fixatives. Its two tubes fixed at a 90deg angle a thin one that goes in the liquid and a thicker one you blow through. You could probably make one out of a couple of bits of brass tube, try with 3mm for the thin on and 5mm for the blow tube.
It works the same as a single action airbrush.
Ian M
However, if you have an art shop nearby, you have a couple of better options. Either buy a spray tin of glue, mounting glue type of thing, or ask if they have a mouth sprayer for fixatives. Its two tubes fixed at a 90deg angle a thin one that goes in the liquid and a thicker one you blow through. You could probably make one out of a couple of bits of brass tube, try with 3mm for the thin on and 5mm for the blow tube.
It works the same as a single action airbrush.
Ian M
G
you could try one of the cheapo pound type shops and pick up a plant mister/sprayer, i got one about three weeks ago for doing the houseplants and have already nicked it for modelling room.i use lots of pva in my work and would not like to risk it going off in an airbrush,it would rinse out easily with water but how many times have we all forgotten to clean out the airbrush straight away or been called away to do something.
G
Like Patrick, I use a brush for trees and scenery but to seal a surface i use an old kitchen cleaner/disinfectant squirty bottle (some even have twistable nossels for spray and stream which is handy)
G
Allyne. If you do not have any luck try Cow Gum. Why the name I have no idea.
We was used it in architecture for constructing models & mounting drawings & was perfect. A good adhesive while still soft & you can reposition. If it gets on anything by accident it will roll off without leaving any marks. Now that strikes a cord must try it as a masking agent !
Laurie
PS Came then in a tube but I bet they also do it as a spray now.
We was used it in architecture for constructing models & mounting drawings & was perfect. A good adhesive while still soft & you can reposition. If it gets on anything by accident it will roll off without leaving any marks. Now that strikes a cord must try it as a masking agent !
Laurie
PS Came then in a tube but I bet they also do it as a spray now.
G
In the architectural models Allyne, we made, we used twigs from trees & shrubs. For foliage we used a variety of different sponges & cotton wool. They looked after a bit of artistic work very real.
God that seems years ago now.
Laurie
God that seems years ago now.
Laurie
G
Al, get into the garden or woodland, find some ivy & pull it up ( wear gloves! )
Trim the root system, wash the excess dirt off & pop it in the microwave for a minute to kill any bugs.
Then brush with a PVA & water mix & sprinkle with dried herb leaves. I use mixed herbs or oregano. This makes excellent foliage & would work for trees too.
I'll be making one this week so I'll post pics if you like.
Cheers
Patrick
Trim the root system, wash the excess dirt off & pop it in the microwave for a minute to kill any bugs.
Then brush with a PVA & water mix & sprinkle with dried herb leaves. I use mixed herbs or oregano. This makes excellent foliage & would work for trees too.
I'll be making one this week so I'll post pics if you like.
Cheers
Patrick
Another good source for trees for diorama's is the hedges around the garden. Box hedges are best.... Great fir trees can be made from the dead flowers from a butterfly bush. (budlia?) bash the dead brown flowers off, roll them around in some thinned PVA then in a tray of that faux grass stuff.
Ian M
Ian M
- Status
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.