discussion Wendall's 1/48 Raspberry Ripple Tornado

[Wendall]

I've been wondering what to do with this kit for a while. I picked it up at the Yeovilton model show last year but I've never liked the kit decals. They're very nicely done, nicely printed, readable to the smallest detail and in perfect register. The scheme just doesn't do it for me.


Anyway, during a tidy up of the Man Cave yesterday I stumbled across a couple of decal sheets I'd forgot about and I formulated a cunning plan. I know I'm a bit late of the mark but I should get it finished by new years eve


View attachment 116903

View attachment 116904

View attachment 116905

View attachment 116906

View attachment 116907

View attachment 116908

View attachment 116909

View attachment 116910



There's a lot of plastic in the box. It looks a lot more detailed than the Airfix Tonka I had a run in with once!


View attachment 116911



Decal sheet. There's the markings for a Gulf War airframe as well! Maybe a dirty pink bird in the future???


View attachment 116912



Image courtesy of these guys http://www.bahg.org.uk/tornado.htm


I have some spare drop tanks and 1000lb bombs so I'll load it out a bit like this.


Wish me luck


Jason

View attachment 229926

View attachment 229927

View attachment 229928

View attachment 229929

View attachment 229930

View attachment 229931

View attachment 229932

View attachment 229933

View attachment 229934

View attachment 229935

 

[Guest]

Interesting!!


You don't need....but good luck

 

[papa 695]

Very nice Jason I will watch this

 

[yak face]

Nice one jason, by all accounts its the best 1/48 tornado available. I had an airfix one too , it got sold -it was a proper dog of a kit!! Looking forward to this one ,cheers tony

 

[Guest]

Great idea, will be watching this one

 

[flyjoe180]

Great stuff Jason, looking forward to seeing this beauty build up. Welcome to the Ripples too

 

[Wendall]

First Tonka update.


It is an impressive looking kit in the box. Lots of fine panel detail and most of the parts required to turn it into a Brit Tornado. One of the things that put me off of starting this kit ages ago, was what I thought looked a complicated construction process. Especially the main Fuselage and wings. The basic fuselage shape alone consists of nine separate pieces. Its eleven bits of plastic of various sizes to build up the huge tail and the basic wing assembly not including flaps and slats looks fairly complex.


With all of those components required to achieve what would usually take 6-8 parts I was naturally concerned about fit issues add that to lots of seemingly unfinished build threads on tinterweb and I really thought that this Tornado although beautiful on the sprues could be a dog to build.


The truth of it is, as long as you dry fit, clean up the minimal flash properly, pay CAREFUL attention to the slightly confusing instructions and dry fit again. It should go together very well.


Here are some shots of my progress so far:


View attachment 117661

View attachment 117662

View attachment 117663



Cockpit tub built using the kit decals. I have resisted the urge to buy any PE for this build. The kit seats are adequate but are slightly clunky looking to my eye. I had two Resin jobbies already painted which I had bought for the old Airfix Tornado which defeated me. So these were touched up and kit decals added to the head boxes.


View attachment 117664

View attachment 117665

View attachment 117666



As I have said the fit overall is very good as long as you take it steady and check everything twice. The only weak area I have found so far are the intakes. Didn't matter what I tried, I couldn't get them to fit properly so a bit of sanding, filling and re-scribing was required In this area.


View attachment 117667



Here is the load out. Three 1500 Gal wing tanks. The two kit tanks have had the detail removed as this didn't match up with images I have of the real thing. I also added two extra fins to each tank as per my references. The third tank is another salvage item from the Airfix kit. I am going to be adding some Archer rivets to all three before painting. The Sky Shadow and BOZ pod are both from the Revell kit and are nicely represented. The Boz pod needs the rear end cutting off and turning 90' and I have blanked of the end. The 1000lb bombs are from the spares box.


View attachment 117668



The instructions say 40g in the nose to stop it tail sitting. I have been using this stuff which I got from John. Its a bit messy but you can stuff it in the smallest gaps and even put it in through a small inconspicuous hole in the nose wheel well if you haven't used enough to begin with


View attachment 117669



And finally the kit decals provide very few stencils and the ones that they do are in German so I ordered up a set of these. Enough to do two airframes in here so another Tornado is looking very likely in the future.


Thanks for stopping by


Jason

View attachment 230684

View attachment 230685

View attachment 230686

View attachment 230687

View attachment 230688

View attachment 230689

View attachment 230690

View attachment 230691

View attachment 230692

 

[yak face]

Great looking cockpit jason , im glad you didnt use any pe , it looks just as good ( better actually as its not 2 dimensional) . The airframe is coming along nicely too , looks a good kit to me, cheers tony

 

[rickoshea52]

Great to have you along Jason and especially a Tonka. I have the italeri offering but it doesn't have the flaps & slats options that the revell version does, will you build her with them deployed?

 

[Guest]

Nice work! The cockpit looking great.


Ahhhh...and a detailed thread...I love it

 

[papa 695]

some great work there so far Jason

 

[flyjoe180]

Some really good work so far Jason, awesome stuff.

 

[Guest]

That's great work Jason & you've answered some of my questions that I had about building this kit - dunno why manufacturers seem obsessed with ' modular ' kits these days. One small mistake early on & things are scuppered further along the line.. anyway, enough of my ramblings!

 

[Wendall]

Nice to have you all along for the ride. Thanks for the kind comments.

I have the italeri offering but it doesn't have the flaps & slats options that the revell version does, will you build her with them deployed?

Oh yes Rick! Slats, flaps, air brakes and IFR probe if I can find one. This Tonka's gonna have it all hanging out

That's great work Jason & you've answered some of my questions that I had about building this kit - dunno why manufacturers seem obsessed with ' modular ' kits these days. One small mistake early on & things are scuppered further along the line.. anyway, enough of my ramblings!

Glad my ramblings have been useful Patrick. It's definitely a good kit(and very reasonably priced)I've pondered the modular approach and sort of concluded that it might make tooling different variants easier. Not sure how that would apply to the Tornado though??? But you're right, one small error early in construction and you're tearing your hair out several steps later. Keeps you on yer toes though!


Jason

 

[Wendall]

After some advice please fellas! I can't find any definitive reference pics, am I right in thinking that theses sway brace? Thingys on the pylons should be removed on an RAF Tornado?


View attachment 117773

View attachment 117774



Jason.

View attachment 230796

View attachment 230797

 

[rickoshea52]

I'd be inclined to keep the tabs at the top where the pylon mates against the wing and also keep or scratch build a replacement set of pads for the bottom where the stores attach. I think it might depend on what store is being carried, a quick google search for "boz pod pylon" brings up a variety of different fittings.


I never worked on tonkas but occasionally we'd get a Nimrod with a boz/chaff pod still fitted into the hangar and I distinctly remember these steadies on the pylon. I haven't seen an example on a tonka but the gaps between the pylon and wing were sealed with speed tape on nimrods.

 

[Wendall]

Cheers Rick, I'll leave them as they are then I think.

 

[rickoshea52]

I did a quick search and the top tabs should remain but the bottom tabs could be removed going by the pictures in the links below.


http://rogerritter.com/images/aviation/Mi8-Tornado/File0013.jpg


http://rogerritter.com/images/aviation/Mi8-Tornado/File0012.jpg


http://www.zone-five.net/showthread.php?p=283224


http://www.b-domke.de/AviationImages/Tornado/3421.html

 

[Guest]

Nice work, this is going to be a good aircraft by the looks of it. Like your interior shots

 

[Wendall]

Cheers Rick, I'll cut them off then I think


Cheers Dougie.