G
Any ideas?
You seem to have edited out your question.
From what I saw last night I'd wager on a problem with the paint. Have you tried giving it a good stir just in case it's settled heavily and shaking doesn't cut it?
I'd try stirring for a minute, letting it sit for 10 to homogenise, then stir / shake again.
Has it got really cold at any time? Anything below about 4°C can ruin water based paint.
From what I saw last night I'd wager on a problem with the paint. Have you tried giving it a good stir just in case it's settled heavily and shaking doesn't cut it?
I'd try stirring for a minute, letting it sit for 10 to homogenise, then stir / shake again.
Has it got really cold at any time? Anything below about 4°C can ruin water based paint.
Any ideas about what ?
Are you having a problem ?
G
Yes, with my airbrush
It helps if you explain what the problem is , because without any idea the first questions would be
1. is it attached to a compressor?
2, is it set to the correct pressure for the paint ?
3. what paint ?
4. have you thinned the paint ?
5. if so , what make and model of thinners did you use ?
Going to need more info to get to the bottom of this.
G
I’ve attached the airbrush to the compressor now and it seems to be working fine now. Thanks
G
Only if the compressor is switched on, otherwise you won’t get far :thumb2:That usually helps.
Pete
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.