Theme editor

Scale Model Shop

Pesky dust and blowing it away

BattleshipBob

Active member
SMF Supporters
Joined
Apr 28, 2018
Messages
7,036
Reaction score
551
Points
113
Age
65
First Name
Bob
Location
Cardiff
1/3
Thread owner
Despite my best efforts, dust and tiny hairs usually make a appearance and always after painting!

Can you get a airblowing gun, like the ones I used on trucks to blow dust etc off components etc. Or can a airbrush produce enough air pressure to blow the stuff off??
 
Last edited:
Despite my best efforts, dust and tiny hairs usually make a appearance and always after painting!

Can you get a airblowing gun, like the ones I used on trucks to blow dust etc off components etc. Or can a airbrush produce enough air pressure to blow the stuff off??
I would think so Bob, other than that, remove the gun and use the hose, that will blow any dust away.
 
The little cordless Dspiae vac can also be used as a blower, you fit a small nozzle /tube /hose (included) to the rear exhaust vent and it acts as a nice blower to clear dust, etc. See previous vid I did here....
YT clip on Dspiae vac/blower
Vids only 10 mins long and if you go to the 3min mark I discuss the air blower function.
Cheers
 
Thread owner
The little cordless Dspiae vac can also be used as a blower, you fit a small nozzle /tube /hose (included) to the rear exhaust vent and it acts as a nice blower to clear dust, etc. See previous vid I did here....
YT clip on Dspiae vac/blower
Vids only 10 mins long and if you go to the 3min mark I discuss the air blower function.
Cheers
Ta very much, being a Dspiae stalker I have one. I'll give it a go!
 
A junk or broken airbrush should make a decent blower, I use one that came free with my first compressor.
You may need to crank the pressure up.
 
Thread owner
A junk or broken airbrush should make a decent blower, I use one that came free with my first compressor.
You may need to crank the pressure up.
Thanks Andy, noticed you can also get battery powered hand held ones, about a tenner?
 
Something like that might work, but I'm not sure how much puff they have.
 
Back
Top